Global minimum torque ripple design for direct torque control of induction motor drives / Kuo-Kai, Shyu in IEEE transactions on industrial electronics, Vol. 57 N° 9 (Septembre 2010)  

Public ISBD [article]  inIEEE transactions on industrial electronics > Vol. 57 N° 9 (Septembre 2010) . - pp. 3148 - 3156 Titre : Global minimum torque ripple design for direct torque control of induction motor drives Type de document : texte imprimé Auteurs : Kuo-Kai, Shyu, Auteur ; Juu-Kuh, Lin, Auteur ; Van-Truong, Pham, Auteur Année de publication : 2011 Article en page(s) : pp. 3148 - 3156 Note générale : Génie électrique Langues : Anglais (eng) Mots-clés : Induction motor drives Minimization methods Pulsewidth-modulated inverters Torque control Index. décimale : 621.38 Dispositifs électroniques. Tubes à électrons. Photocellules. Accélérateurs de particules. Tubes à rayons X Résumé : This paper proposes a simple but effective method to reduce the torque ripple for direct torque control (DTC) of induction motor drives. The proposed DTC provides a global minimum torque ripple, which satisfies the root-mean-square (rms) criteria of torque ripple. Such a global minimum torque ripple DTC has not been derived before. The proposed global minimum torque ripple DTC is a two-step design. The first step drives the torque error to zero at the end of the control period. Then, the second step reduces the torque bias and rms ripple by modifying the asymmetry switching patterns of the applied voltage vectors of the first step into symmetry ones. Theoretical analysis is provided to show that the torque ripple of the proposed DTC is a global minimum rms ripple. Furthermore, to verify the effectiveness of this study, a DSP-based experimental induction motor DTC drive system is built. Simulation and experimental results verify that the torque ripple performance has been improved. DEWEY : 621.38 ISSN : 0278--0046 En ligne : http://ieeexplore.ieee.org/xpl/freeabs_all.jsp?arnumber=5371908 [article] Global minimum torque ripple design for direct torque control of induction motor drives [texte imprimé] / Kuo-Kai, Shyu, Auteur ; Juu-Kuh, Lin, Auteur ; Van-Truong, Pham, Auteur . - 2011 . - pp. 3148 - 3156. Génie électrique Langues : Anglais (eng) in IEEE transactions on industrial electronics > Vol. 57 N° 9 (Septembre 2010) . - pp. 3148 - 3156 Mots-clés : Induction motor drives Minimization methods Pulsewidth-modulated inverters Torque control Index. décimale : 621.38 Dispositifs électroniques. Tubes à électrons. Photocellules. Accélérateurs de particules. Tubes à rayons X Résumé : This paper proposes a simple but effective method to reduce the torque ripple for direct torque control (DTC) of induction motor drives. The proposed DTC provides a global minimum torque ripple, which satisfies the root-mean-square (rms) criteria of torque ripple. Such a global minimum torque ripple DTC has not been derived before. The proposed global minimum torque ripple DTC is a two-step design. The first step drives the torque error to zero at the end of the control period. Then, the second step reduces the torque bias and rms ripple by modifying the asymmetry switching patterns of the applied voltage vectors of the first step into symmetry ones. Theoretical analysis is provided to show that the torque ripple of the proposed DTC is a global minimum rms ripple. Furthermore, to verify the effectiveness of this study, a DSP-based experimental induction motor DTC drive system is built. Simulation and experimental results verify that the torque ripple performance has been improved. DEWEY : 621.38 ISSN : 0278--0046 En ligne : http://ieeexplore.ieee.org/xpl/freeabs_all.jsp?arnumber=5371908

Exemplaires

Code-barres	Cote	Support	Localisation	Section	Disponibilité
aucun exemplaire