Numerical investigation of sorption enhanced steam methane reforming process using computational fluid dynamics eulerian−eulerian code / Di Carlo, A. in Industrial & engineering chemistry research, Vol. 49 N° 4 (Fevrier 2010)  

Public ISBD [article]  inIndustrial & engineering chemistry research > Vol. 49 N° 4 (Fevrier 2010) . - pp 1561–1576 Titre : Numerical investigation of sorption enhanced steam methane reforming process using computational fluid dynamics eulerian−eulerian code Type de document : texte imprimé Auteurs : Di Carlo, A., Auteur ; Bocci, E., Auteur ; Zuccari, F., Auteur Année de publication : 2010 Article en page(s) : pp 1561–1576 Note générale : Chimie industrielle Langues : Anglais (eng) Mots-clés : Sorption Methane Computational fluid dynamics. Résumé : This paper highlights the use of a fluidized bed reactor of 10 cm i.d. for producing hydrogen by sorption-enhanced steam methane reforming (SE-SMR). The model used for the hydrodynamic behavior of the bed is Eulerian−Eulerian. The kinetics of the steam methane reforming, water−gas shift, and carbonation reactions are based on literature values. Intra- and extraparticle mass transfer effects are considered together with the kinetics in the chemical models. The bed is composed of an Ni catalyst and calcined dolomite. A static bed height of 20 cm is investigated. A volume ratio of dolomite/catalyst is varied from 0−5 during the simulation. Dry hydrogen mole fraction of >0.93 is predicted for temperatures of 900 K and a superficial gas velocity of 0.3 m/s with a dolomite/catalyst ratio >2. Furthermore, the bubble formation in the fluidized bed influence product yields and product oscillations are observed. Another important aspect is that when the dolomite/catalyst ratio is higher than 2 the necessary heat for the reforming endothermic reaction can be almost entirely supplied by the exothermic reaction of carbonation. DEWEY : 660 ISSN : 0888-5885 En ligne : http://pubs.acs.org/doi/abs/10.1021/ie900748t [article] Numerical investigation of sorption enhanced steam methane reforming process using computational fluid dynamics eulerian−eulerian code [texte imprimé] / Di Carlo, A., Auteur ; Bocci, E., Auteur ; Zuccari, F., Auteur . - 2010 . - pp 1561–1576. Chimie industrielle Langues : Anglais (eng) in Industrial & engineering chemistry research > Vol. 49 N° 4 (Fevrier 2010) . - pp 1561–1576 Mots-clés : Sorption Methane Computational fluid dynamics. Résumé : This paper highlights the use of a fluidized bed reactor of 10 cm i.d. for producing hydrogen by sorption-enhanced steam methane reforming (SE-SMR). The model used for the hydrodynamic behavior of the bed is Eulerian−Eulerian. The kinetics of the steam methane reforming, water−gas shift, and carbonation reactions are based on literature values. Intra- and extraparticle mass transfer effects are considered together with the kinetics in the chemical models. The bed is composed of an Ni catalyst and calcined dolomite. A static bed height of 20 cm is investigated. A volume ratio of dolomite/catalyst is varied from 0−5 during the simulation. Dry hydrogen mole fraction of >0.93 is predicted for temperatures of 900 K and a superficial gas velocity of 0.3 m/s with a dolomite/catalyst ratio >2. Furthermore, the bubble formation in the fluidized bed influence product yields and product oscillations are observed. Another important aspect is that when the dolomite/catalyst ratio is higher than 2 the necessary heat for the reforming endothermic reaction can be almost entirely supplied by the exothermic reaction of carbonation. DEWEY : 660 ISSN : 0888-5885 En ligne : http://pubs.acs.org/doi/abs/10.1021/ie900748t

Exemplaires

Code-barres	Cote	Support	Localisation	Section	Disponibilité
aucun exemplaire