Documents disponibles écrits par cet auteur

La1–xKxCoO3 and LaCo1–yFeyO3 perovskite oxides / Feng Bin in Industrial & engineering chemistry research, Vol. 50 N° 11 (Juin 2011) 

Public ISBD [article]  in Industrial & engineering chemistry research > Vol. 50 N° 11 (Juin 2011) . - pp 6660–6667 Titre : La1–xKxCoO3 and LaCo1–yFeyO3 perovskite oxides : preparation, characterization, and catalytic performance in the simultaneous removal of NOx and diesel soot Type de document : texte imprimé Auteurs : Feng Bin, Auteur ; Chonglin Song, Auteur ; Gang Lv, Auteur Année de publication : 2011 Article en page(s) : pp 6660–6667 Note générale : Chimie industrielle Langues : Anglais (eng) Mots-clés : catalysts  Nitrogen  sorption  X-ray  diffraction Résumé : Perovskite-type La1–xKxCoO3 and LaCo1–yFeyO3 catalysts were prepared and characterized by nitrogen sorption, X-ray diffraction, scanning electron microscopy, transmission electron microscopy, energy-dispersive X-ray spectroscopy, and X-ray photoelectron spectroscopy. Catalytic activity for the simultaneous removal of NOx and soot was investigated using temperature-programmed reactions. For the La1–xKxCoO3 series, the introduction of K ions into the A-site caused the enhancement of Co valence state, which was beneficial to improving the catalytic activity. Excess K ions produced a Co3O4 phase adhering to the perovskite crystals, but the rhombohedral perovskite structure was well-maintained. In contrast, the B-site could be substituted by Fe ions with the doping ratio changing from null to 0.5, and no secondary phases were detected. With increasing K substitution, NOx conversion in the La1–xKxCoO3 series showed a declining trend after an initial ascent. The Co3O4 particles produced at high K content were responsible for this falling catalytic activity. For the LaCo1–yFeyO3 series, catalytic performances showed a monotonously decreasing trend as a function of Fe substitution. Among all of the perovskite oxides tested in this study, the La0.6K0.4CoO3 sample exhibited the highest catalytic activity for the simultaneous removal of NOx and soot. DEWEY : 660 ISSN : 0888-5885 En ligne : http://pubs.acs.org/doi/abs/10.1021/ie200196r [article] La1–xKxCoO3 and LaCo1–yFeyO3 perovskite oxides : preparation, characterization, and catalytic performance in the simultaneous removal of NOx and diesel soot [texte imprimé] / Feng Bin, Auteur ; Chonglin Song, Auteur ; Gang Lv, Auteur . - 2011 . - pp 6660–6667. Chimie industrielle Langues : Anglais (eng) in Industrial & engineering chemistry research > Vol. 50 N° 11 (Juin 2011) . - pp 6660–6667 Mots-clés : catalysts  Nitrogen  sorption  X-ray  diffraction Résumé : Perovskite-type La1–xKxCoO3 and LaCo1–yFeyO3 catalysts were prepared and characterized by nitrogen sorption, X-ray diffraction, scanning electron microscopy, transmission electron microscopy, energy-dispersive X-ray spectroscopy, and X-ray photoelectron spectroscopy. Catalytic activity for the simultaneous removal of NOx and soot was investigated using temperature-programmed reactions. For the La1–xKxCoO3 series, the introduction of K ions into the A-site caused the enhancement of Co valence state, which was beneficial to improving the catalytic activity. Excess K ions produced a Co3O4 phase adhering to the perovskite crystals, but the rhombohedral perovskite structure was well-maintained. In contrast, the B-site could be substituted by Fe ions with the doping ratio changing from null to 0.5, and no secondary phases were detected. With increasing K substitution, NOx conversion in the La1–xKxCoO3 series showed a declining trend after an initial ascent. The Co3O4 particles produced at high K content were responsible for this falling catalytic activity. For the LaCo1–yFeyO3 series, catalytic performances showed a monotonously decreasing trend as a function of Fe substitution. Among all of the perovskite oxides tested in this study, the La0.6K0.4CoO3 sample exhibited the highest catalytic activity for the simultaneous removal of NOx and soot. DEWEY : 660 ISSN : 0888-5885 En ligne : http://pubs.acs.org/doi/abs/10.1021/ie200196r

Measurement of effective fluid bulk modulus in hydraulic system / Yang Huayong in Transactions of the ASME . Journal of dynamic systems, measurement, and control, Vol. 133 N° 6 (Novembre 2011) 

Public ISBD [article]  in Transactions of the ASME . Journal of dynamic systems, measurement, and control > Vol. 133 N° 6 (Novembre 2011) . - 06 p. Titre : Measurement of effective fluid bulk modulus in hydraulic system Type de document : texte imprimé Auteurs : Yang Huayong, Auteur ; Feng Bin, Auteur ; Gong Guofang, Auteur Année de publication : 2012 Article en page(s) : 06 p. Note générale : Dynamic systems Langues : Anglais (eng) Mots-clés : Elasticity  Hydraulic  fluids  Hydraulic  systems Index. décimale : 553 Géologie économique. Minérographie. Minéraux. Formation et gisements de minerais Résumé : Effective fluid bulk modulus has significant influence on the stiffness and dynamic performance of hydraulic systems. It is always varied with different working parameters as air content, fluid pressure, and temperature. To estimating effective bulk modulus accurately is very important when designing high performance hydraulic systems. In this study, a measuring device was developed based on the definition of bulk modulus, and the measurement accuracy was estimated. Experiments were carried out using L-HM46 antiwear hydraulic fluid at approximately constant temperature, the results show that the good repeatability and pressure resolution can be achieved. Results also show that when pressure is low, the bulk modulus increases strongly as pressure increases; pressures over 8.5 MPa have slight influence on the bulk modulus. Effective fluid bulk modulus can be expressed as a function of working pressure when the air content is certain. DEWEY : 553 ISSN : 0022-0434 En ligne : http://asmedl.org/getabs/servlet/GetabsServlet?prog=normal&id=JDSMAA000133000006 [...] [article] Measurement of effective fluid bulk modulus in hydraulic system [texte imprimé] / Yang Huayong, Auteur ; Feng Bin, Auteur ; Gong Guofang, Auteur . - 2012 . - 06 p. Dynamic systems Langues : Anglais (eng) in Transactions of the ASME . Journal of dynamic systems, measurement, and control > Vol. 133 N° 6 (Novembre 2011) . - 06 p. Mots-clés : Elasticity  Hydraulic  fluids  Hydraulic  systems Index. décimale : 553 Géologie économique. Minérographie. Minéraux. Formation et gisements de minerais Résumé : Effective fluid bulk modulus has significant influence on the stiffness and dynamic performance of hydraulic systems. It is always varied with different working parameters as air content, fluid pressure, and temperature. To estimating effective bulk modulus accurately is very important when designing high performance hydraulic systems. In this study, a measuring device was developed based on the definition of bulk modulus, and the measurement accuracy was estimated. Experiments were carried out using L-HM46 antiwear hydraulic fluid at approximately constant temperature, the results show that the good repeatability and pressure resolution can be achieved. Results also show that when pressure is low, the bulk modulus increases strongly as pressure increases; pressures over 8.5 MPa have slight influence on the bulk modulus. Effective fluid bulk modulus can be expressed as a function of working pressure when the air content is certain. DEWEY : 553 ISSN : 0022-0434 En ligne : http://asmedl.org/getabs/servlet/GetabsServlet?prog=normal&id=JDSMAA000133000006 [...]