Documents disponibles écrits par cet auteur

Current trends in industrial electronics education / Rodriguez-Andina, Juan J. in IEEE transactions on industrial electronics, Vol. 57 N° 10 (Octobre 2010) 

Public ISBD [article]  in IEEE transactions on industrial electronics > Vol. 57 N° 10 (Octobre 2010) . - pp. 3245 - 3252 Titre : Current trends in industrial electronics education Type de document : texte imprimé Auteurs : Rodriguez-Andina, Juan J., Auteur ; Gomes, Luis, Auteur ; Seta Bogosyan, Auteur Année de publication : 2011 Article en page(s) : pp. 3245 - 3252 Note générale : Génie électrique Langues : Anglais (eng) Mots-clés : Cooperative  learning  Learning  systems  Lifelong  learning  Multidisciplinary  education Index. décimale : 621.38 Dispositifs électroniques. Tubes à électrons. Photocellules. Accélérateurs de particules. Tubes à rayons X Résumé : Technology development creates many challenges in the education of industrial-electronics (IE)-related subjects. At the same time, it allows new educational paradigms to be implemented. The main contribution of this paper is to initiate a discussion for the needs and challenges of IE education both at university level and in lifelong learning, in order to meet the requirements of the emerging technologies of the 21st century. Educational challenges and opportunities are first identified and analyzed. Afterward, an overview of state-of-the-art learning methodologies and tools is presented. New educational paradigms and future directions are also identified. DEWEY : 621.38 ISSN : 0278-0046 En ligne : http://ieeexplore.ieee.org/xpl/freeabs_all.jsp?arnumber=5504840 [article] Current trends in industrial electronics education [texte imprimé] / Rodriguez-Andina, Juan J., Auteur ; Gomes, Luis, Auteur ; Seta Bogosyan, Auteur . - 2011 . - pp. 3245 - 3252. Génie électrique Langues : Anglais (eng) in IEEE transactions on industrial electronics > Vol. 57 N° 10 (Octobre 2010) . - pp. 3245 - 3252 Mots-clés : Cooperative  learning  Learning  systems  Lifelong  learning  Multidisciplinary  education Index. décimale : 621.38 Dispositifs électroniques. Tubes à électrons. Photocellules. Accélérateurs de particules. Tubes à rayons X Résumé : Technology development creates many challenges in the education of industrial-electronics (IE)-related subjects. At the same time, it allows new educational paradigms to be implemented. The main contribution of this paper is to initiate a discussion for the needs and challenges of IE education both at university level and in lifelong learning, in order to meet the requirements of the emerging technologies of the 21st century. Educational challenges and opportunities are first identified and analyzed. Afterward, an overview of state-of-the-art learning methodologies and tools is presented. New educational paradigms and future directions are also identified. DEWEY : 621.38 ISSN : 0278-0046 En ligne : http://ieeexplore.ieee.org/xpl/freeabs_all.jsp?arnumber=5504840

Rapid prototyping of graphical user interfaces for petri-net-based controllers / Gomes, Luis in IEEE transactions on industrial electronics, Vol. 57 N° 5 (Mai 2010) 

Public ISBD [article]  in IEEE transactions on industrial electronics > Vol. 57 N° 5 (Mai 2010) . - pp. 1806 - 1813 Titre : Rapid prototyping of graphical user interfaces for petri-net-based controllers Type de document : texte imprimé Auteurs : Gomes, Luis, Auteur ; Lourenco, Joao, Auteur Année de publication : 2011 Article en page(s) : pp. 1806 - 1813 Note générale : Génie électrique Langues : Anglais (eng) Mots-clés : Design  automation  Graphical  user  interfaces  (GUIs)  Modeling  Petri  nets Index. décimale : 621.38 Dispositifs électroniques. Tubes à électrons. Photocellules. Accélérateurs de particules. Tubes à rayons X Résumé : This paper describes a tool framework allowing the rapid prototyping of an animated synoptic application associated with an embedded system controller. The motto for developing this tool framework is to be able to automatically generate controllers with associated graphical user interface (GUI) without writing a line of execution code; instead, the tool framework will provide specific aids allowing the designer to define the controller behavior and associated GUI (including static parts and intended dynamics). The behavior of the controller is described through a low-level Petri-net model, and the tool framework supports the definition of characteristics for the intended GUI and the association of the characteristics of the Petri-net behavioral model with specific characteristics of the GUI through a set of dedicated rules. Two main tools are described. The first one, named as ??Animator,?? allows an interactive definition of the graphical characteristics of the synoptic and automatic code generation. The second one, named as ??Synoptic,?? is responsible for the embedded control-execution part, integrating real-time updating of the GUI. The application of the tool framework to a simple automation system, namely, to the controller of a manufacturing system composed of a four-cell first-in-first-out system, is presented. DEWEY : 621.38 ISSN : 0278-0046 En ligne : http://ieeexplore.ieee.org/xpl/freeabs_all.jsp?arnumber=5229200 [article] Rapid prototyping of graphical user interfaces for petri-net-based controllers [texte imprimé] / Gomes, Luis, Auteur ; Lourenco, Joao, Auteur . - 2011 . - pp. 1806 - 1813. Génie électrique Langues : Anglais (eng) in IEEE transactions on industrial electronics > Vol. 57 N° 5 (Mai 2010) . - pp. 1806 - 1813 Mots-clés : Design  automation  Graphical  user  interfaces  (GUIs)  Modeling  Petri  nets Index. décimale : 621.38 Dispositifs électroniques. Tubes à électrons. Photocellules. Accélérateurs de particules. Tubes à rayons X Résumé : This paper describes a tool framework allowing the rapid prototyping of an animated synoptic application associated with an embedded system controller. The motto for developing this tool framework is to be able to automatically generate controllers with associated graphical user interface (GUI) without writing a line of execution code; instead, the tool framework will provide specific aids allowing the designer to define the controller behavior and associated GUI (including static parts and intended dynamics). The behavior of the controller is described through a low-level Petri-net model, and the tool framework supports the definition of characteristics for the intended GUI and the association of the characteristics of the Petri-net behavioral model with specific characteristics of the GUI through a set of dedicated rules. Two main tools are described. The first one, named as ??Animator,?? allows an interactive definition of the graphical characteristics of the synoptic and automatic code generation. The second one, named as ??Synoptic,?? is responsible for the embedded control-execution part, integrating real-time updating of the GUI. The application of the tool framework to a simple automation system, namely, to the controller of a manufacturing system composed of a four-cell first-in-first-out system, is presented. DEWEY : 621.38 ISSN : 0278-0046 En ligne : http://ieeexplore.ieee.org/xpl/freeabs_all.jsp?arnumber=5229200