Documents disponibles écrits par cet auteur

Corrosion behaviors of carbon steel in 55% LiBr solution containing PWVA inhibitor / X. Q. Hu in Materials and corrosion, Vol. 62 N° 5 (Mai 2011) 

Public ISBD [article]  in Materials and corrosion > Vol. 62 N° 5 (Mai 2011) . - pp. 444–448 Titre : Corrosion behaviors of carbon steel in 55% LiBr solution containing PWVA inhibitor Type de document : texte imprimé Auteurs : X. Q. Hu, Auteur ; C. H. Liang, Auteur ; X. N. Wu, Auteur Année de publication : 2011 Article en page(s) : pp. 444–448 Note générale : Génie Mécanique Langues : Anglais (eng) Mots-clés : Corrosion  Corrosion  test  Inhibition  Inhibitor Index. décimale : 620.1 Essais des matériaux. Défauts des matériaux. Protection des matériaux Résumé : The inhibition performance of PWVA inhibitor on carbon steel was studied in 55% LiBr + 0.07 mol/L LiOH solution. Results indicated that PWVA inhibitor decreased both anodic and cathodic polarization current density and widened the passive potential region of carbon steel in the test solution. It could be classified as mixed inhibitor. PWVA has a strong oxidizability. It could form an intact and compact film which consisted of Fe2O3 on carbon steel surface in the test solution. The passive film retarded Br− which corroded the metal matrix in the test solution. When the concentration of PWVA was 300 mg/L, it showed an excellent inhibition effect. However, when the temperature was higher than 173 °C, the corrosion rate of carbon steel in 55% LiBr + 0.07 mol/L LiOH solution increased rapidly. DEWEY : 620.1 ISSN : 0947-5117 En ligne : http://onlinelibrary.wiley.com/doi/10.1002/maco.200905528/abstract [article] Corrosion behaviors of carbon steel in 55% LiBr solution containing PWVA inhibitor [texte imprimé] / X. Q. Hu, Auteur ; C. H. Liang, Auteur ; X. N. Wu, Auteur . - 2011 . - pp. 444–448. Génie Mécanique Langues : Anglais (eng) in Materials and corrosion > Vol. 62 N° 5 (Mai 2011) . - pp. 444–448 Mots-clés : Corrosion  Corrosion  test  Inhibition  Inhibitor Index. décimale : 620.1 Essais des matériaux. Défauts des matériaux. Protection des matériaux Résumé : The inhibition performance of PWVA inhibitor on carbon steel was studied in 55% LiBr + 0.07 mol/L LiOH solution. Results indicated that PWVA inhibitor decreased both anodic and cathodic polarization current density and widened the passive potential region of carbon steel in the test solution. It could be classified as mixed inhibitor. PWVA has a strong oxidizability. It could form an intact and compact film which consisted of Fe2O3 on carbon steel surface in the test solution. The passive film retarded Br− which corroded the metal matrix in the test solution. When the concentration of PWVA was 300 mg/L, it showed an excellent inhibition effect. However, when the temperature was higher than 173 °C, the corrosion rate of carbon steel in 55% LiBr + 0.07 mol/L LiOH solution increased rapidly. DEWEY : 620.1 ISSN : 0947-5117 En ligne : http://onlinelibrary.wiley.com/doi/10.1002/maco.200905528/abstract

Partially substituting MgO for NaOH as the alkali source in the second-stage Impregnation of triploid poplar P-RC APMP / X. Q. Hu in Industrial & engineering chemistry research, Vol. 49 N° 7 (Avril 2010) 

Public ISBD [article]  in Industrial & engineering chemistry research > Vol. 49 N° 7 (Avril 2010) . - pp. 3088–3093 Titre : Partially substituting MgO for NaOH as the alkali source in the second-stage Impregnation of triploid poplar P-RC APMP Type de document : texte imprimé Auteurs : X. Q. Hu, Auteur ; W. Yuan, Auteur ; S. Y. Zhang, Auteur Année de publication : 2010 Article en page(s) : pp. 3088–3093 Note générale : Indystrial Chemistry Langues : Anglais (eng) Mots-clés : MgO  NaOH  Alkali  Triploid  Triplor Résumé : In the conventional preconditioning followed by refiner chemical treatment, alkaline peroxide mechanical pulping (P-RC APMP) process, sodium hydroxide (NaOH) is used as the alkali source. In this study, magnesium oxide (MgO) was used to partially substitute for NaOH as the alkali source (substitution ratio of up to 50%) in the second-stage impregnation of the triploid poplar P-RC APMP process. The changes in pH values of the residual bleaching liquor, yields, and chemical components of the treated wood chips in the second-stage impregnation and also the physical properties of the resultant P-RC APMP pulps with and without MgO substitution were investigated to explore the potential advantages of the process. The results showed that the partial MgO substitution for NaOH resulted in a lower pH of residual bleaching liquor and a higher treated wood chips yield than those of the NaOH-based process. In addition, the dissolution of benzene alcohol extractives, lignin, pentosans, and carbohydrates were all decreased. The resultantly yielded P-RC APMP pulp has a higher bulk, opacity, and light-scattering coefficient, but lower strength properties and a slightly lower brightness. ISSN : 0888-5885 En ligne : http://pubs.acs.org/doi/abs/10.1021/ie901639p [article] Partially substituting MgO for NaOH as the alkali source in the second-stage Impregnation of triploid poplar P-RC APMP [texte imprimé] / X. Q. Hu, Auteur ; W. Yuan, Auteur ; S. Y. Zhang, Auteur . - 2010 . - pp. 3088–3093. Indystrial Chemistry Langues : Anglais (eng) in Industrial & engineering chemistry research > Vol. 49 N° 7 (Avril 2010) . - pp. 3088–3093 Mots-clés : MgO  NaOH  Alkali  Triploid  Triplor Résumé : In the conventional preconditioning followed by refiner chemical treatment, alkaline peroxide mechanical pulping (P-RC APMP) process, sodium hydroxide (NaOH) is used as the alkali source. In this study, magnesium oxide (MgO) was used to partially substitute for NaOH as the alkali source (substitution ratio of up to 50%) in the second-stage impregnation of the triploid poplar P-RC APMP process. The changes in pH values of the residual bleaching liquor, yields, and chemical components of the treated wood chips in the second-stage impregnation and also the physical properties of the resultant P-RC APMP pulps with and without MgO substitution were investigated to explore the potential advantages of the process. The results showed that the partial MgO substitution for NaOH resulted in a lower pH of residual bleaching liquor and a higher treated wood chips yield than those of the NaOH-based process. In addition, the dissolution of benzene alcohol extractives, lignin, pentosans, and carbohydrates were all decreased. The resultantly yielded P-RC APMP pulp has a higher bulk, opacity, and light-scattering coefficient, but lower strength properties and a slightly lower brightness. ISSN : 0888-5885 En ligne : http://pubs.acs.org/doi/abs/10.1021/ie901639p