[article]
| Titre : |
Fouling mechanisms in axial compressors |
| Type de document : |
texte imprimé |
| Auteurs : |
Rainer Kurz, Auteur ; Klaus Brun, Auteur |
| Année de publication : |
2012 |
| Article en page(s) : |
09 p. |
| Note générale : |
Génie mécanique |
| Langues : |
Anglais (eng) |
| Mots-clés : |
Aerodynamics Blades Compressors Gas turbines Maintenance engineering Surface roughness |
| Index. décimale : |
620.1 Essais des matériaux. Défauts des matériaux. Protection des matériaux |
| Résumé : |
Fouling of compressor blades is an important mechanism leading to performance deterioration in gas turbines over time. Fouling is caused by the adherence of particles to airfoils and annulus surfaces. Particles that cause fouling are typically smaller than 2 to 10 microns. Smoke, oil mists, carbon, and sea salts are common examples. Fouling can be controlled by appropriate air filtration systems, and can often be reversed to some degree by detergent washing of components. The adherence of particles is impacted by oil or water mists. The result is a build up of material that causes increased surface roughness and to some degree changes the shape of the airfoil (if the material build up forms thicker layers of deposits), with subsequent deterioration in performance. Fouling mechanisms are evaluated based on observed data, and a discussion on fouling susceptibility is provided. A particular emphasis will be on the capabilities of modern air filtration systems. |
| DEWEY : |
620.1 |
| ISSN : |
0742-4795 |
| En ligne : |
http://asmedl.org/getabs/servlet/GetabsServlet?prog=normal&id=JETPEZ000134000003 [...] |
in Transactions of the ASME . Journal of engineering for gas turbines and power > Vol. 134 N° 3 (Mars 2012) . - 09 p.
[article] Fouling mechanisms in axial compressors [texte imprimé] / Rainer Kurz, Auteur ; Klaus Brun, Auteur . - 2012 . - 09 p. Génie mécanique Langues : Anglais ( eng) in Transactions of the ASME . Journal of engineering for gas turbines and power > Vol. 134 N° 3 (Mars 2012) . - 09 p.
| Mots-clés : |
Aerodynamics Blades Compressors Gas turbines Maintenance engineering Surface roughness |
| Index. décimale : |
620.1 Essais des matériaux. Défauts des matériaux. Protection des matériaux |
| Résumé : |
Fouling of compressor blades is an important mechanism leading to performance deterioration in gas turbines over time. Fouling is caused by the adherence of particles to airfoils and annulus surfaces. Particles that cause fouling are typically smaller than 2 to 10 microns. Smoke, oil mists, carbon, and sea salts are common examples. Fouling can be controlled by appropriate air filtration systems, and can often be reversed to some degree by detergent washing of components. The adherence of particles is impacted by oil or water mists. The result is a build up of material that causes increased surface roughness and to some degree changes the shape of the airfoil (if the material build up forms thicker layers of deposits), with subsequent deterioration in performance. Fouling mechanisms are evaluated based on observed data, and a discussion on fouling susceptibility is provided. A particular emphasis will be on the capabilities of modern air filtration systems. |
| DEWEY : |
620.1 |
| ISSN : |
0742-4795 |
| En ligne : |
http://asmedl.org/getabs/servlet/GetabsServlet?prog=normal&id=JETPEZ000134000003 [...] |
|
Fouling mechanisms in axial compressors in Transactions of the ASME . Journal of engineering for gas turbines and power, Vol. 134 N° 3 (Mars 2012)
