Documents disponibles écrits par cet auteur

Application of the analytical strip method to antisymmetric laminates / Liecheng Sun in Journal of engineering mechanics, Vol. 136 N° 10 (Octobre 2010) 

Public ISBD [article]  in Journal of engineering mechanics > Vol. 136 N° 10 (Octobre 2010) . - pp.1293-1298 Titre : Application of the analytical strip method to antisymmetric laminates Type de document : texte imprimé Auteurs : Liecheng Sun, Auteur ; Issam E. Harik, Auteur Année de publication : 2010 Article en page(s) : pp.1293-1298 Note générale : Mécanique appliquée Langues : Anglais (eng) Mots-clés : Analytical  techniques  Flexural  strength  Bending  Coupling  Laminated  materials. Résumé : The analytical strip method is presented in this paper for the analysis of the bending-extension coupling problem of antisymmetric thin laminates. A system of three equations of equilibrium, governing the general response of antisymmetric laminates, is reduced to a single eighth-order partial differential equation (PDE) in terms of a displacement function. The PDE is then solved in a single series form to determine the displacement response of antisymmetric cross-ply and angle-ply laminates. The solution is applicable to rectangular laminates with two opposite edges simply supported and the other edges being simply supported, clamped, or free. The laminate can be subjected to any combination of concentrated, uniform, line, and patch loads. This method overcomes the limitations of other analytical methods (e.g., Navier’s and Levy’s) and provides an alternative to numerical, seminumerical, and approximate methods for rectangular plates with two parallel edges simply supported. The results obtained from this method compare very well with the ones derived using the finite-element program ANSYS and, where applicable, the existing classical laminated plate theory. DEWEY : 620.1 ISSN : 0733-9399 En ligne : http://ascelibrary.org/emo/resource/1/jenmdt/v136/i10/p1293_s1?isAuthorized=no [article] Application of the analytical strip method to antisymmetric laminates [texte imprimé] / Liecheng Sun, Auteur ; Issam E. Harik, Auteur . - 2010 . - pp.1293-1298. Mécanique appliquée Langues : Anglais (eng) in Journal of engineering mechanics > Vol. 136 N° 10 (Octobre 2010) . - pp.1293-1298 Mots-clés : Analytical  techniques  Flexural  strength  Bending  Coupling  Laminated  materials. Résumé : The analytical strip method is presented in this paper for the analysis of the bending-extension coupling problem of antisymmetric thin laminates. A system of three equations of equilibrium, governing the general response of antisymmetric laminates, is reduced to a single eighth-order partial differential equation (PDE) in terms of a displacement function. The PDE is then solved in a single series form to determine the displacement response of antisymmetric cross-ply and angle-ply laminates. The solution is applicable to rectangular laminates with two opposite edges simply supported and the other edges being simply supported, clamped, or free. The laminate can be subjected to any combination of concentrated, uniform, line, and patch loads. This method overcomes the limitations of other analytical methods (e.g., Navier’s and Levy’s) and provides an alternative to numerical, seminumerical, and approximate methods for rectangular plates with two parallel edges simply supported. The results obtained from this method compare very well with the ones derived using the finite-element program ANSYS and, where applicable, the existing classical laminated plate theory. DEWEY : 620.1 ISSN : 0733-9399 En ligne : http://ascelibrary.org/emo/resource/1/jenmdt/v136/i10/p1293_s1?isAuthorized=no