Les Inscriptions à la Bibliothèque sont ouvertes en
ligne via le site: https://biblio.enp.edu.dz
Les Réinscriptions se font à :
• La Bibliothèque Annexe pour les étudiants en
2ème Année CPST
• La Bibliothèque Centrale pour les étudiants en Spécialités
A partir de cette page vous pouvez :
Retourner au premier écran avec les recherches... |
Détail de l'auteur
Auteur Oh, Byounggul
Documents disponibles écrits par cet auteur
Affiner la rechercheReal-time IMEP estimation and control using an in-cylinder pressure sensor for a common-rail direct injection diesel engine / Oh, Seungsuk in Transactions of the ASME . Journal of engineering for gas turbines and power, Vol. 133 N° 6 (Juin 2011)
[article]
in Transactions of the ASME . Journal of engineering for gas turbines and power > Vol. 133 N° 6 (Juin 2011) . - 09 p.
Titre : Real-time IMEP estimation and control using an in-cylinder pressure sensor for a common-rail direct injection diesel engine Type de document : texte imprimé Auteurs : Oh, Seungsuk, Auteur ; Junsoo Kim, Auteur ; Oh, Byounggul, Auteur Année de publication : 2011 Article en page(s) : 09 p. Note générale : Turbines à gaz Langues : Anglais (eng) Mots-clés : Cylinder pressure Indicated mean effective pressure (IMEP) estimation Difference pressure integral (DPI) Torque control Index. décimale : 620.1 Essais des matériaux. Défauts des matériaux. Protection des matériaux Résumé : An in-cylinder pressure-based control method is capable of improving engine performance, as well as reducing harmful emissions. However, this method is difficult to be implemented in a conventional engine management system due to the excessive data acquisition and long computation time. In this study, we propose a real-time indicated mean effective pressure (IMEP) estimation method using cylinder pressure in a common-rail direct injection diesel engine. In this method, difference pressure integral (DPI) was applied to the estimation. The DPI requires only 180 pressure data points during one engine cycle from top dead center to bottom dead center when pressure data are captured at every crank angle. Therefore, the IMEP can be estimated in real time. To further reduce the computational load, the IMEP was also estimated using DPI at 2 deg, 3 deg, and 4 deg crank angle resolutions. Furthermore, based on the estimated IMEP, we controlled IMEP using a radial basis function network and linear feedback controller. As a result of the study, successful estimation and control were demonstrated through engine experiments. DEWEY : 620.1 ISSN : 0742-4795 En ligne : http://asmedl.aip.org/getabs/servlet/GetabsServlet?prog=normal&id=JETPEZ00013300 [...] [article] Real-time IMEP estimation and control using an in-cylinder pressure sensor for a common-rail direct injection diesel engine [texte imprimé] / Oh, Seungsuk, Auteur ; Junsoo Kim, Auteur ; Oh, Byounggul, Auteur . - 2011 . - 09 p.
Turbines à gaz
Langues : Anglais (eng)
in Transactions of the ASME . Journal of engineering for gas turbines and power > Vol. 133 N° 6 (Juin 2011) . - 09 p.
Mots-clés : Cylinder pressure Indicated mean effective pressure (IMEP) estimation Difference pressure integral (DPI) Torque control Index. décimale : 620.1 Essais des matériaux. Défauts des matériaux. Protection des matériaux Résumé : An in-cylinder pressure-based control method is capable of improving engine performance, as well as reducing harmful emissions. However, this method is difficult to be implemented in a conventional engine management system due to the excessive data acquisition and long computation time. In this study, we propose a real-time indicated mean effective pressure (IMEP) estimation method using cylinder pressure in a common-rail direct injection diesel engine. In this method, difference pressure integral (DPI) was applied to the estimation. The DPI requires only 180 pressure data points during one engine cycle from top dead center to bottom dead center when pressure data are captured at every crank angle. Therefore, the IMEP can be estimated in real time. To further reduce the computational load, the IMEP was also estimated using DPI at 2 deg, 3 deg, and 4 deg crank angle resolutions. Furthermore, based on the estimated IMEP, we controlled IMEP using a radial basis function network and linear feedback controller. As a result of the study, successful estimation and control were demonstrated through engine experiments. DEWEY : 620.1 ISSN : 0742-4795 En ligne : http://asmedl.aip.org/getabs/servlet/GetabsServlet?prog=normal&id=JETPEZ00013300 [...]