Les Inscriptions à la Bibliothèque sont ouvertes en
ligne via le site: https://biblio.enp.edu.dz
Les Réinscriptions se font à :
• La Bibliothèque Annexe pour les étudiants en
2ème Année CPST
• La Bibliothèque Centrale pour les étudiants en Spécialités
A partir de cette page vous pouvez :
Retourner à l'écran de résultat de la dernière recherche | Consulter l'historique des recherches | Retourner au premier écran avec les recherches... |
Détail de l'indexation
624 : Constructions du génie civil et du bâtiment. Infrastructures. Ouvrages en terres. Fondations. Tunnels. Ponts et charpentes
624.01 Structures et éléments de structures d'après les matériaux et procédés de construction
624.012.45 Structures en béton armé. Structures mixtes acier et béton armé
624.03 Dimensions, permanence, localisation et forme de la structure
624.1 Infrastructures.Ouvrages en terre. Fondations. Tunnels
624.13 Géotechnique. Mécanique des sols. Ouvrages en terre. Techniques de congélation des terrains
624.131 Mécanique des sols. Technologie des sols.Etudes techniques et économiques
624.131.5 Statique des sols. Dynamiques des sols
624.132 Excavations et transport des sols. Terrassements
624.151
624.17
624.176/555
624.19 Tunnels. Constructions de tunnels. Galeries. Constructions de galeries
624.2
624.2/.8 Pont. Bâtiment
624/621.24
624/621.34
624/621.34/630
624/627
624/630
624.012.45 Structures en béton armé. Structures mixtes acier et béton armé
624.03 Dimensions, permanence, localisation et forme de la structure
624.1 Infrastructures.Ouvrages en terre. Fondations. Tunnels
624.13 Géotechnique. Mécanique des sols. Ouvrages en terre. Techniques de congélation des terrains
624.131 Mécanique des sols. Technologie des sols.Etudes techniques et économiques
624.131.5 Statique des sols. Dynamiques des sols
624.132 Excavations et transport des sols. Terrassements
624.151
624.17
624.176/555
624.19 Tunnels. Constructions de tunnels. Galeries. Constructions de galeries
624.2
624.2/.8 Pont. Bâtiment
624/621.24
624/621.34
624/621.34/630
624/627
624/630
Ouvrages de la bibliothèque en indexation 624
Affiner la rechercheAutomatic computation of the knot area ratio for machine strength grading of Douglas-fir and Spruce timber / Guillaume Roblot in European journal of environmental and civil engineering, Vol. 14 N° 10 (Octobre 2010)
[article]
in European journal of environmental and civil engineering > Vol. 14 N° 10 (Octobre 2010) . - pp. 1317-1332
Titre : Automatic computation of the knot area ratio for machine strength grading of Douglas-fir and Spruce timber Type de document : texte imprimé Auteurs : Guillaume Roblot, Auteur ; Laurent Bléron, Auteur ; Fabrice Mériaudeau, Auteur Année de publication : 2011 Article en page(s) : pp. 1317-1332 Note générale : Génie Civil Langues : Anglais (eng) Mots-clés : Knot area ratio Strength grading Optical scanning Structural wood MOR Index. décimale : 624 Constructions du génie civil et du bâtiment. Infrastructures. Ouvrages en terres. Fondations. Tunnels. Ponts et charpentes Résumé : The knot area ratio (KAR) is well known to show good correlation with the strength of wood boards. However up to now no system was able to compute it automatically in order to use it in an industrial application. This paper introduces a new method which allows matching the knots from the 4 faces of wood boards. This method is based on the detection of knots by an optical scanner. The knots matching computation is validated through a complete study and tested over 451 structural lumbers (Douglas-fir (Pseudotsuga menziesii) and Spruce (Picea excelsa)). The correlation between the module of rupture and the KAR is also investigated on these samples, as well as the impact on the settings of grading machine (EN 14081).The study shows that coupling a scanner with a standard MOE measurement can significantly improve the grading results. DEWEY : 624 ISSN : 1964-8189 En ligne : http://ejece.revuesonline.com/resnum.jsp [article] Automatic computation of the knot area ratio for machine strength grading of Douglas-fir and Spruce timber [texte imprimé] / Guillaume Roblot, Auteur ; Laurent Bléron, Auteur ; Fabrice Mériaudeau, Auteur . - 2011 . - pp. 1317-1332.
Génie Civil
Langues : Anglais (eng)
in European journal of environmental and civil engineering > Vol. 14 N° 10 (Octobre 2010) . - pp. 1317-1332
Mots-clés : Knot area ratio Strength grading Optical scanning Structural wood MOR Index. décimale : 624 Constructions du génie civil et du bâtiment. Infrastructures. Ouvrages en terres. Fondations. Tunnels. Ponts et charpentes Résumé : The knot area ratio (KAR) is well known to show good correlation with the strength of wood boards. However up to now no system was able to compute it automatically in order to use it in an industrial application. This paper introduces a new method which allows matching the knots from the 4 faces of wood boards. This method is based on the detection of knots by an optical scanner. The knots matching computation is validated through a complete study and tested over 451 structural lumbers (Douglas-fir (Pseudotsuga menziesii) and Spruce (Picea excelsa)). The correlation between the module of rupture and the KAR is also investigated on these samples, as well as the impact on the settings of grading machine (EN 14081).The study shows that coupling a scanner with a standard MOE measurement can significantly improve the grading results. DEWEY : 624 ISSN : 1964-8189 En ligne : http://ejece.revuesonline.com/resnum.jsp Automatic DR structural analysis of snap-through and snap-back using optimized load increments / M. Rezaiee-Pajand in Journal of structural engineering, Vol. 137 N° 1 (Janvier 2011)
[article]
in Journal of structural engineering > Vol. 137 N° 1 (Janvier 2011) . - pp. 109-116
Titre : Automatic DR structural analysis of snap-through and snap-back using optimized load increments Type de document : texte imprimé Auteurs : M. Rezaiee-Pajand, Auteur ; J. Alamatian, Auteur Année de publication : 2011 Article en page(s) : pp. 109-116 Note générale : Génie Civil Langues : Anglais (eng) Mots-clés : Numerical models Energy Nonlinear analysis Structural analysis Load factors Index. décimale : 624 Constructions du génie civil et du bâtiment. Infrastructures. Ouvrages en terres. Fondations. Tunnels. Ponts et charpentes Résumé : In this paper, new schemes are presented for the dynamic relaxation (DR) method so that the snap-through and the snap-back regions can be traced automatically. These procedures are based on the minimization of the residual force (MRF) and minimization of the residual energy (MRE), and they are capable of updating the load factor in each DR iteration. The suggested techniques are perfectly automatic. Therefore, they do not require any additional parameters such as arc length, incremental displacement, etc. For numerical verification, some frame and truss structures, all possessing geometrical nonlinear behaviors, are analyzed. Tracing the statical path shows that both the MRF and MRE methods can be used successfully in structures with snap-through and snap-back regions. The numerical results indicate that the MRE scheme traces the statical path with a greater number of increments than the MRF. While the jumping probability of the MRE is less than that of the MRF, the analysis time may increase in the MRE. Also, a comparison between the proposed DR methods and arc-length approach shows that the MRF and MRE procedures can present the limit points with higher accuracy.
DEWEY : 624.17 ISSN : 0733-9445 En ligne : http://ascelibrary.org/sto/resource/1/jsendh/v137/i1/p109_s1?isAuthorized=no [article] Automatic DR structural analysis of snap-through and snap-back using optimized load increments [texte imprimé] / M. Rezaiee-Pajand, Auteur ; J. Alamatian, Auteur . - 2011 . - pp. 109-116.
Génie Civil
Langues : Anglais (eng)
in Journal of structural engineering > Vol. 137 N° 1 (Janvier 2011) . - pp. 109-116
Mots-clés : Numerical models Energy Nonlinear analysis Structural analysis Load factors Index. décimale : 624 Constructions du génie civil et du bâtiment. Infrastructures. Ouvrages en terres. Fondations. Tunnels. Ponts et charpentes Résumé : In this paper, new schemes are presented for the dynamic relaxation (DR) method so that the snap-through and the snap-back regions can be traced automatically. These procedures are based on the minimization of the residual force (MRF) and minimization of the residual energy (MRE), and they are capable of updating the load factor in each DR iteration. The suggested techniques are perfectly automatic. Therefore, they do not require any additional parameters such as arc length, incremental displacement, etc. For numerical verification, some frame and truss structures, all possessing geometrical nonlinear behaviors, are analyzed. Tracing the statical path shows that both the MRF and MRE methods can be used successfully in structures with snap-through and snap-back regions. The numerical results indicate that the MRE scheme traces the statical path with a greater number of increments than the MRF. While the jumping probability of the MRE is less than that of the MRF, the analysis time may increase in the MRE. Also, a comparison between the proposed DR methods and arc-length approach shows that the MRF and MRE procedures can present the limit points with higher accuracy.
DEWEY : 624.17 ISSN : 0733-9445 En ligne : http://ascelibrary.org/sto/resource/1/jsendh/v137/i1/p109_s1?isAuthorized=no Le bâtiment bâtir / Jean Calonie Gérant
[périodique]
Titre : Le bâtiment bâtir Type de document : texte imprimé Auteurs : Jean Calonie Gérant, Directeur de publication, rédacteur en chef Editeur : Paris : S.A.R.L. Année de publication : 1975-1983 ISBN/ISSN/EAN : 0395-9376 Note générale : Périodicité : Mensuel
Fusion de : "Bâtir" = ISSN 0005-6294 et de : "Le Bâtiment" = ISSN 1274-7076
Notice rédigée d'après le n°2 (Fevr. 1980)
Etat de collection : 1975-1980Langues : Français (fre) Mots-clés : Bâtiment ; Building -- France -- Periodique Index. décimale : 624 Constructions du génie civil et du bâtiment. Infrastructures. Ouvrages en terres. Fondations. Tunnels. Ponts et charpentes [périodique] Le bâtiment bâtir [texte imprimé] / Jean Calonie Gérant, Directeur de publication, rédacteur en chef . - Paris : S.A.R.L., 1975-1983.
ISSN : 0395-9376
Périodicité : Mensuel
Fusion de : "Bâtir" = ISSN 0005-6294 et de : "Le Bâtiment" = ISSN 1274-7076
Notice rédigée d'après le n°2 (Fevr. 1980)
Etat de collection : 1975-1980
Langues : Français (fre)
Mots-clés : Bâtiment ; Building -- France -- Periodique Index. décimale : 624 Constructions du génie civil et du bâtiment. Infrastructures. Ouvrages en terres. Fondations. Tunnels. Ponts et charpentes Bâtir / Claude Mouroux
[périodique] Voir les bulletins disponibles
Titre : Bâtir Type de document : texte imprimé Auteurs : Claude Mouroux, Directeur de publication, rédacteur en chef Editeur : Paris : Société nationale de propagande et de diffusion des techniques du bâtiment Année de publication : 1950-1975 ISBN/ISSN/EAN : 0005-6294 Note générale : Périodicité: Mensuelle
Publié avec : "Structura" = ISSN 0491-189X. Fusionné avec : "Le Bâtiment" = ISSN 1274-7076.
Pour donner : "Le Bâtiment, Bâtir" = ISSN 0395-9376.
Etat de collection : 1973-1975Langues : Français (fre) Mots-clés : Construction ; Bâtiment ; Matériaux ; Infrastructures Index. décimale : 624 Constructions du génie civil et du bâtiment. Infrastructures. Ouvrages en terres. Fondations. Tunnels. Ponts et charpentes DEWEY : 624/690 [périodique] Voir les bulletins disponibles Bâtir [texte imprimé] / Claude Mouroux, Directeur de publication, rédacteur en chef . - Paris : Société nationale de propagande et de diffusion des techniques du bâtiment, 1950-1975.
ISSN : 0005-6294
Périodicité: Mensuelle
Publié avec : "Structura" = ISSN 0491-189X. Fusionné avec : "Le Bâtiment" = ISSN 1274-7076.
Pour donner : "Le Bâtiment, Bâtir" = ISSN 0395-9376.
Etat de collection : 1973-1975
Langues : Français (fre)
Mots-clés : Construction ; Bâtiment ; Matériaux ; Infrastructures Index. décimale : 624 Constructions du génie civil et du bâtiment. Infrastructures. Ouvrages en terres. Fondations. Tunnels. Ponts et charpentes DEWEY : 624/690 Bearing strength of cold-formed steel bolted connections using oversized holes without washers / Cheng Yu in Journal of structural engineering, Vol. 137 N° 1 (Janvier 2011)
[article]
in Journal of structural engineering > Vol. 137 N° 1 (Janvier 2011) . - pp. 156-159
Titre : Bearing strength of cold-formed steel bolted connections using oversized holes without washers Type de document : texte imprimé Auteurs : Cheng Yu, Auteur ; Xu, Ke, Auteur ; Ibraheem Sheerah, Auteur Année de publication : 2011 Article en page(s) : pp. 156-159 Note générale : Génie Civil Langues : Anglais (eng) Mots-clés : Cold-formed steel Bearing strength Bolted connection Index. décimale : 624 Constructions du génie civil et du bâtiment. Infrastructures. Ouvrages en terres. Fondations. Tunnels. Ponts et charpentes Résumé : This note presents an experimental study of the bearing strength of cold-formed steel (CFS) bolted connections using oversized holes without washers. The test parameters include the sheet thickness, the connection type, the number of bolts, and the bolt diameter. The test results indicate that the use of oversized holes without washers will cause excessive connection deformation and reduce the connection strength. Based on the test data, a new design method is developed to accurately determine the bearing strength of CFS bolted connections when oversized hole is used without washers.
DEWEY : 624.17 ISSN : 0733-9445 En ligne : http://ascelibrary.org/sto/resource/1/jsendh/v137/i1/p156_s1?isAuthorized=no [article] Bearing strength of cold-formed steel bolted connections using oversized holes without washers [texte imprimé] / Cheng Yu, Auteur ; Xu, Ke, Auteur ; Ibraheem Sheerah, Auteur . - 2011 . - pp. 156-159.
Génie Civil
Langues : Anglais (eng)
in Journal of structural engineering > Vol. 137 N° 1 (Janvier 2011) . - pp. 156-159
Mots-clés : Cold-formed steel Bearing strength Bolted connection Index. décimale : 624 Constructions du génie civil et du bâtiment. Infrastructures. Ouvrages en terres. Fondations. Tunnels. Ponts et charpentes Résumé : This note presents an experimental study of the bearing strength of cold-formed steel (CFS) bolted connections using oversized holes without washers. The test parameters include the sheet thickness, the connection type, the number of bolts, and the bolt diameter. The test results indicate that the use of oversized holes without washers will cause excessive connection deformation and reduce the connection strength. Based on the test data, a new design method is developed to accurately determine the bearing strength of CFS bolted connections when oversized hole is used without washers.
DEWEY : 624.17 ISSN : 0733-9445 En ligne : http://ascelibrary.org/sto/resource/1/jsendh/v137/i1/p156_s1?isAuthorized=no Behavior of bidirectional spring unit in isolated floor systems / Shenlei Cui in Journal of structural engineering, Vol. 136 N° 8 (Août 2010)
PermalinkBehavior of cold bend pipes under bending loads / M. Sen in Journal of structural engineering, Vol. 137 N° 5 (Mai 2011)
PermalinkBehavior of hollow tubular-flange girder systems for curved bridges / Jun Dong in Journal of structural engineering, Vol. 136 N° 2 (Fevrier 2010)
PermalinkBehavior of prestressed steel beams / B. Belletti in Journal of structural engineering, Vol. 136 N° 9 (Septembre 2010)
PermalinkBehavior of steel fiber-reinforced high-strength concrete columns under uniaxial compression / P. Paultre in Journal of structural engineering, Vol. 136 N° 10 (Octobre 2010)
PermalinkBehaviour of an old masonry tunnel due to tunnelling-induced ground settlement / H. Mohamad in Géotechnique, Vol. 60 N° 12 (Décembre 2010)
PermalinkBehaviour of slag cement concrete under restraint conditions / Aveline Darquennes in European journal of environmental and civil engineering, Vol. 15 N° 5 (Mai 2011)
PermalinkBenchmark of constitutive models for unsaturated soils / F. D'Onza in Géotechnique, Vol. 61 N° 4 (Avril 2011)
PermalinkBenchmark of experimental techniques for measuring and controlling suction / A. Tarantino in Géotechnique, Vol. 61 N° 4 (Avril 2011)
PermalinkBétons autoplaçants à haute température / Hanaa Fares in European journal of environmental and civil engineering, Vol. 14 N° 1 (Janvier 2010)
Permalink