Documents disponibles écrits par cet auteur

Mathematical modeling of transport processes in funnel shaped mold of steel thin slab continuous caster / A. Hajari in Journal of heat transfer, Vol. 133 N° 6 (Juin 2011) 

Public ISBD [article]  in Journal of heat transfer > Vol. 133 N° 6 (Juin 2011) . - pp. [064503/1-5] Titre : Mathematical modeling of transport processes in funnel shaped mold of steel thin slab continuous caster Type de document : texte imprimé Auteurs : A. Hajari, Auteur ; S. H. Seyedein, Auteur ; M. R. Aboutalebi, Auteur Année de publication : 2011 Article en page(s) : pp. [064503/1-5] Note générale : Physique Langues : Anglais (eng) Mots-clés : Continuous  casting  Thin  slab  Modeling  Turbulent  flow  Heat  transfer  SEN Index. décimale : 536 Chaleur. Thermodynamique Résumé : In this work a three-dimensional fluid flow and heat transfer model was developed to predict the flow pattern and superheat dissipation in funnel shaped mold of a thin slab continuous caster with a novel tetrafurcated design for the submerged entry nozzle. Low Reynolds k−epsilon turbulent model was adopted to account for the turbulent effect. The transport equations were solved numerically using finite volume method. The results were compared with a full scale water model of the caster. Good agreement between mathematical and physical models was obtained. Parametric studies were carried out to evaluate the effect of casting speed, nozzle submergence depth, and inlet temperature on the superheat dissipation, flow pattern, and surface turbulence in the mold region. The results indicate a special flow pattern and heat distribution in the caster while using a tetrafurcated nozzle. Aiming to achieve more product capacity, in the case of casting with lower superheat temperature, a higher casting speed, together with higher submergence depth, is recommended in order to avoid surface turbulence and high heat flux across the narrow face. DEWEY : 536 ISSN : 0022-1481 En ligne : http://asmedl.aip.org/vsearch/servlet/VerityServlet?KEY=JHTRAO&ONLINE=YES&smode= [...] [article] Mathematical modeling of transport processes in funnel shaped mold of steel thin slab continuous caster [texte imprimé] / A. Hajari, Auteur ; S. H. Seyedein, Auteur ; M. R. Aboutalebi, Auteur . - 2011 . - pp. [064503/1-5]. Physique Langues : Anglais (eng) in Journal of heat transfer > Vol. 133 N° 6 (Juin 2011) . - pp. [064503/1-5] Mots-clés : Continuous  casting  Thin  slab  Modeling  Turbulent  flow  Heat  transfer  SEN Index. décimale : 536 Chaleur. Thermodynamique Résumé : In this work a three-dimensional fluid flow and heat transfer model was developed to predict the flow pattern and superheat dissipation in funnel shaped mold of a thin slab continuous caster with a novel tetrafurcated design for the submerged entry nozzle. Low Reynolds k−epsilon turbulent model was adopted to account for the turbulent effect. The transport equations were solved numerically using finite volume method. The results were compared with a full scale water model of the caster. Good agreement between mathematical and physical models was obtained. Parametric studies were carried out to evaluate the effect of casting speed, nozzle submergence depth, and inlet temperature on the superheat dissipation, flow pattern, and surface turbulence in the mold region. The results indicate a special flow pattern and heat distribution in the caster while using a tetrafurcated nozzle. Aiming to achieve more product capacity, in the case of casting with lower superheat temperature, a higher casting speed, together with higher submergence depth, is recommended in order to avoid surface turbulence and high heat flux across the narrow face. DEWEY : 536 ISSN : 0022-1481 En ligne : http://asmedl.aip.org/vsearch/servlet/VerityServlet?KEY=JHTRAO&ONLINE=YES&smode= [...]