Electrospinning of cellulose acetate phthalate from different solvent systems / Olaru, Niculae in Industrial & engineering chemistry research, Vol. 49 N° 4 (Fevrier 2010)  

Public ISBD [article]  inIndustrial & engineering chemistry research > Vol. 49 N° 4 (Fevrier 2010) . - pp 1953–1957 Titre : Electrospinning of cellulose acetate phthalate from different solvent systems Type de document : texte imprimé Auteurs : Olaru, Niculae, Auteur ; Olaru, Liliana, Auteur Année de publication : 2010 Article en page(s) : pp 1953–1957 Note générale : Chimie industrielle Langues : Anglais (eng) Mots-clés : Electrospinning Solvent systems. Résumé : Electrospinning of cellulose acetate phthalate (CAP) has been performed from an acetone−water mixture 85/15 (v/v), 2-methoxyethanol, and a 2-methoxyethanol−acetone−water mixture 50/42.5/7.5 (v/v/v). It has been observed that, at low polymer concentration (12.5%, w/v), a solution in an acetone−water mixture 85/15 (v/v) gave uniform fibers with diameters lower than 500 nm, whereas in 2-methoxyethanol fine particles that look like void hemispheres were obtained. The morphology of the electrospun CAP from this solvent gradually changed by increasing the polymer concentration and beaded fibers and fibers without beads have been produced from solutions of 25% (w/v) and 35% (w/v), respectively. Smooth filaments with no beads and diameters of about 600 nm could be obtained from a solution of CAP in the ternary system 2-methoxyethanol−acetone−water 50/42.5/7.5 (v/v/v) at a polymer concentration of 25% (w/v). The electrospinnability of CAP from 2-methoxyethanol-containing solvents was better than that from the acetone−water mixture 85/15 (v/v). DEWEY : 660 ISSN : 0888-5885 En ligne : http://pubs.acs.org/doi/abs/10.1021/ie901427f [article] Electrospinning of cellulose acetate phthalate from different solvent systems [texte imprimé] / Olaru, Niculae, Auteur ; Olaru, Liliana, Auteur . - 2010 . - pp 1953–1957. Chimie industrielle Langues : Anglais (eng) in Industrial & engineering chemistry research > Vol. 49 N° 4 (Fevrier 2010) . - pp 1953–1957 Mots-clés : Electrospinning Solvent systems. Résumé : Electrospinning of cellulose acetate phthalate (CAP) has been performed from an acetone−water mixture 85/15 (v/v), 2-methoxyethanol, and a 2-methoxyethanol−acetone−water mixture 50/42.5/7.5 (v/v/v). It has been observed that, at low polymer concentration (12.5%, w/v), a solution in an acetone−water mixture 85/15 (v/v) gave uniform fibers with diameters lower than 500 nm, whereas in 2-methoxyethanol fine particles that look like void hemispheres were obtained. The morphology of the electrospun CAP from this solvent gradually changed by increasing the polymer concentration and beaded fibers and fibers without beads have been produced from solutions of 25% (w/v) and 35% (w/v), respectively. Smooth filaments with no beads and diameters of about 600 nm could be obtained from a solution of CAP in the ternary system 2-methoxyethanol−acetone−water 50/42.5/7.5 (v/v/v) at a polymer concentration of 25% (w/v). The electrospinnability of CAP from 2-methoxyethanol-containing solvents was better than that from the acetone−water mixture 85/15 (v/v). DEWEY : 660 ISSN : 0888-5885 En ligne : http://pubs.acs.org/doi/abs/10.1021/ie901427f

Exemplaires

Code-barres	Cote	Support	Localisation	Section	Disponibilité
aucun exemplaire