Corrosion behavior of hydrophobic titanium oxide film pre-treated in hydrogen peroxide solution / M. Wang in Materials and corrosion, Vol. 62 N° 4 (Avril 2011)  

Public ISBD [article]  inMaterials and corrosion > Vol. 62 N° 4 (Avril 2011) . - pp. 320–325 Titre : Corrosion behavior of hydrophobic titanium oxide film pre-treated in hydrogen peroxide solution Type de document : texte imprimé Auteurs : M. Wang, Auteur ; Wang, W., Auteur ; B. L. He, Auteur Année de publication : 2011 Article en page(s) : pp. 320–325 Note générale : Génie Mécanique Langues : Anglais (eng) Mots-clés : Corrosion resistance EIS Hydrophobic Surface morphology Titanium oxide Résumé : Hydrophobic titanium oxide (TiO2) film formed on metallic titanium substrate in hydrogen peroxide solution with a subsequent oxidation under air atmosphere. Component, microstructure, and hydrophobicity of the oxide film were characterized by X-ray diffraction, scanning electron microscope, and water contact angle methods. Corrosion resistance tests were carried out in seawater solution at different heating temperature conditions. Electrochemical impedance spectroscopy techniques and polarization curves were used to study the changes and the corrosion resistance of the TiO2 film. The results demonstrate that the pre-treated TiO2 film heated at 400 °C environment owns small special groove-shaped structure on its surface, which induce higher hydrophobic capability, larger impedance, and better electrochemical stability than the film that was prepared at other temperatures or the Ti with nature formed oxidation film. It would be an ideal candidate as engineering material in deep seawater environment. DEWEY : 620.1 ISSN : 0947-5117 En ligne : http://onlinelibrary.wiley.com/doi/10.1002/maco.200905451/abstract [article] Corrosion behavior of hydrophobic titanium oxide film pre-treated in hydrogen peroxide solution [texte imprimé] / M. Wang, Auteur ; Wang, W., Auteur ; B. L. He, Auteur . - 2011 . - pp. 320–325. Génie Mécanique Langues : Anglais (eng) in Materials and corrosion > Vol. 62 N° 4 (Avril 2011) . - pp. 320–325 Mots-clés : Corrosion resistance EIS Hydrophobic Surface morphology Titanium oxide Résumé : Hydrophobic titanium oxide (TiO2) film formed on metallic titanium substrate in hydrogen peroxide solution with a subsequent oxidation under air atmosphere. Component, microstructure, and hydrophobicity of the oxide film were characterized by X-ray diffraction, scanning electron microscope, and water contact angle methods. Corrosion resistance tests were carried out in seawater solution at different heating temperature conditions. Electrochemical impedance spectroscopy techniques and polarization curves were used to study the changes and the corrosion resistance of the TiO2 film. The results demonstrate that the pre-treated TiO2 film heated at 400 °C environment owns small special groove-shaped structure on its surface, which induce higher hydrophobic capability, larger impedance, and better electrochemical stability than the film that was prepared at other temperatures or the Ti with nature formed oxidation film. It would be an ideal candidate as engineering material in deep seawater environment. DEWEY : 620.1 ISSN : 0947-5117 En ligne : http://onlinelibrary.wiley.com/doi/10.1002/maco.200905451/abstract

Exemplaires

Code-barres	Cote	Support	Localisation	Section	Disponibilité
aucun exemplaire