Les Inscriptions à la Bibliothèque sont ouvertes en
ligne via le site: https://biblio.enp.edu.dz
Les Réinscriptions se font à :
• La Bibliothèque Annexe pour les étudiants en
2ème Année CPST
• La Bibliothèque Centrale pour les étudiants en Spécialités
A partir de cette page vous pouvez :
Retourner au premier écran avec les recherches... |
Détail de l'indexation
621.47
621 Ingénierie mécanique en général. Technologie nucléaire. Ingénierie électrique. Machinerie
621.01 Théorie de l'ingénierie mécanique. La mécanique comme base de l'ingénierie mécanique
621.039 Science nucléaire appliquée. Energie atomique et industrie atomique. Ingénierie nucléaire en général
621.042
621.2/621.5
621.22 Energie hydraulique. Force hydraulique. Machines hydrauliques
621.224 Turbines hydraulique. Force hydraulique. Machines hydrauliques
621.3 Ingénierie électrique
621.3.038 équipements électrique
621.3.049 Construction de circuit électrique
621.3/016
621.3/530
621.3/537
621.31 Production,approvisionnement et contrôle de l'électricité.Machines et appareils électriques.Mesure électrique.Magnétisme et électrostatique appliquées
621.311 Production et approvisionnement en énergie électrique. Usines génératrices. Systèmes, équipement et disposition d'approvisionnement en énergie électrique. Schémas d'électrification
621.311 TEC Production et approvisionnemnt en énergie électrique. Usines génératrices. Système, équipement et disposition d'approvisionnement en énergie électrique.Usines génératrices.systémes ,équipement en énergie électrique. Schémas d'électrification
621.311.1 Résaux d'approvisionnement du point de vue de la distribution d'énergie .Résaux et grilles régionaux.Districts d'approvisionnet.Sous-stations.Schémas d'électrification
621.311.24 Industrie de énergétique au départ de sources d'énergie naturelles
621.311.243 Industrie de l'énergie solaire. Collecteurs solaires (systèmes de miroirs, fours solaires). Piles photovoltaïques
621.311.25 Industrie de l'énergie nucléaire (atomique)
621.313 Machines électriques
621.313.13 Machines électriques. Moteurs
621.314.5 Transformation du courant alternatif en courant continu et inversement. Convertisseurs. Inverseurs
621.315 Transmission de l'énergie électrique. Distribution de l'énergie et lignes de télécommunication
621.315.5 Conducteurs et semi-conducteurs selon le matériau
621.315.6 Mtériaux isolants
621.315.61 Matériaux isolants. Matériaux diélectriques
621.317 Mesure électrique (appareils et instruments)
621.317.3 Mesure des grandeurs électriques
621.317.34 Mesure des caractéristiques de transmission des réseaux et des lignes
621.318 Magnétisme appliqué.Matériaux et appareils magnétiques. Bobines.Relais
621.318.1 Matériaux magnétiques en général
621.319.1 Ferro-électricité appliquée réseaux
621.319/001.64
621.32 Sources de lumiére électrique
621.34
621.34/551.4
621.34/621.38
621.34/624
621.34/624/621.38
621.34/624/660
621.355.2 Accumulateurs en plomb (acide-plomb) en générale
621.357 Electrochimie industrielle . Electrolyse . Electrodéposition
621.36 Thermoélectricité.Chauffage électrique production d'électricité par la chaleur.Générateur thermoélectriques
621.36/7/05
621.362 Production d'électricité par la chaleur. Générateurs thermoélectriques
621.37 Technique des ondes électriques, des ondes électromagnétiques, des oscillations et impulsions électriques
621.377 Dispositifs électriques de stockage de l'information (mémoires)
621.38 Dispositifs électroniques. Tubes à électrons. Photocellules. Accélérateurs de particules. Tubes à rayons X
621.38/621.381
621.38/629.13
621.381
621.381/001
621.381/001.6
621.382 Dispositifs électroniques utilisant les effets des corps solides. Dispositifs semi-conducteurs
621.385.833 Microscope électronique. Caméras de diffraction.
621.39 Télécommunication. Télégraphie. Téléphonie. Radiocommunication. Technologie et équipement vidéo. Télécontrôle
621.391 Notions générales sur l'ingénierie des communications électriques. Cybernétique. Théorie de l'information, théorie des signaux (en connexion avec la technique des télécommunications électriques)
621.391.82 Perturbations.Interférence.Statique
621.391.837 Qualité de l'image due aux transducteurs de transmission et de réception. Résolution de l'image. Fantômes. Distorsion géométrique. Brillance. Contraste. Effets dynamiques. Modèle d'interférence...
621.396 Appareils et méthodes de radio-communication(radio).
621.396.67 Antennes. Antennes radio. Système de mise en terre
621.396.96 Radar ( (radiolocalisation)
621.397 Technologie vidéo. Ingénierie de la télévision. Enregistrement vidéo, transmission et reproduction. Equipements et réseau vidéo
621.397.13 Télévision
621.4 Moteurs thermiques
621.43 moteurs à combustion interne. Moteurs à explosions
621.436.1 Moteurs Diesel dans le sens étroit du mot
621.438 Turbines de combustion. Turbines à gaz. Turbines à huile
621.45 Moteurs à réaction . Réacteurs
621.48
621.5 Energie pneumatique. Machinerie et outils. Réfrigération
621.51 Compression et impulsion de l'air et autres gaz. Compresseurs. Ventilateur à haute pression
621.52 Réfaction de l'air et des autres gaz. Pompes à air. Exhausteur. Raréfacteur. Pompes à vide
621.56 Réfrigération en général. Production de basse température
621.64 Installation de stockage et de distribution des fluides. Conteneurs, conduits, tuyaux.
621.67 Pompes centrifuges et turbo-pompes
621.7 Technologie mécanique en général. Procédés. Outillages. Machines. Equipement
621.74 Travail de fonderie. Disposition et équipement de la fonderie. Moulage et fusion
621.762 Métallurgie des poudres
621.791 Soudure et techniques analogues
621.791/.792 Assemblage des matériaux
621.793/795 Traitement de finition des surfaces
621.8
621.861 Poulies et palans. Appareil de levage. Palans
621.865.8 Manipulateurs, robots industriels
621.89 Lubrification. Lubrifiants. Dispositifs de lubrification
621.891 Généralités. Frottement dans les machines. Propriétés des lubrifiants
621.9
621/336
621/530
621/621.3/621.48
621/651.8
621.01 Théorie de l'ingénierie mécanique. La mécanique comme base de l'ingénierie mécanique
621.039 Science nucléaire appliquée. Energie atomique et industrie atomique. Ingénierie nucléaire en général
621.042
621.2/621.5
621.22 Energie hydraulique. Force hydraulique. Machines hydrauliques
621.224 Turbines hydraulique. Force hydraulique. Machines hydrauliques
621.3 Ingénierie électrique
621.3.038 équipements électrique
621.3.049 Construction de circuit électrique
621.3/016
621.3/530
621.3/537
621.31 Production,approvisionnement et contrôle de l'électricité.Machines et appareils électriques.Mesure électrique.Magnétisme et électrostatique appliquées
621.311 Production et approvisionnement en énergie électrique. Usines génératrices. Systèmes, équipement et disposition d'approvisionnement en énergie électrique. Schémas d'électrification
621.311 TEC Production et approvisionnemnt en énergie électrique. Usines génératrices. Système, équipement et disposition d'approvisionnement en énergie électrique.Usines génératrices.systémes ,équipement en énergie électrique. Schémas d'électrification
621.311.1 Résaux d'approvisionnement du point de vue de la distribution d'énergie .Résaux et grilles régionaux.Districts d'approvisionnet.Sous-stations.Schémas d'électrification
621.311.24 Industrie de énergétique au départ de sources d'énergie naturelles
621.311.243 Industrie de l'énergie solaire. Collecteurs solaires (systèmes de miroirs, fours solaires). Piles photovoltaïques
621.311.25 Industrie de l'énergie nucléaire (atomique)
621.313 Machines électriques
621.313.13 Machines électriques. Moteurs
621.314.5 Transformation du courant alternatif en courant continu et inversement. Convertisseurs. Inverseurs
621.315 Transmission de l'énergie électrique. Distribution de l'énergie et lignes de télécommunication
621.315.5 Conducteurs et semi-conducteurs selon le matériau
621.315.6 Mtériaux isolants
621.315.61 Matériaux isolants. Matériaux diélectriques
621.317 Mesure électrique (appareils et instruments)
621.317.3 Mesure des grandeurs électriques
621.317.34 Mesure des caractéristiques de transmission des réseaux et des lignes
621.318 Magnétisme appliqué.Matériaux et appareils magnétiques. Bobines.Relais
621.318.1 Matériaux magnétiques en général
621.319.1 Ferro-électricité appliquée réseaux
621.319/001.64
621.32 Sources de lumiére électrique
621.34
621.34/551.4
621.34/621.38
621.34/624
621.34/624/621.38
621.34/624/660
621.355.2 Accumulateurs en plomb (acide-plomb) en générale
621.357 Electrochimie industrielle . Electrolyse . Electrodéposition
621.36 Thermoélectricité.Chauffage électrique production d'électricité par la chaleur.Générateur thermoélectriques
621.36/7/05
621.362 Production d'électricité par la chaleur. Générateurs thermoélectriques
621.37 Technique des ondes électriques, des ondes électromagnétiques, des oscillations et impulsions électriques
621.377 Dispositifs électriques de stockage de l'information (mémoires)
621.38 Dispositifs électroniques. Tubes à électrons. Photocellules. Accélérateurs de particules. Tubes à rayons X
621.38/621.381
621.38/629.13
621.381
621.381/001
621.381/001.6
621.382 Dispositifs électroniques utilisant les effets des corps solides. Dispositifs semi-conducteurs
621.385.833 Microscope électronique. Caméras de diffraction.
621.39 Télécommunication. Télégraphie. Téléphonie. Radiocommunication. Technologie et équipement vidéo. Télécontrôle
621.391 Notions générales sur l'ingénierie des communications électriques. Cybernétique. Théorie de l'information, théorie des signaux (en connexion avec la technique des télécommunications électriques)
621.391.82 Perturbations.Interférence.Statique
621.391.837 Qualité de l'image due aux transducteurs de transmission et de réception. Résolution de l'image. Fantômes. Distorsion géométrique. Brillance. Contraste. Effets dynamiques. Modèle d'interférence...
621.396 Appareils et méthodes de radio-communication(radio).
621.396.67 Antennes. Antennes radio. Système de mise en terre
621.396.96 Radar ( (radiolocalisation)
621.397 Technologie vidéo. Ingénierie de la télévision. Enregistrement vidéo, transmission et reproduction. Equipements et réseau vidéo
621.397.13 Télévision
621.4 Moteurs thermiques
621.43 moteurs à combustion interne. Moteurs à explosions
621.436.1 Moteurs Diesel dans le sens étroit du mot
621.438 Turbines de combustion. Turbines à gaz. Turbines à huile
621.45 Moteurs à réaction . Réacteurs
621.48
621.5 Energie pneumatique. Machinerie et outils. Réfrigération
621.51 Compression et impulsion de l'air et autres gaz. Compresseurs. Ventilateur à haute pression
621.52 Réfaction de l'air et des autres gaz. Pompes à air. Exhausteur. Raréfacteur. Pompes à vide
621.56 Réfrigération en général. Production de basse température
621.64 Installation de stockage et de distribution des fluides. Conteneurs, conduits, tuyaux.
621.67 Pompes centrifuges et turbo-pompes
621.7 Technologie mécanique en général. Procédés. Outillages. Machines. Equipement
621.74 Travail de fonderie. Disposition et équipement de la fonderie. Moulage et fusion
621.762 Métallurgie des poudres
621.791 Soudure et techniques analogues
621.791/.792 Assemblage des matériaux
621.793/795 Traitement de finition des surfaces
621.8
621.861 Poulies et palans. Appareil de levage. Palans
621.865.8 Manipulateurs, robots industriels
621.89 Lubrification. Lubrifiants. Dispositifs de lubrification
621.891 Généralités. Frottement dans les machines. Propriétés des lubrifiants
621.9
621/336
621/530
621/621.3/621.48
621/651.8
Ouvrages de la bibliothèque en indexation 621.47
Affiner la rechercheAssessment of load extrapolation methods for wind turbines / Henrik Stensgaard Toft in Transactions of the ASME. Journal of solar energy engineering, Vol. 133 N° 2 (Mai 2011)
[article]
in Transactions of the ASME. Journal of solar energy engineering > Vol. 133 N° 2 (Mai 2011) . - 08 p.
Titre : Assessment of load extrapolation methods for wind turbines Type de document : texte imprimé Auteurs : Henrik Stensgaard Toft, Auteur ; John Dalsgaard Sørensen, Auteur ; Dick Veldkamp, Auteur Année de publication : 2012 Article en page(s) : 08 p. Note générale : Solar energy Langues : Anglais (eng) Mots-clés : Extrapolation Gaussian processes Load (electric) Wind turbines Index. décimale : 621.47 Résumé : In the present paper, methods for statistical load extrapolation of wind-turbine response are studied using a stationary Gaussian process model, which has approximately the same spectral properties as the response for the out-of-plane bending moment of a wind-turbine blade. For a Gaussian process, an approximate analytical solution for the distribution of the peaks is given by Rice. In the present paper, three different methods for statistical load extrapolation are compared with the analytical solution for one mean wind speed. The methods considered are global maxima, block maxima, and the peak over threshold method with two different threshold values. The comparisons show that the goodness of fit for the local distribution has a significant influence on the results, but the peak over threshold method with a threshold value on the mean plus 1.4 standard deviations generally gives the best results. By considering Gaussian processes for 12 mean wind speeds, the “fitting before aggregation” and “aggregation before fitting” approaches are studied. The results show that the fitting before aggregation approach gives the best results. DEWEY : 621.47 ISSN : 0199-6231 En ligne : http://asmedl.org/getabs/servlet/GetabsServlet?prog=normal&id=JSEEDO000133000002 [...] [article] Assessment of load extrapolation methods for wind turbines [texte imprimé] / Henrik Stensgaard Toft, Auteur ; John Dalsgaard Sørensen, Auteur ; Dick Veldkamp, Auteur . - 2012 . - 08 p.
Solar energy
Langues : Anglais (eng)
in Transactions of the ASME. Journal of solar energy engineering > Vol. 133 N° 2 (Mai 2011) . - 08 p.
Mots-clés : Extrapolation Gaussian processes Load (electric) Wind turbines Index. décimale : 621.47 Résumé : In the present paper, methods for statistical load extrapolation of wind-turbine response are studied using a stationary Gaussian process model, which has approximately the same spectral properties as the response for the out-of-plane bending moment of a wind-turbine blade. For a Gaussian process, an approximate analytical solution for the distribution of the peaks is given by Rice. In the present paper, three different methods for statistical load extrapolation are compared with the analytical solution for one mean wind speed. The methods considered are global maxima, block maxima, and the peak over threshold method with two different threshold values. The comparisons show that the goodness of fit for the local distribution has a significant influence on the results, but the peak over threshold method with a threshold value on the mean plus 1.4 standard deviations generally gives the best results. By considering Gaussian processes for 12 mean wind speeds, the “fitting before aggregation” and “aggregation before fitting” approaches are studied. The results show that the fitting before aggregation approach gives the best results. DEWEY : 621.47 ISSN : 0199-6231 En ligne : http://asmedl.org/getabs/servlet/GetabsServlet?prog=normal&id=JSEEDO000133000002 [...] Assessment of solar power tower driven ultrasupercritical steam cycles applying tubular central receivers with varied heat transfer media / Csaba Singer in Transactions of the ASME. Journal of solar energy engineering, Vol. 132 N° 4 (Novembre 2010)
[article]
in Transactions of the ASME. Journal of solar energy engineering > Vol. 132 N° 4 (Novembre 2010) . - pp. [041010/1-12]
Titre : Assessment of solar power tower driven ultrasupercritical steam cycles applying tubular central receivers with varied heat transfer media Type de document : texte imprimé Auteurs : Csaba Singer, Auteur ; Reiner Buck, Auteur ; Robert Pitz-Paal, Auteur Année de publication : 2011 Article en page(s) : pp. [041010/1-12] Note générale : Energie Solaire Langues : Anglais (eng) Mots-clés : Cost reduction Solar power stations steam power stations Index. décimale : 621.47 Résumé : For clean and efficient electric power generation, the combination of solar power towers (SPTs) with ultrasupercritical steam cycle power plants could be the next development step. The methodology of the European concentrated solar thermal roadmap study was used to predict the annual performance and the cost reduction potential of this option applying tubular receivers with various appropriate high temperature heat transfer media (HTM). For the assessment, an analytical model of the heat transfer in a parametric 360 deg cylindrical and tubular central receiver was developed to examine the receiver's efficiency characteristics. The receiver's efficiency characteristics, which are based on different irradiation levels relative to the receiver's design point, are, then, used to interpolate the receiver's thermal efficiency in an hourly based annual calculation of one typical year that is defined by hourly based real measurements of the direct normal irradiance and the ambient temperature. Applying appropriate cost assumptions from literature, the levelized electricity costs (LEC) were estimated for each considered SPT concept and compared with the reference case, which is a scale-up of the state of the art molten salt concept. The power level of all compared concepts and the reference case is 50 MWel. The sensitivity of the specific cost assumptions for the LEC was evaluated for each concept variation. No detailed evaluation was done for the thermal storage but comparable costs were assumed for all cases. The results indicate a significant cost reduction potential of up to 15% LEC reduction in the liquid metal HTM processes. Due to annual performance based parametric studies of the number of receiver panels and storage capacity, the results also indicate the optimal values of these parameters concerning minimal LEC.
DEWEY : 621.47 ISSN : 0199-6231 En ligne : http://asmedl.aip.org/getabs/servlet/GetabsServlet?prog=normal&id=JSEEDO00013200 [...] [article] Assessment of solar power tower driven ultrasupercritical steam cycles applying tubular central receivers with varied heat transfer media [texte imprimé] / Csaba Singer, Auteur ; Reiner Buck, Auteur ; Robert Pitz-Paal, Auteur . - 2011 . - pp. [041010/1-12].
Energie Solaire
Langues : Anglais (eng)
in Transactions of the ASME. Journal of solar energy engineering > Vol. 132 N° 4 (Novembre 2010) . - pp. [041010/1-12]
Mots-clés : Cost reduction Solar power stations steam power stations Index. décimale : 621.47 Résumé : For clean and efficient electric power generation, the combination of solar power towers (SPTs) with ultrasupercritical steam cycle power plants could be the next development step. The methodology of the European concentrated solar thermal roadmap study was used to predict the annual performance and the cost reduction potential of this option applying tubular receivers with various appropriate high temperature heat transfer media (HTM). For the assessment, an analytical model of the heat transfer in a parametric 360 deg cylindrical and tubular central receiver was developed to examine the receiver's efficiency characteristics. The receiver's efficiency characteristics, which are based on different irradiation levels relative to the receiver's design point, are, then, used to interpolate the receiver's thermal efficiency in an hourly based annual calculation of one typical year that is defined by hourly based real measurements of the direct normal irradiance and the ambient temperature. Applying appropriate cost assumptions from literature, the levelized electricity costs (LEC) were estimated for each considered SPT concept and compared with the reference case, which is a scale-up of the state of the art molten salt concept. The power level of all compared concepts and the reference case is 50 MWel. The sensitivity of the specific cost assumptions for the LEC was evaluated for each concept variation. No detailed evaluation was done for the thermal storage but comparable costs were assumed for all cases. The results indicate a significant cost reduction potential of up to 15% LEC reduction in the liquid metal HTM processes. Due to annual performance based parametric studies of the number of receiver panels and storage capacity, the results also indicate the optimal values of these parameters concerning minimal LEC.
DEWEY : 621.47 ISSN : 0199-6231 En ligne : http://asmedl.aip.org/getabs/servlet/GetabsServlet?prog=normal&id=JSEEDO00013200 [...] Calibration and validation of the dynamic wake meandering model for implementation in an aeroelastic code / H. Aa. Madsen in Transactions of the ASME. Journal of solar energy engineering, Vol. 132 N° 4 (Novembre 2010)
[article]
in Transactions of the ASME. Journal of solar energy engineering > Vol. 132 N° 4 (Novembre 2010) . - pp. [041014/1-14]
Titre : Calibration and validation of the dynamic wake meandering model for implementation in an aeroelastic code Type de document : texte imprimé Auteurs : H. Aa. Madsen, Auteur ; G. C. Larsen, Auteur ; T. J. Larsen, Auteur Année de publication : 2011 Article en page(s) : pp. [041014/1-14] Note générale : Energie Solaire Langues : Anglais (eng) Mots-clés : Actuators Calibration Discs (structures) Elasticity Turbulence Vortices Wakes Wind power plants Wind turbines Index. décimale : 621.47 Résumé : As the major part of new wind turbines are installed in clusters or wind farms, there is a strong need for reliable and accurate tools for predicting the increased loadings due to wake operation and the associated reduced power production. The dynamic wake meandering (DWM) model has been developed on this background, and the basic physical mechanisms in the wake—i.e., the velocity deficit, the meandering of the deficit, and the added turbulence—are modeled as simply as possible in order to make fast computations. In the present paper, the DWM model is presented in a version suitable for full integration in an aeroelastic model. Calibration and validation of the different parts of the model is carried out by comparisons with actuator disk and actuator line (ACL) computations as well as with inflow measurements on a full-scale 2 MW turbine. It is shown that the load generating part of the increased turbulence in the wake is due almost exclusively to meandering of the velocity deficit, which causes “apparent” turbulence when measuring the flow in a fixed point in the wake. Added turbulence, originating mainly from breakdown of tip vortices and from the shear of the velocity deficit, has only a minor contribution to the total turbulence and with a small length scale in the range of 10–25% of the ambient turbulence length scale. Comparisons of the calibrated DWM model with ACL results for different downstream positions and ambient turbulence levels show good correlation for both wake deficits and turbulence levels. Finally, added turbulence characteristics are compared with correlation results from literature.
DEWEY : 621.47 ISSN : 0199-6231 En ligne : http://asmedl.aip.org/getabs/servlet/GetabsServlet?prog=normal&id=JSEEDO00013200 [...] [article] Calibration and validation of the dynamic wake meandering model for implementation in an aeroelastic code [texte imprimé] / H. Aa. Madsen, Auteur ; G. C. Larsen, Auteur ; T. J. Larsen, Auteur . - 2011 . - pp. [041014/1-14].
Energie Solaire
Langues : Anglais (eng)
in Transactions of the ASME. Journal of solar energy engineering > Vol. 132 N° 4 (Novembre 2010) . - pp. [041014/1-14]
Mots-clés : Actuators Calibration Discs (structures) Elasticity Turbulence Vortices Wakes Wind power plants Wind turbines Index. décimale : 621.47 Résumé : As the major part of new wind turbines are installed in clusters or wind farms, there is a strong need for reliable and accurate tools for predicting the increased loadings due to wake operation and the associated reduced power production. The dynamic wake meandering (DWM) model has been developed on this background, and the basic physical mechanisms in the wake—i.e., the velocity deficit, the meandering of the deficit, and the added turbulence—are modeled as simply as possible in order to make fast computations. In the present paper, the DWM model is presented in a version suitable for full integration in an aeroelastic model. Calibration and validation of the different parts of the model is carried out by comparisons with actuator disk and actuator line (ACL) computations as well as with inflow measurements on a full-scale 2 MW turbine. It is shown that the load generating part of the increased turbulence in the wake is due almost exclusively to meandering of the velocity deficit, which causes “apparent” turbulence when measuring the flow in a fixed point in the wake. Added turbulence, originating mainly from breakdown of tip vortices and from the shear of the velocity deficit, has only a minor contribution to the total turbulence and with a small length scale in the range of 10–25% of the ambient turbulence length scale. Comparisons of the calibrated DWM model with ACL results for different downstream positions and ambient turbulence levels show good correlation for both wake deficits and turbulence levels. Finally, added turbulence characteristics are compared with correlation results from literature.
DEWEY : 621.47 ISSN : 0199-6231 En ligne : http://asmedl.aip.org/getabs/servlet/GetabsServlet?prog=normal&id=JSEEDO00013200 [...] Carbon dioxide reforming of methane in directly irradiated solar reactor with porcupine absorber / Rachamim Rubin in Transactions of the ASME. Journal of solar energy engineering, Vol. 133 N° 2 (Mai 2011)
[article]
in Transactions of the ASME. Journal of solar energy engineering > Vol. 133 N° 2 (Mai 2011) . - 05 p.
Titre : Carbon dioxide reforming of methane in directly irradiated solar reactor with porcupine absorber Type de document : texte imprimé Auteurs : Rachamim Rubin, Auteur ; Jacob Karni, Auteur Année de publication : 2012 Article en page(s) : 05 p. Note générale : Solar energy Langues : Anglais (eng) Mots-clés : Carbon compounds Chemical energy conversion Poles and towers Ruthenium Solar absorber-convertors Index. décimale : 621.47 Résumé : A new solar volumetric reactor for CO2 reforming of CH4 was tested at the Solar Tower of the Weizmann Institute of Science. The reactor design was based on extensive previous experimental work with a volumetric receiver for heating air and simulation of volumetric reformer. The main parts of the reactor were a conical quartz window and a Porcupine absorber as the surface where chemical and thermal energy conversion took place. A specially developed ruthenium catalyst was used. The CO2 to CH4 ratio was about 1:1.2, and the total inlet flow rate was between 100 slpm and 235 slpm (slpm denotes standard liter per minute). The maximum absorber temperature was kept below 1450 K. The conversion of CH4 reached 85%. The total power absorbed was between 10.3 kW and 18.2 kW, of which the thermal power part was 2.3–4.5 kW and the stored chemical enrichment was 7.5–13.7 kW. The results indicate that this type of volumetric reactor can be used effectively for CO2 reforming of CH4, and further work aimed at improving the total efficiency of the system is in progress. DEWEY : 621.47 ISSN : 0199-6231 En ligne : http://asmedl.org/getabs/servlet/GetabsServlet?prog=normal&id=JSEEDO000133000002 [...] [article] Carbon dioxide reforming of methane in directly irradiated solar reactor with porcupine absorber [texte imprimé] / Rachamim Rubin, Auteur ; Jacob Karni, Auteur . - 2012 . - 05 p.
Solar energy
Langues : Anglais (eng)
in Transactions of the ASME. Journal of solar energy engineering > Vol. 133 N° 2 (Mai 2011) . - 05 p.
Mots-clés : Carbon compounds Chemical energy conversion Poles and towers Ruthenium Solar absorber-convertors Index. décimale : 621.47 Résumé : A new solar volumetric reactor for CO2 reforming of CH4 was tested at the Solar Tower of the Weizmann Institute of Science. The reactor design was based on extensive previous experimental work with a volumetric receiver for heating air and simulation of volumetric reformer. The main parts of the reactor were a conical quartz window and a Porcupine absorber as the surface where chemical and thermal energy conversion took place. A specially developed ruthenium catalyst was used. The CO2 to CH4 ratio was about 1:1.2, and the total inlet flow rate was between 100 slpm and 235 slpm (slpm denotes standard liter per minute). The maximum absorber temperature was kept below 1450 K. The conversion of CH4 reached 85%. The total power absorbed was between 10.3 kW and 18.2 kW, of which the thermal power part was 2.3–4.5 kW and the stored chemical enrichment was 7.5–13.7 kW. The results indicate that this type of volumetric reactor can be used effectively for CO2 reforming of CH4, and further work aimed at improving the total efficiency of the system is in progress. DEWEY : 621.47 ISSN : 0199-6231 En ligne : http://asmedl.org/getabs/servlet/GetabsServlet?prog=normal&id=JSEEDO000133000002 [...] Characteristics of global solar radiation monitor utilizing solar cells / A. Ibrahim in Transactions of the ASME. Journal of solar energy engineering, Vol. 133 N° 1 (Fevrier 2011)
[article]
in Transactions of the ASME. Journal of solar energy engineering > Vol. 133 N° 1 (Fevrier 2011) . - 04 p.
Titre : Characteristics of global solar radiation monitor utilizing solar cells Type de document : texte imprimé Auteurs : A. Ibrahim, Auteur ; M. R. I. Ramadan, Auteur Année de publication : 2012 Article en page(s) : 04 p. Note générale : Solar energy Langues : Anglais (eng) Mots-clés : Digital multimeters Solar cells Solar radiation Index. décimale : 621.47 Résumé : This brief note examines the characteristics of solar cells from the standpoint of developing a global solar radiation monitor. The study is performed using a simplified photovoltaic test monitor manufactured, a single crystal p-type czochraliski (CZ) silicon solar cell of the construction n+pp++ passivated emitter solar cell coupled to a fluke 73 digital multimeter. The short circuit current density (Jsc) is examined during a complete test day from 8:40 AM to 7:40 PM. Subsequently, the test monitor is used for checking the accuracy of transfer operations of solar radiation. The results obtained by the test monitor utilizing solar cells are good due to: (a) it is simple in construction, (b) it exhibits a good response to all solar radiation variations, and (c) it works without an electric power supply. DEWEY : 621.47 ISSN : 0199-6231 En ligne : http://asmedl.org/getabs/servlet/GetabsServlet?prog=normal&id=JSEEDO000134000001 [...] [article] Characteristics of global solar radiation monitor utilizing solar cells [texte imprimé] / A. Ibrahim, Auteur ; M. R. I. Ramadan, Auteur . - 2012 . - 04 p.
Solar energy
Langues : Anglais (eng)
in Transactions of the ASME. Journal of solar energy engineering > Vol. 133 N° 1 (Fevrier 2011) . - 04 p.
Mots-clés : Digital multimeters Solar cells Solar radiation Index. décimale : 621.47 Résumé : This brief note examines the characteristics of solar cells from the standpoint of developing a global solar radiation monitor. The study is performed using a simplified photovoltaic test monitor manufactured, a single crystal p-type czochraliski (CZ) silicon solar cell of the construction n+pp++ passivated emitter solar cell coupled to a fluke 73 digital multimeter. The short circuit current density (Jsc) is examined during a complete test day from 8:40 AM to 7:40 PM. Subsequently, the test monitor is used for checking the accuracy of transfer operations of solar radiation. The results obtained by the test monitor utilizing solar cells are good due to: (a) it is simple in construction, (b) it exhibits a good response to all solar radiation variations, and (c) it works without an electric power supply. DEWEY : 621.47 ISSN : 0199-6231 En ligne : http://asmedl.org/getabs/servlet/GetabsServlet?prog=normal&id=JSEEDO000134000001 [...] Coal coke gasification in a windowed solar chemical reactor for beam-down optics / Tatsuya Kodama in Transactions of the ASME. Journal of solar energy engineering, Vol. 132 N° 4 (Novembre 2010)
PermalinkComparative study in predicting the global solar radiation for Darwin, Australia / Wai Kean Yap in Transactions of the ASME. Journal of solar energy engineering, Vol. 134 N° 3 (Août 2012)
PermalinkA Comparison of long-term wind speed forecasting models / Petros P. Kritharas in Transactions of the ASME. Journal of solar energy engineering, Vol. 132 N° 4 (Novembre 2010)
PermalinkConcentrated solar energy to study high temperature materials for space and energy / Ludovic Charpentier in Transactions of the ASME. Journal of solar energy engineering, Vol. 133 N° 3 (N° Spécial) (Août 2011)
PermalinkConcentrated solar power harvesting using self-powered, wireless, thin-profile, lightweight solar tiles / Serhan M. Ardanuç in Transactions of the ASME. Journal of solar energy engineering, Vol. 133 N° 3 (N° Spécial) (Août 2011)
PermalinkConcentrating solar power development in China / Zhifeng Wang in Transactions of the ASME. Journal of solar energy engineering, Vol. 132 N° 2 (Mai 2010)
PermalinkConcentrating solar power in Europe, the middle east and north Africa / Robert Pitz-Paal in Transactions of the ASME. Journal of solar energy engineering, Vol. 134 N° 2 (Mai 2012)
PermalinkConceptual design of a 2× trough for use within salt and oil-based parabolic trough power plants / Gregory J. Kolb in Transactions of the ASME. Journal of solar energy engineering, Vol. 132 N° 4 (Novembre 2010)
PermalinkConsiderations for the design of solar-thermal chemical processes / Janna Martinek in Transactions of the ASME. Journal of solar energy engineering, Vol. 132 N° 3 (Août 2010)
PermalinkConvective heat transfer coefficients in a building-integrated photovoltaic/thermal system / Luis M. Candanedo in Transactions of the ASME. Journal of solar energy engineering, Vol. 133 N° 2 (Mai 2011)
Permalink