Documents disponibles écrits par cet auteur

Fuzzy logic and sliding-mode controls applied to six-phase induction machine with open phases / Fnaiech, Mohamed Amine in IEEE transactions on industrial electronics, Vol. 57 N° 1 (Janvier 2010) 

Public ISBD [article]  in IEEE transactions on industrial electronics > Vol. 57 N° 1 (Janvier 2010) . - pp. 354 - 364 Titre : Fuzzy logic and sliding-mode controls applied to six-phase induction machine with open phases Type de document : texte imprimé Auteurs : Fnaiech, Mohamed Amine, Auteur ; Franck Betin, Auteur ; Capolino, Gérard-André, Auteur Article en page(s) : pp. 354 - 364 Note générale : Génie électrique Langues : Anglais (eng) Mots-clés : Drive  control  Fuzzy  logic  control  (FLC)  Multiphase  industion  machine  Position  control  Real-time  implementation  Robustness  Variable  structure  control Index. décimale : 621.38 Dispositifs électroniques. Tubes à électrons. Photocellules. Accélérateurs de particules. Tubes à rayons X Résumé : The faulted mode of a six-phase induction machine (6PIM) denotes that the motor is working with one or more missing phases. This situation leads to torque oscillations and poor tracking behavior. Therefore, the design of a suitable robust control is a challenging task. In this way, this paper presents the application of fuzzy logic and sliding mode controls in order to obtain a high-accuracy positioning of a 6PIM rotor in both healthy and faulted modes. The two control strategies are completely different from a theoretical point of view, but the final objectives are to remove the drawbacks of the specific fault on interest. The experimental results are obtained on a dedicated setup based on a 6PIM coupled with a variable mechanical load and for which up to three phases can be removed. DEWEY : 621.38 ISSN : 0278-0046 En ligne : http://ieeexplore.ieee.org/xpl/freeabs_all.jsp?arnumber=5299018 [article] Fuzzy logic and sliding-mode controls applied to six-phase induction machine with open phases [texte imprimé] / Fnaiech, Mohamed Amine, Auteur ; Franck Betin, Auteur ; Capolino, Gérard-André, Auteur . - pp. 354 - 364. Génie électrique Langues : Anglais (eng) in IEEE transactions on industrial electronics > Vol. 57 N° 1 (Janvier 2010) . - pp. 354 - 364 Mots-clés : Drive  control  Fuzzy  logic  control  (FLC)  Multiphase  industion  machine  Position  control  Real-time  implementation  Robustness  Variable  structure  control Index. décimale : 621.38 Dispositifs électroniques. Tubes à électrons. Photocellules. Accélérateurs de particules. Tubes à rayons X Résumé : The faulted mode of a six-phase induction machine (6PIM) denotes that the motor is working with one or more missing phases. This situation leads to torque oscillations and poor tracking behavior. Therefore, the design of a suitable robust control is a challenging task. In this way, this paper presents the application of fuzzy logic and sliding mode controls in order to obtain a high-accuracy positioning of a 6PIM rotor in both healthy and faulted modes. The two control strategies are completely different from a theoretical point of view, but the final objectives are to remove the drawbacks of the specific fault on interest. The experimental results are obtained on a dedicated setup based on a 6PIM coupled with a variable mechanical load and for which up to three phases can be removed. DEWEY : 621.38 ISSN : 0278-0046 En ligne : http://ieeexplore.ieee.org/xpl/freeabs_all.jsp?arnumber=5299018