Documents disponibles écrits par cet auteur

Frame layer rate control for H.264/AVC with hierarchical B-frames / Ming Li in Signal processing. Image communication, Vol. 24 N° 3 (Mars 2009) 

Public ISBD [article]  in Signal processing. Image communication > Vol. 24 N° 3 (Mars 2009) . - pp. 177-199 Titre : Frame layer rate control for H.264/AVC with hierarchical B-frames Type de document : texte imprimé Auteurs : Ming Li, Auteur ; Yilin Chang, Auteur ; Fuzheng Yang, Auteur Article en page(s) : pp. 177-199 Note générale : Electronique Langues : Anglais (eng) Mots-clés : Hierarchical  B-frames  Rate  control  H.264/AVC Index. décimale : 621.382 Dispositifs électroniques utilisant les effets des corps solides. Dispositifs semi-conducteurs Résumé : Hierarchical B-frames contribute to improvement of coding performance when introduced into H.264/AVC. However, the existing rate control schemes for H.264/AVC, which are mainly applied to IPPP and IBBP coding structures, cannot work efficiently for the coding structures with hierarchical B-frames. In this paper, a frame layer rate control scheme for hierarchical B-frames is proposed. Firstly, an adaptive starting quantization parameter (QP) determination method is implemented to derive the QP for the first coding frame based on the available channel bit rate and the content of the current video sequence. Then, the target bit budget for a group of pictures (GOP) is calculated based on the target bit rate and the buffer status. Afterwards, a temporal level (TL) layer rate control phase is introduced, and the GOP layer target bit budget is allocated to each TL. In the frame layer rate control phase, a method based on a rate-distortion model and the coding properties of the previous coded key frames is derived to determine the QP for the current key frame. For hierarchical B-frames, we introduce a typical weighting factor in the determination of their target bit budgets to address the features of the hierarchical coding structures. This weighting factor is calculated according to the target bit budget of the GOP layer and the knowledge obtained from the previous coded B-frames in each TL. Subsequently, the QP for coding the current B-frame is computed by a quadratic model with different model parameters for different TLs, and the computed QP is further adaptively adjusted according to the usage of the target bit budgets. After coding the current frame, an update stage, in which a threshold-based method is integrated to avoid model degradation, is invoked to update the parameters for rate control. Experimental results demonstrate that when the proposed rate control scheme is applied to the coding structure with hierarchical B-frames in H.264/AVC, the actual coding bit rates can match the target bit rates very well, and the encoding performance is also improved. DEWEY : 361.382 ISSN : 0923-5965 En ligne : http://www.sciencedirect.com/science?_ob=PublicationURL&_tockey=%23TOC%235640%23 [...] [article] Frame layer rate control for H.264/AVC with hierarchical B-frames [texte imprimé] / Ming Li, Auteur ; Yilin Chang, Auteur ; Fuzheng Yang, Auteur . - pp. 177-199. Electronique Langues : Anglais (eng) in Signal processing. Image communication > Vol. 24 N° 3 (Mars 2009) . - pp. 177-199 Mots-clés : Hierarchical  B-frames  Rate  control  H.264/AVC Index. décimale : 621.382 Dispositifs électroniques utilisant les effets des corps solides. Dispositifs semi-conducteurs Résumé : Hierarchical B-frames contribute to improvement of coding performance when introduced into H.264/AVC. However, the existing rate control schemes for H.264/AVC, which are mainly applied to IPPP and IBBP coding structures, cannot work efficiently for the coding structures with hierarchical B-frames. In this paper, a frame layer rate control scheme for hierarchical B-frames is proposed. Firstly, an adaptive starting quantization parameter (QP) determination method is implemented to derive the QP for the first coding frame based on the available channel bit rate and the content of the current video sequence. Then, the target bit budget for a group of pictures (GOP) is calculated based on the target bit rate and the buffer status. Afterwards, a temporal level (TL) layer rate control phase is introduced, and the GOP layer target bit budget is allocated to each TL. In the frame layer rate control phase, a method based on a rate-distortion model and the coding properties of the previous coded key frames is derived to determine the QP for the current key frame. For hierarchical B-frames, we introduce a typical weighting factor in the determination of their target bit budgets to address the features of the hierarchical coding structures. This weighting factor is calculated according to the target bit budget of the GOP layer and the knowledge obtained from the previous coded B-frames in each TL. Subsequently, the QP for coding the current B-frame is computed by a quadratic model with different model parameters for different TLs, and the computed QP is further adaptively adjusted according to the usage of the target bit budgets. After coding the current frame, an update stage, in which a threshold-based method is integrated to avoid model degradation, is invoked to update the parameters for rate control. Experimental results demonstrate that when the proposed rate control scheme is applied to the coding structure with hierarchical B-frames in H.264/AVC, the actual coding bit rates can match the target bit rates very well, and the encoding performance is also improved. DEWEY : 361.382 ISSN : 0923-5965 En ligne : http://www.sciencedirect.com/science?_ob=PublicationURL&_tockey=%23TOC%235640%23 [...]