[article]
| Titre : |
Mechanical characterization of hotplate synthesized vanadium oxide nanobelts |
| Type de document : |
texte imprimé |
| Auteurs : |
Yanwu Zhu, Auteur ; Yousheng Zhang, Auteur ; Ling Dai, Auteur |
| Article en page(s) : |
pp. 415-420 |
| Note générale : |
Métallurgie |
| Langues : |
Anglais (eng) |
| Mots-clés : |
Vanadium oxide Nanobelts Young’s modulus Structure characterization |
| Index. décimale : |
669 Métallurgie |
| Résumé : |
Vanadium oxide nanobelts have been synthesized on Si or SiN substrates by simply heating vanadium foils on a hotplate.
As-grown nanobelts were characterized as V2O5·nH2O (0.3
Using an electromechanical resonance method, the Young’s modulus of the nanobelts was measured in situ in a scanning electron microscope.
It was found that the Young’s modulus of as-grown nanobelts varied between 5.6 and 98 GPa, with a typical Q-factor of 120.
Such scattered values were attributed to the different contents of water molecules in the nanobelts.
After annealing at 450 °C in vacuum, the nanobelts were converted to α-V2O5 phase and a polycrystalline structure was observed.
The Young’s modulus of the annealed nanobelts showed more consistent values at an average of 28.9 GPa, lower than the calculated modulus of bulk α-V2O5 at 68 GPa. |
| DEWEY : |
669 |
| ISSN : |
1359-6454 |
| En ligne : |
http://www.sciencedirect.com/science?_ob=PublicationURL&_tockey=%23TOC%235556%23 [...] |
in Acta materialia > Vol. 58 N° 2 (Janvier 2010) . - pp. 415-420
[article] Mechanical characterization of hotplate synthesized vanadium oxide nanobelts [texte imprimé] / Yanwu Zhu, Auteur ; Yousheng Zhang, Auteur ; Ling Dai, Auteur . - pp. 415-420. Métallurgie Langues : Anglais ( eng) in Acta materialia > Vol. 58 N° 2 (Janvier 2010) . - pp. 415-420
| Mots-clés : |
Vanadium oxide Nanobelts Young’s modulus Structure characterization |
| Index. décimale : |
669 Métallurgie |
| Résumé : |
Vanadium oxide nanobelts have been synthesized on Si or SiN substrates by simply heating vanadium foils on a hotplate.
As-grown nanobelts were characterized as V2O5·nH2O (0.3
Using an electromechanical resonance method, the Young’s modulus of the nanobelts was measured in situ in a scanning electron microscope.
It was found that the Young’s modulus of as-grown nanobelts varied between 5.6 and 98 GPa, with a typical Q-factor of 120.
Such scattered values were attributed to the different contents of water molecules in the nanobelts.
After annealing at 450 °C in vacuum, the nanobelts were converted to α-V2O5 phase and a polycrystalline structure was observed.
The Young’s modulus of the annealed nanobelts showed more consistent values at an average of 28.9 GPa, lower than the calculated modulus of bulk α-V2O5 at 68 GPa. |
| DEWEY : |
669 |
| ISSN : |
1359-6454 |
| En ligne : |
http://www.sciencedirect.com/science?_ob=PublicationURL&_tockey=%23TOC%235556%23 [...] |
|