| Titre : | Mechanism-based approach for the deployment of a tensegrity-ring module (2012) |
| Auteurs : | L. Rhode-Barbarigos, Auteur ; C. Schulin, Auteur ; N. Bel Hadj Ali, Auteur |
| Type de document : | Article : texte imprimé |
| Dans : | Journal of structural engineering (Vol. 138 N° 4, Avril 2012) |
| Article en page(s) : | pp. 539–548 |
| Note générale : | Génie Civil |
| Langues : | Anglais |
| Tags : | Tensegrity structures Deployable Active Dynamic relaxation method |
| Résumé : | Tensegrity structures are spatial systems composed of tension and compression components in a self-equilibrated prestress stable state. Although the concept is over 60 years old, few tensegrity-based structures have been used for engineering purposes. Tensegrity-ring modules are deployable modules composed of a single strut circuit that, when combined, create a hollow rope. The “hollow-rope” concept was shown to be a viable system for a tensegrity footbridge. This paper focuses on the deployment of pentagonal ring modules for a deployable footbridge application. The deployment sequence of a module is controlled by adjusting cable lengths (cable actuation). The geometric study of the deployment for a single module identified the path space allowing deployment without strut contact. Additionally, a deployment path that reduces the number of actuated cables was found. The number of actuated cables is further reduced by employing continuous cables. A first-generation prototype was used to verify both findings experimentally. The structural response during both unfolding and folding is studied numerically using the dynamic relaxation method. The deployment-analysis algorithm applies cable-length changes first to create finite mechanisms allowing deployment and then to find new equilibrium configurations. Therefore, the actuation-step size is identified as the most critical parameter for a successful deployment analysis. Finally, it is shown that the deployability of the footbridge does not affect its element sizing because stresses during deployment are lower than in-service values. |
| ISSN : | 0733-9445 |
| En ligne : | http://ascelibrary.org/doi/abs/10.1061/%28ASCE%29ST.1943-541X.0000491 |
