Documents disponibles écrits par cet auteur

Computational fluid dynamics evaluation of heat transfer correlations for sodium flows in a heat exchanger / Seok-Ki Choi in Journal of heat transfer, Vol. 132 N° 5 (Mai 2010) 

Public ISBD [article]  in Journal of heat transfer > Vol. 132 N° 5 (Mai 2010) . - pp. [051801-1/6] Titre : Computational fluid dynamics evaluation of heat transfer correlations for sodium flows in a heat exchanger Type de document : texte imprimé Auteurs : Seok-Ki Choi, Auteur ; Seong-O Kim, Auteur ; Hoon-Ki Choi, Auteur Article en page(s) : pp. [051801-1/6] Note générale : Physique Langues : Anglais (eng) Mots-clés : Computational  fluid  dynamics  Heat  exchangers  Heat  transfer  Pipe  flow  Sodium  Turbulence Index. décimale : 536 Chaleur. Thermodynamique Résumé : A numerical study for the evaluation of heat transfer correlations for sodium flows in a heat exchanger of a fast breeder nuclear reactor is performed. Three different types of flows such as parallel flow, cross flow, and two inclined flows are considered. Calculations are performed for these three typical flows in a heat exchanger changing turbulence models. The tested turbulence models are the shear stress transport (SST) model and the SSG-Reynolds stress turbulence model by Speziale, Sarkar, and Gaski (1991, “Modelling the Pressure-Strain Correlation of Turbulence: An Invariant Dynamical System Approach,” J. Fluid Mech., 227, pp. 245–272). The computational model for parallel flow is a flow past tubes inside a circular cylinder and those for the cross flow and inclined flows are flows past the perpendicular and inclined tube banks enclosed by a rectangular duct. The computational results show that the SST model produces the most reliable results that can distinguish the best heat transfer correlation from other correlations for the three different flows. It was also shown that the SSG-RSTM high-Reynolds number turbulence model does not deal with the low-Prandtl number effect properly when the Peclet number is small. According to the present calculations for a parallel flow, all the old correlations do not match with the present numerical solutions and a new correlation is proposed. The correlations by Dwyer (1966, “Recent Developments in Liquid-Metal Heat Transfer,” At. Energy Rev., 4, pp. 3–92) for a cross flow and its modified correlation that takes into account of flow inclination for inclined flows work best and are accurate enough to be used for the design of the heat exchanger. DEWEY : 536 ISSN : 0022-1481 En ligne : http://asmedl.aip.org/vsearch/servlet/VerityServlet?KEY=JHTRAO&smode=strresults& [...] [article] Computational fluid dynamics evaluation of heat transfer correlations for sodium flows in a heat exchanger [texte imprimé] / Seok-Ki Choi, Auteur ; Seong-O Kim, Auteur ; Hoon-Ki Choi, Auteur . - pp. [051801-1/6]. Physique Langues : Anglais (eng) in Journal of heat transfer > Vol. 132 N° 5 (Mai 2010) . - pp. [051801-1/6] Mots-clés : Computational  fluid  dynamics  Heat  exchangers  Heat  transfer  Pipe  flow  Sodium  Turbulence Index. décimale : 536 Chaleur. Thermodynamique Résumé : A numerical study for the evaluation of heat transfer correlations for sodium flows in a heat exchanger of a fast breeder nuclear reactor is performed. Three different types of flows such as parallel flow, cross flow, and two inclined flows are considered. Calculations are performed for these three typical flows in a heat exchanger changing turbulence models. The tested turbulence models are the shear stress transport (SST) model and the SSG-Reynolds stress turbulence model by Speziale, Sarkar, and Gaski (1991, “Modelling the Pressure-Strain Correlation of Turbulence: An Invariant Dynamical System Approach,” J. Fluid Mech., 227, pp. 245–272). The computational model for parallel flow is a flow past tubes inside a circular cylinder and those for the cross flow and inclined flows are flows past the perpendicular and inclined tube banks enclosed by a rectangular duct. The computational results show that the SST model produces the most reliable results that can distinguish the best heat transfer correlation from other correlations for the three different flows. It was also shown that the SSG-RSTM high-Reynolds number turbulence model does not deal with the low-Prandtl number effect properly when the Peclet number is small. According to the present calculations for a parallel flow, all the old correlations do not match with the present numerical solutions and a new correlation is proposed. The correlations by Dwyer (1966, “Recent Developments in Liquid-Metal Heat Transfer,” At. Energy Rev., 4, pp. 3–92) for a cross flow and its modified correlation that takes into account of flow inclination for inclined flows work best and are accurate enough to be used for the design of the heat exchanger. DEWEY : 536 ISSN : 0022-1481 En ligne : http://asmedl.aip.org/vsearch/servlet/VerityServlet?KEY=JHTRAO&smode=strresults& [...]