Documents disponibles écrits par cet auteur

Feedforward delta modulation for power converters / Chen, Yaow-Ming in IEEE transactions on industrial electronics, Vol. 57 N° 12 (Décembre 2010) 

Public ISBD [article]  in IEEE transactions on industrial electronics > Vol. 57 N° 12 (Décembre 2010) . - pp. 4126 - 4136 Titre : Feedforward delta modulation for power converters Type de document : texte imprimé Auteurs : Chen, Yaow-Ming, Auteur ; Yung-Chu, Chen, Auteur ; Wu, Tsai-Fu, Auteur Année de publication : 2011 Article en page(s) : pp. 4126 - 4136 Note générale : Génie électrique Langues : Anglais (eng) Mots-clés : Dc-ac  inverter  Dc-dc  converter  Delta  modulation  (DM)  Pulsewidth  modulation  (PWM) Index. décimale : 621.38 Dispositifs électroniques. Tubes à électrons. Photocellules. Accélérateurs de particules. Tubes à rayons X Résumé : The objective of this paper is to propose a feedforward delta modulation (FDM) control for switching-mode power converters. The operation principle and mathematical derivation for both the conventional delta modulation (CDM) and the FDM are presented. The proposed FDM uses the control signal to generate the variable integrating slope to obtain better control ability. By comparing to the CDM, the proposed FDM can improve the performance of the dc-ac inverter. The advantages include the following features: 1) wider switching frequency range with smaller electromagnetic interference; 2) larger fundamental component with less harmonics; 3) higher duty-ratio linearity; and 4) elimination of asymmetrical operation. In addition, the proposed FDM can be applied to the dc-dc converter, which cannot be done by using the CDM. It can achieve the fast transient response with voltage-mode control. The FDM controller design strategy for the dc-dc converter is given in this paper, followed by a design example. Finally, experimental results are shown to verify the performance of the proposed FDM for both the dc-dc inverter and the dc-dc converter. DEWEY : 621.38 ISSN : 0278-0046 En ligne : http://ieeexplore.ieee.org/xpl/freeabs_all.jsp?arnumber=5422655 [article] Feedforward delta modulation for power converters [texte imprimé] / Chen, Yaow-Ming, Auteur ; Yung-Chu, Chen, Auteur ; Wu, Tsai-Fu, Auteur . - 2011 . - pp. 4126 - 4136. Génie électrique Langues : Anglais (eng) in IEEE transactions on industrial electronics > Vol. 57 N° 12 (Décembre 2010) . - pp. 4126 - 4136 Mots-clés : Dc-ac  inverter  Dc-dc  converter  Delta  modulation  (DM)  Pulsewidth  modulation  (PWM) Index. décimale : 621.38 Dispositifs électroniques. Tubes à électrons. Photocellules. Accélérateurs de particules. Tubes à rayons X Résumé : The objective of this paper is to propose a feedforward delta modulation (FDM) control for switching-mode power converters. The operation principle and mathematical derivation for both the conventional delta modulation (CDM) and the FDM are presented. The proposed FDM uses the control signal to generate the variable integrating slope to obtain better control ability. By comparing to the CDM, the proposed FDM can improve the performance of the dc-ac inverter. The advantages include the following features: 1) wider switching frequency range with smaller electromagnetic interference; 2) larger fundamental component with less harmonics; 3) higher duty-ratio linearity; and 4) elimination of asymmetrical operation. In addition, the proposed FDM can be applied to the dc-dc converter, which cannot be done by using the CDM. It can achieve the fast transient response with voltage-mode control. The FDM controller design strategy for the dc-dc converter is given in this paper, followed by a design example. Finally, experimental results are shown to verify the performance of the proposed FDM for both the dc-dc inverter and the dc-dc converter. DEWEY : 621.38 ISSN : 0278-0046 En ligne : http://ieeexplore.ieee.org/xpl/freeabs_all.jsp?arnumber=5422655