[article]
| Titre : |
Zero-voltage- and zero-current-switching full-bridge converter with secondary resonance |
| Type de document : |
texte imprimé |
| Auteurs : |
Eung-Ho Kim, Auteur ; Kwon, Bong-Hwan, Auteur |
| Article en page(s) : |
pp. 1017 - 1025 |
| Note générale : |
Génie électrique |
| Langues : |
Anglais (eng) |
| Mots-clés : |
Phase shift Series resonant Zero-voltage and zero-current switching (ZVZCS) |
| Index. décimale : |
621.38 Dispositifs électroniques. Tubes à électrons. Photocellules. Accélérateurs de particules. Tubes à rayons X |
| Résumé : |
A zero-voltage- and zero-current-switching full-bridge (FB) converter with secondary resonance is presented and analyzed. The primary side of the converter is composed of FB insulated-gate bipolar transistors, which are driven by phase-shift control. The secondary side is composed of a resonant tank and a half-wave rectifier. Without an auxiliary circuit, zero-voltage switching (for leading-leg switches) and zero-current switching (for lagging-leg switches) are achieved in the entire operating range. To implement the converter without an additional inductor, the leakage inductance of the transformer is utilized as the resonant inductor. Due to its many advantages, including high efficiency, minimum number of devices, and low cost, this converter is attractive for high-voltage and high-power applications. The analysis and design considerations of the converter are presented. A prototype was implemented for an application requiring a 5-kW output power, an input-voltage range varying from 250 to 350 V, and a 350-V output voltage. The experimental results obtained from a prototype verify the analysis. The prototype's efficiency at full load is over 95.5%. |
| DEWEY : |
621.38 |
| ISSN : |
0278-0046 |
| En ligne : |
http://ieeexplore.ieee.org/xpl/freeabs_all.jsp?arnumber=5210156 |
in IEEE transactions on industrial electronics > Vol. 57 N° 3 (Mars 2010) . - pp. 1017 - 1025
[article] Zero-voltage- and zero-current-switching full-bridge converter with secondary resonance [texte imprimé] / Eung-Ho Kim, Auteur ; Kwon, Bong-Hwan, Auteur . - pp. 1017 - 1025. Génie électrique Langues : Anglais ( eng) in IEEE transactions on industrial electronics > Vol. 57 N° 3 (Mars 2010) . - pp. 1017 - 1025
| Mots-clés : |
Phase shift Series resonant Zero-voltage and zero-current switching (ZVZCS) |
| Index. décimale : |
621.38 Dispositifs électroniques. Tubes à électrons. Photocellules. Accélérateurs de particules. Tubes à rayons X |
| Résumé : |
A zero-voltage- and zero-current-switching full-bridge (FB) converter with secondary resonance is presented and analyzed. The primary side of the converter is composed of FB insulated-gate bipolar transistors, which are driven by phase-shift control. The secondary side is composed of a resonant tank and a half-wave rectifier. Without an auxiliary circuit, zero-voltage switching (for leading-leg switches) and zero-current switching (for lagging-leg switches) are achieved in the entire operating range. To implement the converter without an additional inductor, the leakage inductance of the transformer is utilized as the resonant inductor. Due to its many advantages, including high efficiency, minimum number of devices, and low cost, this converter is attractive for high-voltage and high-power applications. The analysis and design considerations of the converter are presented. A prototype was implemented for an application requiring a 5-kW output power, an input-voltage range varying from 250 to 350 V, and a 350-V output voltage. The experimental results obtained from a prototype verify the analysis. The prototype's efficiency at full load is over 95.5%. |
| DEWEY : |
621.38 |
| ISSN : |
0278-0046 |
| En ligne : |
http://ieeexplore.ieee.org/xpl/freeabs_all.jsp?arnumber=5210156 |
|
Zero-voltage- and zero-current-switching full-bridge converter with secondary resonance in IEEE transactions on industrial electronics, Vol. 57 N° 3 (Mars 2010)
