Les Inscriptions à la Bibliothèque sont ouvertes en
ligne via le site: https://biblio.enp.edu.dz
Les Réinscriptions se font à :
• La Bibliothèque Annexe pour les étudiants en
2ème Année CPST
• La Bibliothèque Centrale pour les étudiants en Spécialités
A partir de cette page vous pouvez :
Retourner au premier écran avec les recherches... |
Détail de l'auteur
Auteur Richard C. Miake-Lye
Documents disponibles écrits par cet auteur
Affiner la rechercheMinimizing sampling loss in trace gas emission measurements for aircraft engines by using a chemical quick-quench probe / de la Rosa Blanco, Elena in Transactions of the ASME . Journal of engineering for gas turbines and power, Vol. 133 N° 7 (Juillet 2011)
[article]
in Transactions of the ASME . Journal of engineering for gas turbines and power > Vol. 133 N° 7 (Juillet 2011) . - 07 p.
Titre : Minimizing sampling loss in trace gas emission measurements for aircraft engines by using a chemical quick-quench probe Type de document : texte imprimé Auteurs : de la Rosa Blanco, Elena, Auteur ; Peck, Jay, Auteur ; Richard C. Miake-Lye, Auteur Année de publication : 2011 Article en page(s) : 07 p. Note générale : Turbines à gaz Langues : Anglais (eng) Mots-clés : Aerospace engines Air pollution control Air pollution measurement Losses Résumé : This paper describes the development and testing of a gas sampling probe that quenches chemical reactions by using supersonic expansion and helium dilution. Gas sampling probes are required for accurate measurement of exhaust emissions species, which is critical to determine the performance of an aircraft engine. The probe was designed through rounds of computational modeling and laboratory testing and was subsequently manufactured and then tested at the University of Tennessee Space Institute behind a General Electric J85 turbojet engine at different power settings: idle, maximum military, and afterburning. The experimental test results demonstrated that the chemical quick-quench (CQQ) probe suppressed the oxidation of carbon monoxide (CO) inside the probe system and preserved more CO at afterburning conditions. In addition, the CQQ probe prevented hydrocarbons from being partially oxidized to form CO at idle powers and measured higher hydrocarbons and lower CO emission compared with a conventional probe at that low power condition. The CQQ probe also suppressed nitrogen dioxide (NO2) to nitric oxide (NO) conversion through all engine power settings. These data strongly support the conclusion that the CQQ probe is able to quench unwanted chemical reactions inside the probe for all engine power levels. DEWEY : 620.1 ISSN : 0742-4795 En ligne : http://asmedl.aip.org/getabs/servlet/GetabsServlet?prog=normal&id=JETPEZ00013300 [...] [article] Minimizing sampling loss in trace gas emission measurements for aircraft engines by using a chemical quick-quench probe [texte imprimé] / de la Rosa Blanco, Elena, Auteur ; Peck, Jay, Auteur ; Richard C. Miake-Lye, Auteur . - 2011 . - 07 p.
Turbines à gaz
Langues : Anglais (eng)
in Transactions of the ASME . Journal of engineering for gas turbines and power > Vol. 133 N° 7 (Juillet 2011) . - 07 p.
Mots-clés : Aerospace engines Air pollution control Air pollution measurement Losses Résumé : This paper describes the development and testing of a gas sampling probe that quenches chemical reactions by using supersonic expansion and helium dilution. Gas sampling probes are required for accurate measurement of exhaust emissions species, which is critical to determine the performance of an aircraft engine. The probe was designed through rounds of computational modeling and laboratory testing and was subsequently manufactured and then tested at the University of Tennessee Space Institute behind a General Electric J85 turbojet engine at different power settings: idle, maximum military, and afterburning. The experimental test results demonstrated that the chemical quick-quench (CQQ) probe suppressed the oxidation of carbon monoxide (CO) inside the probe system and preserved more CO at afterburning conditions. In addition, the CQQ probe prevented hydrocarbons from being partially oxidized to form CO at idle powers and measured higher hydrocarbons and lower CO emission compared with a conventional probe at that low power condition. The CQQ probe also suppressed nitrogen dioxide (NO2) to nitric oxide (NO) conversion through all engine power settings. These data strongly support the conclusion that the CQQ probe is able to quench unwanted chemical reactions inside the probe for all engine power levels. DEWEY : 620.1 ISSN : 0742-4795 En ligne : http://asmedl.aip.org/getabs/servlet/GetabsServlet?prog=normal&id=JETPEZ00013300 [...]