Documents disponibles écrits par cet auteur

Surface modification of cellulose by PCL grafts / Olivier Paquet in Acta materialia, Vol. 58 N° 3 (Fevrier 2010) 

Public ISBD [article]  in Acta materialia > Vol. 58 N° 3 (Fevrier 2010) . - pp. 792-801 Titre : Surface modification of cellulose by PCL grafts Type de document : texte imprimé Auteurs : Olivier Paquet, Auteur ; Mohammed Krouit, Auteur ; Julien Bras, Auteur Article en page(s) : pp. 792-801 Note générale : Métallurgie Langues : Anglais (eng) Mots-clés : Cellulose  fibres  Surface  grafting  Polycaprolactone  XPS  analysis  Biodegradability Index. décimale : 669 Métallurgie Résumé : Two cellulosic substrates (microcrystalline cellulose, MCC, and bleached kraft softwood pulps, BSK) were grafted by polycaprolactone (PCL) chains with different molecular weights, following a three-step procedure using non-swelling conditions in order to limit the reaction to their surface. First, one of the two OH PCL ends was blocked by phenyl isocyanate and the reaction product (adduct 1) was subsequently reacted with 2,4-toluene diisocyanate (adduct 2) to provide it with an NCO function, capable of reacting with cellulose. The ensuing PCL-grafted cellulosic materials were characterized by weight gain, elemental analysis, contact angle measurements, attenuated total reflexion–Fourier transform infrared (ATR–FTIR), X-ray photoelectron spectroscopy (XPS) and biodegradation tests. The modification was proven to occur by the presence of nitrogen atoms in the elemental analysis tests and XPS spectra of modified and soxhlet-extracted cellulose. The contact angle measurements have also shown that the surface became as hydrophobic as PCL itself. The polar component of the surface energy of cellulosic substrates before treatment was found to be about 32 and 10 mJ m−2, for MCC and BSK, respectively. This value vanished to practically zero after grafting with different PCLs. The strategy proposed in the present work is original since, to the best of our knowledge, this paper reports for the first time the chemical “grafting onto” of the cellulose surface by PCL macromolecular structures, with the aim of obtaining fibre–matrix co-continuous fully sustainable and biodegradable composite materials. DEWEY : 669 ISSN : 1359-6454 En ligne : http://www.sciencedirect.com/science?_ob=PublicationURL&_tockey=%23TOC%235556%23 [...] [article] Surface modification of cellulose by PCL grafts [texte imprimé] / Olivier Paquet, Auteur ; Mohammed Krouit, Auteur ; Julien Bras, Auteur . - pp. 792-801. Métallurgie Langues : Anglais (eng) in Acta materialia > Vol. 58 N° 3 (Fevrier 2010) . - pp. 792-801 Mots-clés : Cellulose  fibres  Surface  grafting  Polycaprolactone  XPS  analysis  Biodegradability Index. décimale : 669 Métallurgie Résumé : Two cellulosic substrates (microcrystalline cellulose, MCC, and bleached kraft softwood pulps, BSK) were grafted by polycaprolactone (PCL) chains with different molecular weights, following a three-step procedure using non-swelling conditions in order to limit the reaction to their surface. First, one of the two OH PCL ends was blocked by phenyl isocyanate and the reaction product (adduct 1) was subsequently reacted with 2,4-toluene diisocyanate (adduct 2) to provide it with an NCO function, capable of reacting with cellulose. The ensuing PCL-grafted cellulosic materials were characterized by weight gain, elemental analysis, contact angle measurements, attenuated total reflexion–Fourier transform infrared (ATR–FTIR), X-ray photoelectron spectroscopy (XPS) and biodegradation tests. The modification was proven to occur by the presence of nitrogen atoms in the elemental analysis tests and XPS spectra of modified and soxhlet-extracted cellulose. The contact angle measurements have also shown that the surface became as hydrophobic as PCL itself. The polar component of the surface energy of cellulosic substrates before treatment was found to be about 32 and 10 mJ m−2, for MCC and BSK, respectively. This value vanished to practically zero after grafting with different PCLs. The strategy proposed in the present work is original since, to the best of our knowledge, this paper reports for the first time the chemical “grafting onto” of the cellulose surface by PCL macromolecular structures, with the aim of obtaining fibre–matrix co-continuous fully sustainable and biodegradable composite materials. DEWEY : 669 ISSN : 1359-6454 En ligne : http://www.sciencedirect.com/science?_ob=PublicationURL&_tockey=%23TOC%235556%23 [...]

Surface modification of cellulose by PCL grafts / Olivier Paquet in Acta materialia, Vol. 58 N° 3 (Fevrier 2010) 

Public ISBD [article]  in Acta materialia > Vol. 58 N° 3 (Fevrier 2010) . - pp. 792–801 Titre : Surface modification of cellulose by PCL grafts Type de document : texte imprimé Auteurs : Olivier Paquet, Auteur ; Mohammed Krouit, Auteur ; Julien Bras, Auteur Année de publication : 2011 Article en page(s) : pp. 792–801 Note générale : Métallurgie Langues : Anglais (eng) Mots-clés : Cellulose  fibres  Surface  grafting  Polycaprolactone  XPS  analysis  Biodegradability Résumé : Two cellulosic substrates (microcrystalline cellulose, MCC, and bleached kraft softwood pulps, BSK) were grafted by polycaprolactone (PCL) chains with different molecular weights, following a three-step procedure using non-swelling conditions in order to limit the reaction to their surface. First, one of the two OH PCL ends was blocked by phenyl isocyanate and the reaction product (adduct 1) was subsequently reacted with 2,4-toluene diisocyanate (adduct 2) to provide it with an NCO function, capable of reacting with cellulose. The ensuing PCL-grafted cellulosic materials were characterized by weight gain, elemental analysis, contact angle measurements, attenuated total reflexion–Fourier transform infrared (ATR–FTIR), X-ray photoelectron spectroscopy (XPS) and biodegradation tests. The modification was proven to occur by the presence of nitrogen atoms in the elemental analysis tests and XPS spectra of modified and soxhlet-extracted cellulose. The contact angle measurements have also shown that the surface became as hydrophobic as PCL itself. The polar component of the surface energy of cellulosic substrates before treatment was found to be about 32 and 10 mJ m−2, for MCC and BSK, respectively. This value vanished to practically zero after grafting with different PCLs. The strategy proposed in the present work is original since, to the best of our knowledge, this paper reports for the first time the chemical “grafting onto” of the cellulose surface by PCL macromolecular structures, with the aim of obtaining fibre–matrix co-continuous fully sustainable and biodegradable composite materials. DEWEY : 669 ISSN : 1359-6454 En ligne : http://www.sciencedirect.com/science/article/pii/S1359645409006636 [article] Surface modification of cellulose by PCL grafts [texte imprimé] / Olivier Paquet, Auteur ; Mohammed Krouit, Auteur ; Julien Bras, Auteur . - 2011 . - pp. 792–801. Métallurgie Langues : Anglais (eng) in Acta materialia > Vol. 58 N° 3 (Fevrier 2010) . - pp. 792–801 Mots-clés : Cellulose  fibres  Surface  grafting  Polycaprolactone  XPS  analysis  Biodegradability Résumé : Two cellulosic substrates (microcrystalline cellulose, MCC, and bleached kraft softwood pulps, BSK) were grafted by polycaprolactone (PCL) chains with different molecular weights, following a three-step procedure using non-swelling conditions in order to limit the reaction to their surface. First, one of the two OH PCL ends was blocked by phenyl isocyanate and the reaction product (adduct 1) was subsequently reacted with 2,4-toluene diisocyanate (adduct 2) to provide it with an NCO function, capable of reacting with cellulose. The ensuing PCL-grafted cellulosic materials were characterized by weight gain, elemental analysis, contact angle measurements, attenuated total reflexion–Fourier transform infrared (ATR–FTIR), X-ray photoelectron spectroscopy (XPS) and biodegradation tests. The modification was proven to occur by the presence of nitrogen atoms in the elemental analysis tests and XPS spectra of modified and soxhlet-extracted cellulose. The contact angle measurements have also shown that the surface became as hydrophobic as PCL itself. The polar component of the surface energy of cellulosic substrates before treatment was found to be about 32 and 10 mJ m−2, for MCC and BSK, respectively. This value vanished to practically zero after grafting with different PCLs. The strategy proposed in the present work is original since, to the best of our knowledge, this paper reports for the first time the chemical “grafting onto” of the cellulose surface by PCL macromolecular structures, with the aim of obtaining fibre–matrix co-continuous fully sustainable and biodegradable composite materials. DEWEY : 669 ISSN : 1359-6454 En ligne : http://www.sciencedirect.com/science/article/pii/S1359645409006636