| Titre : | Energy harvesting from vibration with alternate scavenging circuitry and tapered cantilever beam |
| Auteurs : | Mehraeen, Shahab, Auteur ; Jagannathan, S., Auteur ; Corzine, Keith A., Auteur |
| Type de document : | Article : texte imprimé |
| Dans : | IEEE transactions on industrial electronics (Vol. 57 N° 3, Mars 2010) |
| Article en page(s) : | pp. 820 - 830 |
| Note générale : | Génie électrique |
| Langues : | Anglais |
| Index. décimale : | 621.38 (Dispositifs électroniques. Tubes à électrons. Photocellules. Accélérateurs de particules. Tubes à rayons X) |
| Tags : | Cantilever beam Energy harvesting Piezoelectric |
| Résumé : | Piezoelectric transducers are increasingly being used to harvest energy from environmental vibrations in order to either power remote sensors or charge batteries that power the sensors. In this paper, a new voltage compensation scheme for high-voltage-based (> 100 V) energy harvesting is introduced, and its fundamental concepts, as well as the operation details, are elaborated. This scheme, when applied to the voltage inversion method [synchronized switch harvesting on inductor (SSHI)], provides an increase of over 14% in harvested power when compared to the parallel inversion method (parallel SSHI) alone and more than 50% in the case of series inversion method (series SSHI). Second, tapered cantilever beams were shown to be more effective in generating a uniform strain profile over rectangular and trapezoidal beams if they are precisely shaped, resulting in a significant increase in harvested power over available methods in the literature from laboratory experimental tests. In addition, a simplified method to design such a beam is introduced. Finally, a field test of the proposed tapered beam is conducted by using a dozer for earth-moving applications, and experimental results are discussed. |
| DEWEY : | 621.38 |
| ISSN : | 0278-0046 |
| En ligne : | http://ieeexplore.ieee.org/xpl/freeabs_all.jsp?arnumber=5345740 |
