Documents disponibles écrits par cet auteur

Adsorption behavior of Li+ onto nano-lithium ion sieve from hybrid magnesium/lithium manganese oxide / Liyan Tian in Chemical engineering journal, Vol. 156 N° 1 (Janvier 2010) 

Public ISBD [article]  in Chemical engineering journal > Vol. 156 N° 1 (Janvier 2010) . - pp. 134-140 Titre : Adsorption behavior of Li+ onto nano-lithium ion sieve from hybrid magnesium/lithium manganese oxide Type de document : texte imprimé Auteurs : Liyan Tian, Auteur ; Wei Ma, Auteur ; Mei Han, Auteur Année de publication : 2010 Article en page(s) : pp. 134-140 Note générale : Génie Chimique Langues : Anglais (eng) Mots-clés : Adsorption  Lithium  Lithium  ion  sieve  Modeling  Kinetics Index. décimale : 660 Résumé : Magnesium (II) doped spinel lithium manganese oxide (LMS) was synthesized by soft chemical method and nanosized ion sieve manganese oxide (HMS) was prepared by extracting lithium and magnesium from LMS. The characteristics of HMS were studied by X-ray diffraction, scanning electron microscopy, transmission electron microscopy, surface areas and determination of pH at the point of zero charge. Experiments were performed to study the effects of pH, adsorbent dose, contact time and Li+ concentration. The competitive model was used to describe the competition between Li+–H+ and the applicability of different kinetic models was evaluated. The results showed that the pH at the point of zero charge of HMS was about 7.8. The recycle of HMS explained that it could be used as Li+ adsorbent with topotactical extraction of lithium. Under optimized batch conditions up to 99.2% Li+ could be recovered from solution within 24 h. The adsorption process followed the pseudo-second-order model and followed an intraparticle diffusion model at the beginning. DEWEY : 660 ISSN : 1385-8947 En ligne : http://www.sciencedirect.com/science?_ob=ArticleURL&_udi=B6TFJ-4XF840K-8&_user=6 [...] [article] Adsorption behavior of Li+ onto nano-lithium ion sieve from hybrid magnesium/lithium manganese oxide [texte imprimé] / Liyan Tian, Auteur ; Wei Ma, Auteur ; Mei Han, Auteur . - 2010 . - pp. 134-140. Génie Chimique Langues : Anglais (eng) in Chemical engineering journal > Vol. 156 N° 1 (Janvier 2010) . - pp. 134-140 Mots-clés : Adsorption  Lithium  Lithium  ion  sieve  Modeling  Kinetics Index. décimale : 660 Résumé : Magnesium (II) doped spinel lithium manganese oxide (LMS) was synthesized by soft chemical method and nanosized ion sieve manganese oxide (HMS) was prepared by extracting lithium and magnesium from LMS. The characteristics of HMS were studied by X-ray diffraction, scanning electron microscopy, transmission electron microscopy, surface areas and determination of pH at the point of zero charge. Experiments were performed to study the effects of pH, adsorbent dose, contact time and Li+ concentration. The competitive model was used to describe the competition between Li+–H+ and the applicability of different kinetic models was evaluated. The results showed that the pH at the point of zero charge of HMS was about 7.8. The recycle of HMS explained that it could be used as Li+ adsorbent with topotactical extraction of lithium. Under optimized batch conditions up to 99.2% Li+ could be recovered from solution within 24 h. The adsorption process followed the pseudo-second-order model and followed an intraparticle diffusion model at the beginning. DEWEY : 660 ISSN : 1385-8947 En ligne : http://www.sciencedirect.com/science?_ob=ArticleURL&_udi=B6TFJ-4XF840K-8&_user=6 [...]

A new pump application in heavy oil recovery / Li, Juan in Transactions of the ASME . Journal of fluids engineering, Vol. 134 N° 6 (Juin 2012) 

Public ISBD [article]  in Transactions of the ASME . Journal of fluids engineering > Vol. 134 N° 6 (Juin 2012) . - 03 p. Titre : A new pump application in heavy oil recovery Type de document : texte imprimé Auteurs : Li, Juan, Auteur ; Mei Han, Auteur ; Xiuting Han, Auteur Année de publication : 2012 Article en page(s) : 03 p. Note générale : fluids engineering Langues : Anglais (eng) Mots-clés : heavy  oil;  recovery;  new  pump;  no  leakage;  volumetric  efficiency Index. décimale : 620.1 Essais des matériaux. Défauts des matériaux. Protection des matériaux Résumé : In order to promote heavy oil recovery and solve the conventional plunger pump problems, which include wear, large leakage, and a stuck pump in the process of heavy oil production, this paper reports on the research and development of a new pump, and promotes its application in heavy oil recovery. With the use of the new pump, an advanced level of no leakage in a deep well with heavy oil is achieved and it is shown that the pump remarkably improves the pump volumetric efficiency. DEWEY : 620.1 ISSN : 0098-2202 En ligne : http://asmedl.org/getabs/servlet/GetabsServlet?prog=normal&id=JFEGA4000134000006 [...] [article] A new pump application in heavy oil recovery [texte imprimé] / Li, Juan, Auteur ; Mei Han, Auteur ; Xiuting Han, Auteur . - 2012 . - 03 p. fluids engineering Langues : Anglais (eng) in Transactions of the ASME . Journal of fluids engineering > Vol. 134 N° 6 (Juin 2012) . - 03 p. Mots-clés : heavy  oil;  recovery;  new  pump;  no  leakage;  volumetric  efficiency Index. décimale : 620.1 Essais des matériaux. Défauts des matériaux. Protection des matériaux Résumé : In order to promote heavy oil recovery and solve the conventional plunger pump problems, which include wear, large leakage, and a stuck pump in the process of heavy oil production, this paper reports on the research and development of a new pump, and promotes its application in heavy oil recovery. With the use of the new pump, an advanced level of no leakage in a deep well with heavy oil is achieved and it is shown that the pump remarkably improves the pump volumetric efficiency. DEWEY : 620.1 ISSN : 0098-2202 En ligne : http://asmedl.org/getabs/servlet/GetabsServlet?prog=normal&id=JFEGA4000134000006 [...]