Les Inscriptions à la Bibliothèque sont ouvertes en
ligne via le site: https://biblio.enp.edu.dz
Les Réinscriptions se font à :
• La Bibliothèque Annexe pour les étudiants en
2ème Année CPST
• La Bibliothèque Centrale pour les étudiants en Spécialités
A partir de cette page vous pouvez :
Retourner au premier écran avec les recherches... |
Détail de l'indexation
621.5 : Energie pneumatique. Machinerie et outils. Réfrigération
621 Ingénierie mécanique en général. Technologie nucléaire. Ingénierie électrique. Machinerie
621.01 Théorie de l'ingénierie mécanique. La mécanique comme base de l'ingénierie mécanique
621.039 Science nucléaire appliquée. Energie atomique et industrie atomique. Ingénierie nucléaire en général
621.042
621.2/621.5
621.22 Energie hydraulique. Force hydraulique. Machines hydrauliques
621.224 Turbines hydraulique. Force hydraulique. Machines hydrauliques
621.3 Ingénierie électrique
621.3.038 équipements électrique
621.3.049 Construction de circuit électrique
621.3/016
621.3/530
621.3/537
621.31 Production,approvisionnement et contrôle de l'électricité.Machines et appareils électriques.Mesure électrique.Magnétisme et électrostatique appliquées
621.311 Production et approvisionnement en énergie électrique. Usines génératrices. Systèmes, équipement et disposition d'approvisionnement en énergie électrique. Schémas d'électrification
621.311 TEC Production et approvisionnemnt en énergie électrique. Usines génératrices. Système, équipement et disposition d'approvisionnement en énergie électrique.Usines génératrices.systémes ,équipement en énergie électrique. Schémas d'électrification
621.311.1 Résaux d'approvisionnement du point de vue de la distribution d'énergie .Résaux et grilles régionaux.Districts d'approvisionnet.Sous-stations.Schémas d'électrification
621.311.24 Industrie de énergétique au départ de sources d'énergie naturelles
621.311.243 Industrie de l'énergie solaire. Collecteurs solaires (systèmes de miroirs, fours solaires). Piles photovoltaïques
621.311.25 Industrie de l'énergie nucléaire (atomique)
621.313 Machines électriques
621.313.13 Machines électriques. Moteurs
621.314.5 Transformation du courant alternatif en courant continu et inversement. Convertisseurs. Inverseurs
621.315 Transmission de l'énergie électrique. Distribution de l'énergie et lignes de télécommunication
621.315.5 Conducteurs et semi-conducteurs selon le matériau
621.315.6 Mtériaux isolants
621.315.61 Matériaux isolants. Matériaux diélectriques
621.317 Mesure électrique (appareils et instruments)
621.317.3 Mesure des grandeurs électriques
621.317.34 Mesure des caractéristiques de transmission des réseaux et des lignes
621.318 Magnétisme appliqué.Matériaux et appareils magnétiques. Bobines.Relais
621.318.1 Matériaux magnétiques en général
621.319.1 Ferro-électricité appliquée réseaux
621.319/001.64
621.32 Sources de lumiére électrique
621.34
621.34/551.4
621.34/621.38
621.34/624
621.34/624/621.38
621.34/624/660
621.355.2 Accumulateurs en plomb (acide-plomb) en générale
621.357 Electrochimie industrielle . Electrolyse . Electrodéposition
621.36 Thermoélectricité.Chauffage électrique production d'électricité par la chaleur.Générateur thermoélectriques
621.36/7/05
621.362 Production d'électricité par la chaleur. Générateurs thermoélectriques
621.37 Technique des ondes électriques, des ondes électromagnétiques, des oscillations et impulsions électriques
621.377 Dispositifs électriques de stockage de l'information (mémoires)
621.38 Dispositifs électroniques. Tubes à électrons. Photocellules. Accélérateurs de particules. Tubes à rayons X
621.38/621.381
621.38/629.13
621.381
621.381/001
621.381/001.6
621.382 Dispositifs électroniques utilisant les effets des corps solides. Dispositifs semi-conducteurs
621.385.833 Microscope électronique. Caméras de diffraction.
621.39 Télécommunication. Télégraphie. Téléphonie. Radiocommunication. Technologie et équipement vidéo. Télécontrôle
621.391 Notions générales sur l'ingénierie des communications électriques. Cybernétique. Théorie de l'information, théorie des signaux (en connexion avec la technique des télécommunications électriques)
621.391.82 Perturbations.Interférence.Statique
621.391.837 Qualité de l'image due aux transducteurs de transmission et de réception. Résolution de l'image. Fantômes. Distorsion géométrique. Brillance. Contraste. Effets dynamiques. Modèle d'interférence...
621.396 Appareils et méthodes de radio-communication(radio).
621.396.67 Antennes. Antennes radio. Système de mise en terre
621.396.96 Radar ( (radiolocalisation)
621.397 Technologie vidéo. Ingénierie de la télévision. Enregistrement vidéo, transmission et reproduction. Equipements et réseau vidéo
621.397.13 Télévision
621.4 Moteurs thermiques
621.43 moteurs à combustion interne. Moteurs à explosions
621.436.1 Moteurs Diesel dans le sens étroit du mot
621.438 Turbines de combustion. Turbines à gaz. Turbines à huile
621.45 Moteurs à réaction . Réacteurs
621.47
621.48
621.51 Compression et impulsion de l'air et autres gaz. Compresseurs. Ventilateur à haute pression
621.52 Réfaction de l'air et des autres gaz. Pompes à air. Exhausteur. Raréfacteur. Pompes à vide
621.56 Réfrigération en général. Production de basse température
621.64 Installation de stockage et de distribution des fluides. Conteneurs, conduits, tuyaux.
621.67 Pompes centrifuges et turbo-pompes
621.7 Technologie mécanique en général. Procédés. Outillages. Machines. Equipement
621.74 Travail de fonderie. Disposition et équipement de la fonderie. Moulage et fusion
621.762 Métallurgie des poudres
621.791 Soudure et techniques analogues
621.791/.792 Assemblage des matériaux
621.793/795 Traitement de finition des surfaces
621.8
621.861 Poulies et palans. Appareil de levage. Palans
621.865.8 Manipulateurs, robots industriels
621.89 Lubrification. Lubrifiants. Dispositifs de lubrification
621.891 Généralités. Frottement dans les machines. Propriétés des lubrifiants
621.9
621/336
621/530
621/621.3/621.48
621/651.8
621.01 Théorie de l'ingénierie mécanique. La mécanique comme base de l'ingénierie mécanique
621.039 Science nucléaire appliquée. Energie atomique et industrie atomique. Ingénierie nucléaire en général
621.042
621.2/621.5
621.22 Energie hydraulique. Force hydraulique. Machines hydrauliques
621.224 Turbines hydraulique. Force hydraulique. Machines hydrauliques
621.3 Ingénierie électrique
621.3.038 équipements électrique
621.3.049 Construction de circuit électrique
621.3/016
621.3/530
621.3/537
621.31 Production,approvisionnement et contrôle de l'électricité.Machines et appareils électriques.Mesure électrique.Magnétisme et électrostatique appliquées
621.311 Production et approvisionnement en énergie électrique. Usines génératrices. Systèmes, équipement et disposition d'approvisionnement en énergie électrique. Schémas d'électrification
621.311 TEC Production et approvisionnemnt en énergie électrique. Usines génératrices. Système, équipement et disposition d'approvisionnement en énergie électrique.Usines génératrices.systémes ,équipement en énergie électrique. Schémas d'électrification
621.311.1 Résaux d'approvisionnement du point de vue de la distribution d'énergie .Résaux et grilles régionaux.Districts d'approvisionnet.Sous-stations.Schémas d'électrification
621.311.24 Industrie de énergétique au départ de sources d'énergie naturelles
621.311.243 Industrie de l'énergie solaire. Collecteurs solaires (systèmes de miroirs, fours solaires). Piles photovoltaïques
621.311.25 Industrie de l'énergie nucléaire (atomique)
621.313 Machines électriques
621.313.13 Machines électriques. Moteurs
621.314.5 Transformation du courant alternatif en courant continu et inversement. Convertisseurs. Inverseurs
621.315 Transmission de l'énergie électrique. Distribution de l'énergie et lignes de télécommunication
621.315.5 Conducteurs et semi-conducteurs selon le matériau
621.315.6 Mtériaux isolants
621.315.61 Matériaux isolants. Matériaux diélectriques
621.317 Mesure électrique (appareils et instruments)
621.317.3 Mesure des grandeurs électriques
621.317.34 Mesure des caractéristiques de transmission des réseaux et des lignes
621.318 Magnétisme appliqué.Matériaux et appareils magnétiques. Bobines.Relais
621.318.1 Matériaux magnétiques en général
621.319.1 Ferro-électricité appliquée réseaux
621.319/001.64
621.32 Sources de lumiére électrique
621.34
621.34/551.4
621.34/621.38
621.34/624
621.34/624/621.38
621.34/624/660
621.355.2 Accumulateurs en plomb (acide-plomb) en générale
621.357 Electrochimie industrielle . Electrolyse . Electrodéposition
621.36 Thermoélectricité.Chauffage électrique production d'électricité par la chaleur.Générateur thermoélectriques
621.36/7/05
621.362 Production d'électricité par la chaleur. Générateurs thermoélectriques
621.37 Technique des ondes électriques, des ondes électromagnétiques, des oscillations et impulsions électriques
621.377 Dispositifs électriques de stockage de l'information (mémoires)
621.38 Dispositifs électroniques. Tubes à électrons. Photocellules. Accélérateurs de particules. Tubes à rayons X
621.38/621.381
621.38/629.13
621.381
621.381/001
621.381/001.6
621.382 Dispositifs électroniques utilisant les effets des corps solides. Dispositifs semi-conducteurs
621.385.833 Microscope électronique. Caméras de diffraction.
621.39 Télécommunication. Télégraphie. Téléphonie. Radiocommunication. Technologie et équipement vidéo. Télécontrôle
621.391 Notions générales sur l'ingénierie des communications électriques. Cybernétique. Théorie de l'information, théorie des signaux (en connexion avec la technique des télécommunications électriques)
621.391.82 Perturbations.Interférence.Statique
621.391.837 Qualité de l'image due aux transducteurs de transmission et de réception. Résolution de l'image. Fantômes. Distorsion géométrique. Brillance. Contraste. Effets dynamiques. Modèle d'interférence...
621.396 Appareils et méthodes de radio-communication(radio).
621.396.67 Antennes. Antennes radio. Système de mise en terre
621.396.96 Radar ( (radiolocalisation)
621.397 Technologie vidéo. Ingénierie de la télévision. Enregistrement vidéo, transmission et reproduction. Equipements et réseau vidéo
621.397.13 Télévision
621.4 Moteurs thermiques
621.43 moteurs à combustion interne. Moteurs à explosions
621.436.1 Moteurs Diesel dans le sens étroit du mot
621.438 Turbines de combustion. Turbines à gaz. Turbines à huile
621.45 Moteurs à réaction . Réacteurs
621.47
621.48
621.51 Compression et impulsion de l'air et autres gaz. Compresseurs. Ventilateur à haute pression
621.52 Réfaction de l'air et des autres gaz. Pompes à air. Exhausteur. Raréfacteur. Pompes à vide
621.56 Réfrigération en général. Production de basse température
621.64 Installation de stockage et de distribution des fluides. Conteneurs, conduits, tuyaux.
621.67 Pompes centrifuges et turbo-pompes
621.7 Technologie mécanique en général. Procédés. Outillages. Machines. Equipement
621.74 Travail de fonderie. Disposition et équipement de la fonderie. Moulage et fusion
621.762 Métallurgie des poudres
621.791 Soudure et techniques analogues
621.791/.792 Assemblage des matériaux
621.793/795 Traitement de finition des surfaces
621.8
621.861 Poulies et palans. Appareil de levage. Palans
621.865.8 Manipulateurs, robots industriels
621.89 Lubrification. Lubrifiants. Dispositifs de lubrification
621.891 Généralités. Frottement dans les machines. Propriétés des lubrifiants
621.9
621/336
621/530
621/621.3/621.48
621/651.8
Ouvrages de la bibliothèque en indexation 621.5
Affiner la rechercheAn approach for modeling material grain structure in investigations of hertzian subsurface stresses and rolling contact fatigue / Nick Weinzapfel in Transactions of the ASME . Journal of tribology, Vol. 132 N° 4 (Octobre 2010)
[article]
in Transactions of the ASME . Journal of tribology > Vol. 132 N° 4 (Octobre 2010) . - 12 p.
Titre : An approach for modeling material grain structure in investigations of hertzian subsurface stresses and rolling contact fatigue Type de document : texte imprimé Auteurs : Nick Weinzapfel, Auteur ; Farshid Sadeghi, Auteur ; Vasilios Bakolas, Auteur Année de publication : 2011 Article en page(s) : 12 p. Note générale : Tribology Langues : Anglais (eng) Mots-clés : Computational geometry Crystal microstructure Fatigue Finite element analysis Internal stresses Mechanical contact Rolling bearings Rolling friction Index. décimale : 621.5 Energie pneumatique. Machinerie et outils. Réfrigération Résumé : The continuum theory of elasticity and/or homogeneously discretized finite element models have been commonly used to investigate and analyze subsurface stresses in Hertzian contacts. These approaches, however, do not effectively capture the influence of the random microstructure topology on subsurface stress distributions in Hertzian contacts. In this paper, a finite element model for analyzing subsurface stresses in an elastic half-space subjected to a general Hertzian contact load with explicit consideration of the material microstructure topology is presented. The random internal geometry of polycrystalline microstructures is modeled using a 3D Voronoi tessellation, where each Voronoi cell represents a distinct material grain. The grains are then meshed using finite elements, and an algorithm was developed to eliminate poorly shaped elements resulting from “near degeneracy” in the Voronoi tessellations. Hertzian point and line contacts loads are applied as distributed surface loads, and the model's response is evaluated with commercial finite element software ABAQUS. Internal stress results obtained from the current model compare well with analytical solutions from theory of elasticity. The influence of the internal microstructure topology on the subsurface stresses is demonstrated by analyzing the model's response to an over rolling element using a critical plane approach. DEWEY : 621.5 ISSN : 0742-4787 En ligne : http://scitation.aip.org/getabs/servlet/GetabsServlet?prog=normal&id=JOTRE900013 [...] [article] An approach for modeling material grain structure in investigations of hertzian subsurface stresses and rolling contact fatigue [texte imprimé] / Nick Weinzapfel, Auteur ; Farshid Sadeghi, Auteur ; Vasilios Bakolas, Auteur . - 2011 . - 12 p.
Tribology
Langues : Anglais (eng)
in Transactions of the ASME . Journal of tribology > Vol. 132 N° 4 (Octobre 2010) . - 12 p.
Mots-clés : Computational geometry Crystal microstructure Fatigue Finite element analysis Internal stresses Mechanical contact Rolling bearings Rolling friction Index. décimale : 621.5 Energie pneumatique. Machinerie et outils. Réfrigération Résumé : The continuum theory of elasticity and/or homogeneously discretized finite element models have been commonly used to investigate and analyze subsurface stresses in Hertzian contacts. These approaches, however, do not effectively capture the influence of the random microstructure topology on subsurface stress distributions in Hertzian contacts. In this paper, a finite element model for analyzing subsurface stresses in an elastic half-space subjected to a general Hertzian contact load with explicit consideration of the material microstructure topology is presented. The random internal geometry of polycrystalline microstructures is modeled using a 3D Voronoi tessellation, where each Voronoi cell represents a distinct material grain. The grains are then meshed using finite elements, and an algorithm was developed to eliminate poorly shaped elements resulting from “near degeneracy” in the Voronoi tessellations. Hertzian point and line contacts loads are applied as distributed surface loads, and the model's response is evaluated with commercial finite element software ABAQUS. Internal stress results obtained from the current model compare well with analytical solutions from theory of elasticity. The influence of the internal microstructure topology on the subsurface stresses is demonstrated by analyzing the model's response to an over rolling element using a critical plane approach. DEWEY : 621.5 ISSN : 0742-4787 En ligne : http://scitation.aip.org/getabs/servlet/GetabsServlet?prog=normal&id=JOTRE900013 [...] An efficient 3D model of heterogeneous materials for elastic contact applications using multigrid methods / Hugo Boffy in Transactions of the ASME . Journal of tribology, Vol. 134 N° 2 (Avril 2012)
[article]
in Transactions of the ASME . Journal of tribology > Vol. 134 N° 2 (Avril 2012) . - 08 p.
Titre : An efficient 3D model of heterogeneous materials for elastic contact applications using multigrid methods Type de document : texte imprimé Auteurs : Hugo Boffy, Auteur ; Marie-Christine Baietto, Auteur ; Philippe Sainsot, Auteur Année de publication : 2012 Article en page(s) : 08 p. Note générale : tribology Langues : Anglais (eng) Mots-clés : 3D graded coating/substrate model; homogeneous material; graded material; three-dimensional examples Index. décimale : 621.5 Energie pneumatique. Machinerie et outils. Réfrigération Résumé : A 3D graded coating/substrate model based on multigrid techniques within a finite difference frame work is presented. Localized refinement is implemented to optimize memory requirement and computing time. Validation of the solver is performed through a comparison with analytical results for (i) a homogeneous material and (ii) a graded material. The algorithm performance is analyzed through a parametric study describing the influence of layer thickness (0.01 < t/a < 10) and mechanical properties (0.005 < Ec/Es < 10) of the coating on the contact parameters (Ph, a). Three-dimensional examples are then presented to illustrate the efficiency and the large range of possibilities of the model. The influence of different gradations of Young's modulus, constant, linear and sinusoidal, through the coating thickness on the maximum tensile stress is analyzed, showing that the sinusoidal gradation best accommodates the property mismatch of two successive layers. A final case is designed to show that full 3D spatial property variations can be accounted for. Two spherical inclusions of different size made from elastic solids with Young's modulus and Poisson's ratio are embedded within an elastically mismatched finite domain and the stress field is computed. DEWEY : 621.5 ISSN : 0742-4787 En ligne : http://asmedl.org/getabs/servlet/GetabsServlet?prog=normal&id=JOTRE9000134000002 [...] [article] An efficient 3D model of heterogeneous materials for elastic contact applications using multigrid methods [texte imprimé] / Hugo Boffy, Auteur ; Marie-Christine Baietto, Auteur ; Philippe Sainsot, Auteur . - 2012 . - 08 p.
tribology
Langues : Anglais (eng)
in Transactions of the ASME . Journal of tribology > Vol. 134 N° 2 (Avril 2012) . - 08 p.
Mots-clés : 3D graded coating/substrate model; homogeneous material; graded material; three-dimensional examples Index. décimale : 621.5 Energie pneumatique. Machinerie et outils. Réfrigération Résumé : A 3D graded coating/substrate model based on multigrid techniques within a finite difference frame work is presented. Localized refinement is implemented to optimize memory requirement and computing time. Validation of the solver is performed through a comparison with analytical results for (i) a homogeneous material and (ii) a graded material. The algorithm performance is analyzed through a parametric study describing the influence of layer thickness (0.01 < t/a < 10) and mechanical properties (0.005 < Ec/Es < 10) of the coating on the contact parameters (Ph, a). Three-dimensional examples are then presented to illustrate the efficiency and the large range of possibilities of the model. The influence of different gradations of Young's modulus, constant, linear and sinusoidal, through the coating thickness on the maximum tensile stress is analyzed, showing that the sinusoidal gradation best accommodates the property mismatch of two successive layers. A final case is designed to show that full 3D spatial property variations can be accounted for. Two spherical inclusions of different size made from elastic solids with Young's modulus and Poisson's ratio are embedded within an elastically mismatched finite domain and the stress field is computed. DEWEY : 621.5 ISSN : 0742-4787 En ligne : http://asmedl.org/getabs/servlet/GetabsServlet?prog=normal&id=JOTRE9000134000002 [...] An efficient elastic displacement analysis procedure for simulating transient conformal-contact elastohydrodynamic lubrication systems / Shangwu Xiong in Transactions of the ASME . Journal of tribology, Vol. 132 N° 2 (Avril 2010)
[article]
in Transactions of the ASME . Journal of tribology > Vol. 132 N° 2 (Avril 2010) . - 09 p.
Titre : An efficient elastic displacement analysis procedure for simulating transient conformal-contact elastohydrodynamic lubrication systems Type de document : texte imprimé Auteurs : Shangwu Xiong, Auteur ; Chih Lin, Auteur ; Yansong Wang, Auteur Année de publication : 2011 Article en page(s) : 09 p. Note générale : Tribology Langues : Anglais (eng) Mots-clés : Elasticity Finite element analysis Hydrodynamics Lubrication Machine bearings Mechanical contact Surface roughness Surface topography Index. décimale : 621.5 Energie pneumatique. Machinerie et outils. Réfrigération Résumé : of surfaces in the simulation of transient and steady-state elastohydrodynamic lubrication of conformal-contact systems. The values of the compliance operator represent the elastic responses of all nodes when only one node is under a unit load. The accuracy of compliance operator values, computational cost, and storage size are important issues. Our study of steady-state conformal-contact elastohydrodynamic lubrication analyses suggests a method of selective-fine-mesh with selective-storage, as well as a special technique of the combined selective-fine-mesh with selective-storage mapping. These two techniques enable an efficient elasticity procedure for the simulation of steady-state and transient conformal-contact elastohydrodynamic lubrication systems by means of the finite element method. DEWEY : 621.5 ISSN : 0742-4787 En ligne : http://scitation.aip.org/getabs/servlet/GetabsServlet?prog=normal&id=JOTRE900013 [...] [article] An efficient elastic displacement analysis procedure for simulating transient conformal-contact elastohydrodynamic lubrication systems [texte imprimé] / Shangwu Xiong, Auteur ; Chih Lin, Auteur ; Yansong Wang, Auteur . - 2011 . - 09 p.
Tribology
Langues : Anglais (eng)
in Transactions of the ASME . Journal of tribology > Vol. 132 N° 2 (Avril 2010) . - 09 p.
Mots-clés : Elasticity Finite element analysis Hydrodynamics Lubrication Machine bearings Mechanical contact Surface roughness Surface topography Index. décimale : 621.5 Energie pneumatique. Machinerie et outils. Réfrigération Résumé : of surfaces in the simulation of transient and steady-state elastohydrodynamic lubrication of conformal-contact systems. The values of the compliance operator represent the elastic responses of all nodes when only one node is under a unit load. The accuracy of compliance operator values, computational cost, and storage size are important issues. Our study of steady-state conformal-contact elastohydrodynamic lubrication analyses suggests a method of selective-fine-mesh with selective-storage, as well as a special technique of the combined selective-fine-mesh with selective-storage mapping. These two techniques enable an efficient elasticity procedure for the simulation of steady-state and transient conformal-contact elastohydrodynamic lubrication systems by means of the finite element method. DEWEY : 621.5 ISSN : 0742-4787 En ligne : http://scitation.aip.org/getabs/servlet/GetabsServlet?prog=normal&id=JOTRE900013 [...] An experimental and theoretical study of a CO2 ejector / Chen Guangming in International journal of refrigeration, Vol. 33 N° 5 (Août 2010)
[article]
in International journal of refrigeration > Vol. 33 N° 5 (Août 2010) . - pp. 915-921
Titre : An experimental and theoretical study of a CO2 ejector Titre original : Etude expérimentale et théorique sur un éjecteur au CO2 Type de document : texte imprimé Auteurs : Chen Guangming, Auteur ; Xu Xiaoxiao, Auteur ; Liu Shuang, Auteur Année de publication : 2010 Article en page(s) : pp. 915-921 Note générale : Génie Mécanique Langues : Anglais (eng) Mots-clés : Refrigeration system Ejector system Carbon dioxide Heat pump Domestic hot water Calculation Performance Index. décimale : 621.5 Energie pneumatique. Machinerie et outils. Réfrigération Résumé : In this paper we represent the performance of an ejector used in the CO2 heat pump water heater system by means of experimental and theoretical studies. This work accounts for the effects of primary flow pressure, entrained flow pressure and back pressure on the entrainment ratio in off-design conditions. The performance of the ejector is experimentally investigated in a CO2-ejector test rig. Using ejector characteristic-curve equations, we provide predictions in good agreement with the experimental data. Furthermore, the model predictions will be utilized as a design tool for optimizing the performance of next generation ejector. DEWEY : 621.5 ISSN : 0140-7007 En ligne : http://www.sciencedirect.com/science/article/pii/S0140700710000228 [article] An experimental and theoretical study of a CO2 ejector = Etude expérimentale et théorique sur un éjecteur au CO2 [texte imprimé] / Chen Guangming, Auteur ; Xu Xiaoxiao, Auteur ; Liu Shuang, Auteur . - 2010 . - pp. 915-921.
Génie Mécanique
Langues : Anglais (eng)
in International journal of refrigeration > Vol. 33 N° 5 (Août 2010) . - pp. 915-921
Mots-clés : Refrigeration system Ejector system Carbon dioxide Heat pump Domestic hot water Calculation Performance Index. décimale : 621.5 Energie pneumatique. Machinerie et outils. Réfrigération Résumé : In this paper we represent the performance of an ejector used in the CO2 heat pump water heater system by means of experimental and theoretical studies. This work accounts for the effects of primary flow pressure, entrained flow pressure and back pressure on the entrainment ratio in off-design conditions. The performance of the ejector is experimentally investigated in a CO2-ejector test rig. Using ejector characteristic-curve equations, we provide predictions in good agreement with the experimental data. Furthermore, the model predictions will be utilized as a design tool for optimizing the performance of next generation ejector. DEWEY : 621.5 ISSN : 0140-7007 En ligne : http://www.sciencedirect.com/science/article/pii/S0140700710000228 An experimental investigation of an ejector for validating numerical simulations / David Scott in International journal of refrigeration, Vol. 34 N° 7 (Novembre 2011)
[article]
in International journal of refrigeration > Vol. 34 N° 7 (Novembre 2011) . - pp. 1717-1723
Titre : An experimental investigation of an ejector for validating numerical simulations Titre original : Etude expérimentale et théorique sur un éjecteur destinée à valider des simulations numériques Type de document : texte imprimé Auteurs : David Scott, Auteur ; Aidoun, Zine, Auteur ; Ouzzane, Mohamed, Auteur Année de publication : 2011 Article en page(s) : pp. 1717-1723 Note générale : Génie Mécanique Langues : Anglais (eng) Mots-clés : Ejector Test rig Experimentation Simulation R245fa Index. décimale : 621.5 Energie pneumatique. Machinerie et outils. Réfrigération Résumé : Supersonic ejectors have been used in cooling/refrigeration applications since the early 1900s. Interest in supersonic ejectors has been rekindled by recent efforts to reduce energy consumption; ejector refrigeration systems can be powered by solar energy or by waste heat generated by another process. This paper describes an experimental test bench using R245fa that was assembled and operated at CanmetENERGY in Varennes. The results from this test bench provide a source of reference data that may be used to validate numerical models of ejectors that could be used in refrigeration applications. Limited results from two numerical models are presented for comparison; global results from a 1D model and results from a detailed CFD model that show the flow field inside the ejector. DEWEY : 621.5 ISSN : 0140-7007 En ligne : http://www.sciencedirect.com/science/article/pii/S0140700711001411 [article] An experimental investigation of an ejector for validating numerical simulations = Etude expérimentale et théorique sur un éjecteur destinée à valider des simulations numériques [texte imprimé] / David Scott, Auteur ; Aidoun, Zine, Auteur ; Ouzzane, Mohamed, Auteur . - 2011 . - pp. 1717-1723.
Génie Mécanique
Langues : Anglais (eng)
in International journal of refrigeration > Vol. 34 N° 7 (Novembre 2011) . - pp. 1717-1723
Mots-clés : Ejector Test rig Experimentation Simulation R245fa Index. décimale : 621.5 Energie pneumatique. Machinerie et outils. Réfrigération Résumé : Supersonic ejectors have been used in cooling/refrigeration applications since the early 1900s. Interest in supersonic ejectors has been rekindled by recent efforts to reduce energy consumption; ejector refrigeration systems can be powered by solar energy or by waste heat generated by another process. This paper describes an experimental test bench using R245fa that was assembled and operated at CanmetENERGY in Varennes. The results from this test bench provide a source of reference data that may be used to validate numerical models of ejectors that could be used in refrigeration applications. Limited results from two numerical models are presented for comparison; global results from a 1D model and results from a detailed CFD model that show the flow field inside the ejector. DEWEY : 621.5 ISSN : 0140-7007 En ligne : http://www.sciencedirect.com/science/article/pii/S0140700711001411 An experimental-numerical procedure for stuffing box packing characterization and leak tests / Mohammed Diany in Transactions of the ASME . Journal of tribology, Vol. 133 N° 1 (Janvier 2011)
PermalinkAn experimental study into the evaporation heat transfer and flow characteristics of R-134a refrigerant flowing through corrugated tubes / Suriyan Laohalertdecha in International journal of refrigeration, Vol. 34 N° 1 (Janvier 2011)
PermalinkAn experimental study of the correlation for predicting the frost height in applying the photoelectric technology / J. Xiao in International journal of refrigeration, Vol. 33 N° 5 (Août 2010)
PermalinkAn experimental study of the flow of R-407C in an adiabatic helical capillary tube / M.K. Mittal in International journal of refrigeration, Vol. 33 N° 4 (Juin 2010)
PermalinkAn experimental study on oil discharge ratio at inverter-driven high shell pressure scroll compressor using R410A/PVE / Pilhyun Yoon in International journal of refrigeration, Vol. 34 N° 1 (Janvier 2011)
PermalinkAn overview of the hardness differential required for abrasion / Giuseppe Pintaude in Transactions of the ASME . Journal of tribology, Vol. 132 N° 3 (Juillet 2010)
PermalinkAnalysis of resonant frequency of moving magnet linear compressor of stirling cryocooler / Ming Xia in International journal of refrigeration, Vol. 33 N° 4 (Juin 2010)
PermalinkAnalysis of shoe friction during sliding against floor material / Caitlin T. Moore in Transactions of the ASME . Journal of tribology, Vol. 134 N° 04 (Octobre 2012)
PermalinkAnalysis of single-grooved slider and journal bearing with partial slip surface / T. V. V. L. N. Rao in Transactions of the ASME . Journal of tribology, Vol. 132 N° 1 (Janvier 2010)
PermalinkAnalysis of transient contact response of a sub-10 nanometer air-bearing slider (pico glide head) using empirical mode decomposition / Gang Sheng in Transactions of the ASME . Journal of tribology, Vol. 133 N° 3 (Juillet 2011)
Permalink