Les Inscriptions à la Bibliothèque sont ouvertes en
ligne via le site: https://biblio.enp.edu.dz
Les Réinscriptions se font à :
• La Bibliothèque Annexe pour les étudiants en
2ème Année CPST
• La Bibliothèque Centrale pour les étudiants en Spécialités
A partir de cette page vous pouvez :
Retourner au premier écran avec les recherches... |
Détail de l'indexation
621.47
621 Ingénierie mécanique en général. Technologie nucléaire. Ingénierie électrique. Machinerie
621.01 Théorie de l'ingénierie mécanique. La mécanique comme base de l'ingénierie mécanique
621.039 Science nucléaire appliquée. Energie atomique et industrie atomique. Ingénierie nucléaire en général
621.042
621.2/621.5
621.22 Energie hydraulique. Force hydraulique. Machines hydrauliques
621.224 Turbines hydraulique. Force hydraulique. Machines hydrauliques
621.3 Ingénierie électrique
621.3.038 équipements électrique
621.3.049 Construction de circuit électrique
621.3/016
621.3/530
621.3/537
621.31 Production,approvisionnement et contrôle de l'électricité.Machines et appareils électriques.Mesure électrique.Magnétisme et électrostatique appliquées
621.311 Production et approvisionnement en énergie électrique. Usines génératrices. Systèmes, équipement et disposition d'approvisionnement en énergie électrique. Schémas d'électrification
621.311 TEC Production et approvisionnemnt en énergie électrique. Usines génératrices. Système, équipement et disposition d'approvisionnement en énergie électrique.Usines génératrices.systémes ,équipement en énergie électrique. Schémas d'électrification
621.311.1 Résaux d'approvisionnement du point de vue de la distribution d'énergie .Résaux et grilles régionaux.Districts d'approvisionnet.Sous-stations.Schémas d'électrification
621.311.24 Industrie de énergétique au départ de sources d'énergie naturelles
621.311.243 Industrie de l'énergie solaire. Collecteurs solaires (systèmes de miroirs, fours solaires). Piles photovoltaïques
621.311.25 Industrie de l'énergie nucléaire (atomique)
621.313 Machines électriques
621.313.13 Machines électriques. Moteurs
621.314.5 Transformation du courant alternatif en courant continu et inversement. Convertisseurs. Inverseurs
621.315 Transmission de l'énergie électrique. Distribution de l'énergie et lignes de télécommunication
621.315.5 Conducteurs et semi-conducteurs selon le matériau
621.315.6 Mtériaux isolants
621.315.61 Matériaux isolants. Matériaux diélectriques
621.317 Mesure électrique (appareils et instruments)
621.317.3 Mesure des grandeurs électriques
621.317.34 Mesure des caractéristiques de transmission des réseaux et des lignes
621.318 Magnétisme appliqué.Matériaux et appareils magnétiques. Bobines.Relais
621.318.1 Matériaux magnétiques en général
621.319.1 Ferro-électricité appliquée réseaux
621.319/001.64
621.32 Sources de lumiére électrique
621.34
621.34/551.4
621.34/621.38
621.34/624
621.34/624/621.38
621.34/624/660
621.355.2 Accumulateurs en plomb (acide-plomb) en générale
621.357 Electrochimie industrielle . Electrolyse . Electrodéposition
621.36 Thermoélectricité.Chauffage électrique production d'électricité par la chaleur.Générateur thermoélectriques
621.36/7/05
621.362 Production d'électricité par la chaleur. Générateurs thermoélectriques
621.37 Technique des ondes électriques, des ondes électromagnétiques, des oscillations et impulsions électriques
621.377 Dispositifs électriques de stockage de l'information (mémoires)
621.38 Dispositifs électroniques. Tubes à électrons. Photocellules. Accélérateurs de particules. Tubes à rayons X
621.38/621.381
621.38/629.13
621.381
621.381/001
621.381/001.6
621.382 Dispositifs électroniques utilisant les effets des corps solides. Dispositifs semi-conducteurs
621.385.833 Microscope électronique. Caméras de diffraction.
621.39 Télécommunication. Télégraphie. Téléphonie. Radiocommunication. Technologie et équipement vidéo. Télécontrôle
621.391 Notions générales sur l'ingénierie des communications électriques. Cybernétique. Théorie de l'information, théorie des signaux (en connexion avec la technique des télécommunications électriques)
621.391.82 Perturbations.Interférence.Statique
621.391.837 Qualité de l'image due aux transducteurs de transmission et de réception. Résolution de l'image. Fantômes. Distorsion géométrique. Brillance. Contraste. Effets dynamiques. Modèle d'interférence...
621.396 Appareils et méthodes de radio-communication(radio).
621.396.67 Antennes. Antennes radio. Système de mise en terre
621.396.96 Radar ( (radiolocalisation)
621.397 Technologie vidéo. Ingénierie de la télévision. Enregistrement vidéo, transmission et reproduction. Equipements et réseau vidéo
621.397.13 Télévision
621.4 Moteurs thermiques
621.43 moteurs à combustion interne. Moteurs à explosions
621.436.1 Moteurs Diesel dans le sens étroit du mot
621.438 Turbines de combustion. Turbines à gaz. Turbines à huile
621.45 Moteurs à réaction . Réacteurs
621.48
621.5 Energie pneumatique. Machinerie et outils. Réfrigération
621.51 Compression et impulsion de l'air et autres gaz. Compresseurs. Ventilateur à haute pression
621.52 Réfaction de l'air et des autres gaz. Pompes à air. Exhausteur. Raréfacteur. Pompes à vide
621.56 Réfrigération en général. Production de basse température
621.64 Installation de stockage et de distribution des fluides. Conteneurs, conduits, tuyaux.
621.67 Pompes centrifuges et turbo-pompes
621.7 Technologie mécanique en général. Procédés. Outillages. Machines. Equipement
621.74 Travail de fonderie. Disposition et équipement de la fonderie. Moulage et fusion
621.762 Métallurgie des poudres
621.791 Soudure et techniques analogues
621.791/.792 Assemblage des matériaux
621.793/795 Traitement de finition des surfaces
621.8
621.861 Poulies et palans. Appareil de levage. Palans
621.865.8 Manipulateurs, robots industriels
621.89 Lubrification. Lubrifiants. Dispositifs de lubrification
621.891 Généralités. Frottement dans les machines. Propriétés des lubrifiants
621.9
621/336
621/530
621/621.3/621.48
621/651.8
621.01 Théorie de l'ingénierie mécanique. La mécanique comme base de l'ingénierie mécanique
621.039 Science nucléaire appliquée. Energie atomique et industrie atomique. Ingénierie nucléaire en général
621.042
621.2/621.5
621.22 Energie hydraulique. Force hydraulique. Machines hydrauliques
621.224 Turbines hydraulique. Force hydraulique. Machines hydrauliques
621.3 Ingénierie électrique
621.3.038 équipements électrique
621.3.049 Construction de circuit électrique
621.3/016
621.3/530
621.3/537
621.31 Production,approvisionnement et contrôle de l'électricité.Machines et appareils électriques.Mesure électrique.Magnétisme et électrostatique appliquées
621.311 Production et approvisionnement en énergie électrique. Usines génératrices. Systèmes, équipement et disposition d'approvisionnement en énergie électrique. Schémas d'électrification
621.311 TEC Production et approvisionnemnt en énergie électrique. Usines génératrices. Système, équipement et disposition d'approvisionnement en énergie électrique.Usines génératrices.systémes ,équipement en énergie électrique. Schémas d'électrification
621.311.1 Résaux d'approvisionnement du point de vue de la distribution d'énergie .Résaux et grilles régionaux.Districts d'approvisionnet.Sous-stations.Schémas d'électrification
621.311.24 Industrie de énergétique au départ de sources d'énergie naturelles
621.311.243 Industrie de l'énergie solaire. Collecteurs solaires (systèmes de miroirs, fours solaires). Piles photovoltaïques
621.311.25 Industrie de l'énergie nucléaire (atomique)
621.313 Machines électriques
621.313.13 Machines électriques. Moteurs
621.314.5 Transformation du courant alternatif en courant continu et inversement. Convertisseurs. Inverseurs
621.315 Transmission de l'énergie électrique. Distribution de l'énergie et lignes de télécommunication
621.315.5 Conducteurs et semi-conducteurs selon le matériau
621.315.6 Mtériaux isolants
621.315.61 Matériaux isolants. Matériaux diélectriques
621.317 Mesure électrique (appareils et instruments)
621.317.3 Mesure des grandeurs électriques
621.317.34 Mesure des caractéristiques de transmission des réseaux et des lignes
621.318 Magnétisme appliqué.Matériaux et appareils magnétiques. Bobines.Relais
621.318.1 Matériaux magnétiques en général
621.319.1 Ferro-électricité appliquée réseaux
621.319/001.64
621.32 Sources de lumiére électrique
621.34
621.34/551.4
621.34/621.38
621.34/624
621.34/624/621.38
621.34/624/660
621.355.2 Accumulateurs en plomb (acide-plomb) en générale
621.357 Electrochimie industrielle . Electrolyse . Electrodéposition
621.36 Thermoélectricité.Chauffage électrique production d'électricité par la chaleur.Générateur thermoélectriques
621.36/7/05
621.362 Production d'électricité par la chaleur. Générateurs thermoélectriques
621.37 Technique des ondes électriques, des ondes électromagnétiques, des oscillations et impulsions électriques
621.377 Dispositifs électriques de stockage de l'information (mémoires)
621.38 Dispositifs électroniques. Tubes à électrons. Photocellules. Accélérateurs de particules. Tubes à rayons X
621.38/621.381
621.38/629.13
621.381
621.381/001
621.381/001.6
621.382 Dispositifs électroniques utilisant les effets des corps solides. Dispositifs semi-conducteurs
621.385.833 Microscope électronique. Caméras de diffraction.
621.39 Télécommunication. Télégraphie. Téléphonie. Radiocommunication. Technologie et équipement vidéo. Télécontrôle
621.391 Notions générales sur l'ingénierie des communications électriques. Cybernétique. Théorie de l'information, théorie des signaux (en connexion avec la technique des télécommunications électriques)
621.391.82 Perturbations.Interférence.Statique
621.391.837 Qualité de l'image due aux transducteurs de transmission et de réception. Résolution de l'image. Fantômes. Distorsion géométrique. Brillance. Contraste. Effets dynamiques. Modèle d'interférence...
621.396 Appareils et méthodes de radio-communication(radio).
621.396.67 Antennes. Antennes radio. Système de mise en terre
621.396.96 Radar ( (radiolocalisation)
621.397 Technologie vidéo. Ingénierie de la télévision. Enregistrement vidéo, transmission et reproduction. Equipements et réseau vidéo
621.397.13 Télévision
621.4 Moteurs thermiques
621.43 moteurs à combustion interne. Moteurs à explosions
621.436.1 Moteurs Diesel dans le sens étroit du mot
621.438 Turbines de combustion. Turbines à gaz. Turbines à huile
621.45 Moteurs à réaction . Réacteurs
621.48
621.5 Energie pneumatique. Machinerie et outils. Réfrigération
621.51 Compression et impulsion de l'air et autres gaz. Compresseurs. Ventilateur à haute pression
621.52 Réfaction de l'air et des autres gaz. Pompes à air. Exhausteur. Raréfacteur. Pompes à vide
621.56 Réfrigération en général. Production de basse température
621.64 Installation de stockage et de distribution des fluides. Conteneurs, conduits, tuyaux.
621.67 Pompes centrifuges et turbo-pompes
621.7 Technologie mécanique en général. Procédés. Outillages. Machines. Equipement
621.74 Travail de fonderie. Disposition et équipement de la fonderie. Moulage et fusion
621.762 Métallurgie des poudres
621.791 Soudure et techniques analogues
621.791/.792 Assemblage des matériaux
621.793/795 Traitement de finition des surfaces
621.8
621.861 Poulies et palans. Appareil de levage. Palans
621.865.8 Manipulateurs, robots industriels
621.89 Lubrification. Lubrifiants. Dispositifs de lubrification
621.891 Généralités. Frottement dans les machines. Propriétés des lubrifiants
621.9
621/336
621/530
621/621.3/621.48
621/651.8
Ouvrages de la bibliothèque en indexation 621.47
Affiner la rechercheThermodynamic cycles for a small particle heat exchange receiver used in concentrating solar power plants / Kyle Kitzmiller in Transactions of the ASME. Journal of solar energy engineering, Vol. 133 N° 3 (N° Spécial) (Août 2011)
[article]
in Transactions of the ASME. Journal of solar energy engineering > Vol. 133 N° 3 (N° Spécial) (Août 2011) . - 08 p.
Titre : Thermodynamic cycles for a small particle heat exchange receiver used in concentrating solar power plants Type de document : texte imprimé Auteurs : Kyle Kitzmiller, Auteur ; Fletcher Miller, Auteur Année de publication : 2012 Article en page(s) : 08 p. Note générale : Solar energy Langues : Anglais (eng) Mots-clés : Brayton cycle Convection Fossil fuels Heat exchangers Hybrid power systems Solar energy concentrators Solar power Solar power stations Index. décimale : 621.47 Résumé : Gas-cooled solar receivers for concentrating solar power plants are capable of providing high temperature, pressurized gas for electrical power generation via a Brayton cycle. This can be accomplished by expanding hot, pressurized gas directly through a turbine, or through using a heat exchanger to indirectly heat pressurized air. Gas-cooled receivers can be divided into two basic technologies. In tube based solar receivers, thermal energy is transferred to air through convection with the heated tube wall. This limits receiver efficiency since the tube wall needs to be substantially hotter than the gas inside due to the relatively poor gas heat transfer coefficient. In volumetric receivers, solar energy is absorbed within a volume, rather than on a surface. The absorption volume can be filled with ceramic foam, wires, or particles to act as the absorbing medium. In a small particle heat exchange receiver, for example, submicron sized particles absorb solar radiation and transfer this energy as heat to a surrounding fluid. This effectively eliminates any thermal resistance, allowing for higher receiver efficiencies. However, mechanical considerations limit the size of volumetric, pressurized gas-cooled receivers.In order to solve this problem, several thermodynamic cycles have been investigated, each of which is motivated by key physical considerations in volumetric receivers. The cyclic efficiencies are determined by a new MATLAB code based on previous Brayton cycle modeling conducted by Sandia National Laboratories. The modeling accounts for pressure drops and temperature losses in various components, and parameters such as the turbine inlet temperature and pressure ratio are easily modified to run parametric cases.The performance of a gas-cooled solar receiver is largely a function of its ability to provide process gas at a consistent temperature or pressure, regardless of variations in solar flux, which can vary due to cloud transients or apparent sun motion throughout the day. Consistent output can be ensured by combusting fuel within the cycle, effectively making a solar/fossil fuel hybrid system. Several schemes for hybridization with natural gas are considered here, including externally fired concepts and combined receiver/combustor units. Because the efficiency of hybridized cycles is a function of the solar thermal input, the part load behavior of the recuperated cycle is examined. However, off-design models are simplistic in this research, as the goal of the work is an introductory evaluation of different potential cycles. DEWEY : 621.47 ISSN : 0199-6231 En ligne : http://asmedl.org/getabs/servlet/GetabsServlet?prog=normal&id=JSEEDO000133000003 [...] [article] Thermodynamic cycles for a small particle heat exchange receiver used in concentrating solar power plants [texte imprimé] / Kyle Kitzmiller, Auteur ; Fletcher Miller, Auteur . - 2012 . - 08 p.
Solar energy
Langues : Anglais (eng)
in Transactions of the ASME. Journal of solar energy engineering > Vol. 133 N° 3 (N° Spécial) (Août 2011) . - 08 p.
Mots-clés : Brayton cycle Convection Fossil fuels Heat exchangers Hybrid power systems Solar energy concentrators Solar power Solar power stations Index. décimale : 621.47 Résumé : Gas-cooled solar receivers for concentrating solar power plants are capable of providing high temperature, pressurized gas for electrical power generation via a Brayton cycle. This can be accomplished by expanding hot, pressurized gas directly through a turbine, or through using a heat exchanger to indirectly heat pressurized air. Gas-cooled receivers can be divided into two basic technologies. In tube based solar receivers, thermal energy is transferred to air through convection with the heated tube wall. This limits receiver efficiency since the tube wall needs to be substantially hotter than the gas inside due to the relatively poor gas heat transfer coefficient. In volumetric receivers, solar energy is absorbed within a volume, rather than on a surface. The absorption volume can be filled with ceramic foam, wires, or particles to act as the absorbing medium. In a small particle heat exchange receiver, for example, submicron sized particles absorb solar radiation and transfer this energy as heat to a surrounding fluid. This effectively eliminates any thermal resistance, allowing for higher receiver efficiencies. However, mechanical considerations limit the size of volumetric, pressurized gas-cooled receivers.In order to solve this problem, several thermodynamic cycles have been investigated, each of which is motivated by key physical considerations in volumetric receivers. The cyclic efficiencies are determined by a new MATLAB code based on previous Brayton cycle modeling conducted by Sandia National Laboratories. The modeling accounts for pressure drops and temperature losses in various components, and parameters such as the turbine inlet temperature and pressure ratio are easily modified to run parametric cases.The performance of a gas-cooled solar receiver is largely a function of its ability to provide process gas at a consistent temperature or pressure, regardless of variations in solar flux, which can vary due to cloud transients or apparent sun motion throughout the day. Consistent output can be ensured by combusting fuel within the cycle, effectively making a solar/fossil fuel hybrid system. Several schemes for hybridization with natural gas are considered here, including externally fired concepts and combined receiver/combustor units. Because the efficiency of hybridized cycles is a function of the solar thermal input, the part load behavior of the recuperated cycle is examined. However, off-design models are simplistic in this research, as the goal of the work is an introductory evaluation of different potential cycles. DEWEY : 621.47 ISSN : 0199-6231 En ligne : http://asmedl.org/getabs/servlet/GetabsServlet?prog=normal&id=JSEEDO000133000003 [...] A Thermodynamic similarity framework for assessment of working fluids for solar Rankine power generation / Deborah A. Sunter in Transactions of the ASME. Journal of solar energy engineering, Vol. 132 N° 4 (Novembre 2010)
[article]
in Transactions of the ASME. Journal of solar energy engineering > Vol. 132 N° 4 (Novembre 2010) . - pp. [041005/1-8]
Titre : A Thermodynamic similarity framework for assessment of working fluids for solar Rankine power generation Type de document : texte imprimé Auteurs : Deborah A. Sunter, Auteur ; Van P. Carey, Auteur Année de publication : 2011 Article en page(s) : pp. [041005/1-8] Note générale : Energie Solaire Langues : Anglais (eng) Mots-clés : Solar Rankine Working fluid Thermodynamic similitude Index. décimale : 621.47 Résumé : Numerous studies have compared the merits of different working fluids for use in Rankine power systems. Most often, however, these have considered a limited number of specific fluids for which the thermodynamic properties are known. In the investigation summarized here, the Redlich–Kwong fluid model was used to develop a thermodynamic similarity framework that can be used as a comparative model for evaluating the performance of Rankine cycle working fluids. This can be viewed as a reduced order model that, based on thermodynamic similarity, quantifies the characteristics of the working fluids in terms of a single dimensional coordinate space defined by the choice of critical temperature. The advantage of this framework is that it allows exploration of the performance advantages of working fluids for which full thermodynamic properties are not yet available. Predictions of the model for common fluids were examined and conclusions regarding optimal fluids for solar Rankine systems are discussed.
DEWEY : 621.47 ISSN : 0199-6231 En ligne : http://asmedl.aip.org/getabs/servlet/GetabsServlet?prog=normal&id=JSEEDO00013200 [...] [article] A Thermodynamic similarity framework for assessment of working fluids for solar Rankine power generation [texte imprimé] / Deborah A. Sunter, Auteur ; Van P. Carey, Auteur . - 2011 . - pp. [041005/1-8].
Energie Solaire
Langues : Anglais (eng)
in Transactions of the ASME. Journal of solar energy engineering > Vol. 132 N° 4 (Novembre 2010) . - pp. [041005/1-8]
Mots-clés : Solar Rankine Working fluid Thermodynamic similitude Index. décimale : 621.47 Résumé : Numerous studies have compared the merits of different working fluids for use in Rankine power systems. Most often, however, these have considered a limited number of specific fluids for which the thermodynamic properties are known. In the investigation summarized here, the Redlich–Kwong fluid model was used to develop a thermodynamic similarity framework that can be used as a comparative model for evaluating the performance of Rankine cycle working fluids. This can be viewed as a reduced order model that, based on thermodynamic similarity, quantifies the characteristics of the working fluids in terms of a single dimensional coordinate space defined by the choice of critical temperature. The advantage of this framework is that it allows exploration of the performance advantages of working fluids for which full thermodynamic properties are not yet available. Predictions of the model for common fluids were examined and conclusions regarding optimal fluids for solar Rankine systems are discussed.
DEWEY : 621.47 ISSN : 0199-6231 En ligne : http://asmedl.aip.org/getabs/servlet/GetabsServlet?prog=normal&id=JSEEDO00013200 [...] Thermofluidynamic model and comparative analysis of parabolic trough collectors using oil, water/steam, or molten salt as heat transfer fluids / M. J. Montes in Transactions of the ASME. Journal of solar energy engineering, Vol. 132 N° 2 (Mai 2010)
[article]
in Transactions of the ASME. Journal of solar energy engineering > Vol. 132 N° 2 (Mai 2010) . - pp. [021001/1-7]
Titre : Thermofluidynamic model and comparative analysis of parabolic trough collectors using oil, water/steam, or molten salt as heat transfer fluids Type de document : texte imprimé Auteurs : M. J. Montes, Auteur ; A. Abanades, Auteur ; J. M. Martínez-Val, Auteur Année de publication : 2011 Article en page(s) : pp. [021001/1-7] Note générale : Energie Solaire Langues : Anglais (eng) Mots-clés : Parabolic trough Thermofluidynamic model Molten salt Oil Water/steam Energy Index. décimale : 621.47 Résumé : This paper describes the development and use of a thermofluidynamic model for parabolic trough collectors, specifically suited for carrying out systematic calculations on different design options. The model is based on detailed energy balances, and it has been applied to evaluate collector thermal performances with different working fluids: oil, molten salt, or water/steam. For each heat transfer fluid technology, four parameters have been analyzed: collector length, absorber tube diameter, working temperature, and pressure. The influence of these factors has been studied from the point of view of heat loss, pressure drop, energy, and exergy efficiencies. Exergy is considered the suitable magnitude to guide any optimization process in this field, because it accounts for all relevant energy gains and losses, characterized by their corresponding temperature and pressure. Preliminary conclusions point out that direct steam generation is more efficient than oil and molten salt systems.
DEWEY : 621.47 ISSN : 0199-6231 En ligne : http://asmedl.aip.org/getabs/servlet/GetabsServlet?prog=normal&id=JSEEDO00013200 [...] [article] Thermofluidynamic model and comparative analysis of parabolic trough collectors using oil, water/steam, or molten salt as heat transfer fluids [texte imprimé] / M. J. Montes, Auteur ; A. Abanades, Auteur ; J. M. Martínez-Val, Auteur . - 2011 . - pp. [021001/1-7].
Energie Solaire
Langues : Anglais (eng)
in Transactions of the ASME. Journal of solar energy engineering > Vol. 132 N° 2 (Mai 2010) . - pp. [021001/1-7]
Mots-clés : Parabolic trough Thermofluidynamic model Molten salt Oil Water/steam Energy Index. décimale : 621.47 Résumé : This paper describes the development and use of a thermofluidynamic model for parabolic trough collectors, specifically suited for carrying out systematic calculations on different design options. The model is based on detailed energy balances, and it has been applied to evaluate collector thermal performances with different working fluids: oil, molten salt, or water/steam. For each heat transfer fluid technology, four parameters have been analyzed: collector length, absorber tube diameter, working temperature, and pressure. The influence of these factors has been studied from the point of view of heat loss, pressure drop, energy, and exergy efficiencies. Exergy is considered the suitable magnitude to guide any optimization process in this field, because it accounts for all relevant energy gains and losses, characterized by their corresponding temperature and pressure. Preliminary conclusions point out that direct steam generation is more efficient than oil and molten salt systems.
DEWEY : 621.47 ISSN : 0199-6231 En ligne : http://asmedl.aip.org/getabs/servlet/GetabsServlet?prog=normal&id=JSEEDO00013200 [...] Trailing edge noise model validation and application to airfoil optimization / F. Bertagnolio in Transactions of the ASME. Journal of solar energy engineering, Vol. 132 N° 3 (Août 2010)
[article]
in Transactions of the ASME. Journal of solar energy engineering > Vol. 132 N° 3 (Août 2010) . - pp. [031010/1-9]
Titre : Trailing edge noise model validation and application to airfoil optimization Type de document : texte imprimé Auteurs : F. Bertagnolio, Auteur ; H. Aa. Madsen, Auteur ; C. Bak, Auteur Année de publication : 2011 Article en page(s) : pp. [031010/1-9] Note générale : Energie Solaire Langues : Anglais (eng) Mots-clés : Aerodynamics Noise abatement Noise measurement Optimisation Wind turbines Index. décimale : 621.47 Résumé : The aim of this article is twofold. First, an existing trailing edge noise model is validated by comparing with airfoil surface pressure fluctuations and far field sound pressure levels measured in three different experiments. The agreement is satisfactory in one case but poor in two other cases. Nevertheless, the model reproduces the main tendencies observed in the measurements with respect to varying flow conditions. Second, the model is implemented into an airfoil design code that is originally used for aerodynamic optimization. An existing wind turbine airfoil is optimized in order to reduce its noise emission, trying at the same time to preserve some of its aerodynamic and geometric characteristics. The new designs are characterized by less cambered airfoils and flatter suction sides. The resulting noise reductions seem to be mainly achieved by a reduction in the turbulent kinetic energy across the boundary layer near the trailing edge and to a lesser extent by a smaller boundary layer displacement thickness.
DEWEY : 621.47 ISSN : 0199-6231 En ligne : http://asmedl.aip.org/getabs/servlet/GetabsServlet?prog=normal&id=JSEEDO00013200 [...] [article] Trailing edge noise model validation and application to airfoil optimization [texte imprimé] / F. Bertagnolio, Auteur ; H. Aa. Madsen, Auteur ; C. Bak, Auteur . - 2011 . - pp. [031010/1-9].
Energie Solaire
Langues : Anglais (eng)
in Transactions of the ASME. Journal of solar energy engineering > Vol. 132 N° 3 (Août 2010) . - pp. [031010/1-9]
Mots-clés : Aerodynamics Noise abatement Noise measurement Optimisation Wind turbines Index. décimale : 621.47 Résumé : The aim of this article is twofold. First, an existing trailing edge noise model is validated by comparing with airfoil surface pressure fluctuations and far field sound pressure levels measured in three different experiments. The agreement is satisfactory in one case but poor in two other cases. Nevertheless, the model reproduces the main tendencies observed in the measurements with respect to varying flow conditions. Second, the model is implemented into an airfoil design code that is originally used for aerodynamic optimization. An existing wind turbine airfoil is optimized in order to reduce its noise emission, trying at the same time to preserve some of its aerodynamic and geometric characteristics. The new designs are characterized by less cambered airfoils and flatter suction sides. The resulting noise reductions seem to be mainly achieved by a reduction in the turbulent kinetic energy across the boundary layer near the trailing edge and to a lesser extent by a smaller boundary layer displacement thickness.
DEWEY : 621.47 ISSN : 0199-6231 En ligne : http://asmedl.aip.org/getabs/servlet/GetabsServlet?prog=normal&id=JSEEDO00013200 [...] Truncation of the secondary concentrator (CPC) as means to cost effective beam-down system / Akiba Segal in Transactions of the ASME. Journal of solar energy engineering, Vol. 132 N° 3 (Août 2010)
[article]
in Transactions of the ASME. Journal of solar energy engineering > Vol. 132 N° 3 (Août 2010) . - pp. [031004/1-4]
Titre : Truncation of the secondary concentrator (CPC) as means to cost effective beam-down system Type de document : texte imprimé Auteurs : Akiba Segal, Auteur ; Michael Epstein, Auteur Année de publication : 2011 Article en page(s) : pp. [031004/1-4] Note générale : Energie Solaire Langues : Anglais (eng) Mots-clés : Optics Solar energy concentrators Solar power stations Index. décimale : 621.47 Résumé : A central solar plant based on beam-down optics is composed of a field of heliostats, a tower reflector (hyperboloid mirror), and a ground receiver interfaced at its aperture with one or a cluster of secondary concentrators (compound parabolic concentrator). In previous publications, a method was presented, illustrating the correlation between the tower reflector position and its size on one hand and the geometry, dimensions, and reflective area of the secondary concentrator on the other hand, both related to the heliostat field reflective area. Obviously, when one wishes to reduce the size of a tower reflector by locating it closer to the upper focal point, the image created at the lower focus will be broader, resulting in a larger secondary ground concentrator. The present paper describes a method for substantial decrease in the dimensions of the ground secondary concentrator cluster (and, implicitly, the concentrator's area) via truncation and some geometrical corrections without significant sacrifice of the optical performance. This offers a method for cost effective design of future central solar plants, utilizing the beam-down optics.
DEWEY : 621.47 ISSN : 0199-6231 En ligne : http://asmedl.aip.org/getabs/servlet/GetabsServlet?prog=normal&id=JSEEDO00013200 [...] [article] Truncation of the secondary concentrator (CPC) as means to cost effective beam-down system [texte imprimé] / Akiba Segal, Auteur ; Michael Epstein, Auteur . - 2011 . - pp. [031004/1-4].
Energie Solaire
Langues : Anglais (eng)
in Transactions of the ASME. Journal of solar energy engineering > Vol. 132 N° 3 (Août 2010) . - pp. [031004/1-4]
Mots-clés : Optics Solar energy concentrators Solar power stations Index. décimale : 621.47 Résumé : A central solar plant based on beam-down optics is composed of a field of heliostats, a tower reflector (hyperboloid mirror), and a ground receiver interfaced at its aperture with one or a cluster of secondary concentrators (compound parabolic concentrator). In previous publications, a method was presented, illustrating the correlation between the tower reflector position and its size on one hand and the geometry, dimensions, and reflective area of the secondary concentrator on the other hand, both related to the heliostat field reflective area. Obviously, when one wishes to reduce the size of a tower reflector by locating it closer to the upper focal point, the image created at the lower focus will be broader, resulting in a larger secondary ground concentrator. The present paper describes a method for substantial decrease in the dimensions of the ground secondary concentrator cluster (and, implicitly, the concentrator's area) via truncation and some geometrical corrections without significant sacrifice of the optical performance. This offers a method for cost effective design of future central solar plants, utilizing the beam-down optics.
DEWEY : 621.47 ISSN : 0199-6231 En ligne : http://asmedl.aip.org/getabs/servlet/GetabsServlet?prog=normal&id=JSEEDO00013200 [...] Two-step optimization for wind turbine blade with probability approach / Ki-Hak Lee in Transactions of the ASME. Journal of solar energy engineering, Vol. 132 N° 3 (Août 2010)
PermalinkUncertainties in modeled direct irradiance around the Sahara as affected by aerosols / Christian A. Gueymard in Transactions of the ASME. Journal of solar energy engineering, Vol. 133 N° 3 (N° Spécial) (Août 2011)
PermalinkUse of a shroud and baffle to improve natural convection to immersed heat exchangers / Sandra K. S. Boetcher in Transactions of the ASME. Journal of solar energy engineering, Vol. 133 N° 1 (Fevrier 2011)
PermalinkValidation of two optical measurement methods for the qualification of the shape accuracy of mirror panels for concentrating solar systems / Tobias März in Transactions of the ASME. Journal of solar energy engineering, Vol. 133 N° 3 (N° Spécial) (Août 2011)
PermalinkWind speed estimation algorithm in the presence of observation noise / Ken Mok in Transactions of the ASME. Journal of solar energy engineering, Vol. 132 N° 1 (Janvier 2010)
Permalink