In-situ desaturation test by air injection and its evaluation through field monitoring and multiphase flow simulation / Mitsu Okamura in Journal of geotechnical and geoenvironmental engineering, Vol. 137 N° 7 (Juillet 2011)  

Public ISBD [article]  inJournal of geotechnical and geoenvironmental engineering > Vol. 137 N° 7 (Juillet 2011) . - pp. 643-652 Titre : In-situ desaturation test by air injection and its evaluation through field monitoring and multiphase flow simulation Type de document : texte imprimé Auteurs : Mitsu Okamura, Auteur ; Masaya Takebayashi, Auteur ; Katsuji Nishida, Auteur Année de publication : 2011 Article en page(s) : pp. 643-652 Note générale : Géotechnique Langues : Anglais (eng) Mots-clés : Degree of saturation Desaturation Electric resistivity Tomography Numerical simulation Liquefaction resistance Index. décimale : 624.1 Infrastructures.Ouvrages en terre. Fondations. Tunnels Résumé : Desaturation of ground by air injection attracts considerable attention in recent years as an innovative technique for a liquefaction countermeasure. Several research programs were conducted in laboratories regarding the related topics. This paper describes an in situ air-injection test that aims to examine the effectiveness of the air injection to desaturate ground and the validity of observation techniques to monitor the evolution of the unsaturated zone. In the test, air was injected from an air injector deployed in a targeted saturated-sand layer at a depth of 6 m. Observations revealed that the air-flow rate increased linearly with increasing air-injection pressure and the desaturated zone was generated within 4 m from the injection point. A 3-dimensional electric resistivity tomography technique was effective for evaluation of the desaturated zone. The degree of saturation of the in situ soil was observed by using high quality undisturbed samples obtained by the ground freezing method. The degree of saturation ranged from 68–98%, which was low enough to almost double the liquefaction resistance of the soil at the site. Numerical analyses were also conducted with a gas-liquid two-phase flow simulator to describe the evolution of the soil desaturation. Qualitatively, predictions show a relatively good agreement with the in situ measurements of the 3D electric resistivity tomography and are quantitatively compatible with the in-field degree of saturation measured indirectly by using the frozen soil samples. Actual liquefaction resistance was evaluated utilizing the undisturbed samples by conducting a triaxial test under cyclic shear conditions, which revealed that desaturated samples were indeed less susceptible to liquefaction compared with the fully saturated samples. DEWEY : 624.1 ISSN : 1090-0241 En ligne : http://ascelibrary.org/gto/resource/1/jggefk/v137/i7/p643_s1?isAuthorized=no [article] In-situ desaturation test by air injection and its evaluation through field monitoring and multiphase flow simulation [texte imprimé] / Mitsu Okamura, Auteur ; Masaya Takebayashi, Auteur ; Katsuji Nishida, Auteur . - 2011 . - pp. 643-652. Géotechnique Langues : Anglais (eng) in Journal of geotechnical and geoenvironmental engineering > Vol. 137 N° 7 (Juillet 2011) . - pp. 643-652 Mots-clés : Degree of saturation Desaturation Electric resistivity Tomography Numerical simulation Liquefaction resistance Index. décimale : 624.1 Infrastructures.Ouvrages en terre. Fondations. Tunnels Résumé : Desaturation of ground by air injection attracts considerable attention in recent years as an innovative technique for a liquefaction countermeasure. Several research programs were conducted in laboratories regarding the related topics. This paper describes an in situ air-injection test that aims to examine the effectiveness of the air injection to desaturate ground and the validity of observation techniques to monitor the evolution of the unsaturated zone. In the test, air was injected from an air injector deployed in a targeted saturated-sand layer at a depth of 6 m. Observations revealed that the air-flow rate increased linearly with increasing air-injection pressure and the desaturated zone was generated within 4 m from the injection point. A 3-dimensional electric resistivity tomography technique was effective for evaluation of the desaturated zone. The degree of saturation of the in situ soil was observed by using high quality undisturbed samples obtained by the ground freezing method. The degree of saturation ranged from 68–98%, which was low enough to almost double the liquefaction resistance of the soil at the site. Numerical analyses were also conducted with a gas-liquid two-phase flow simulator to describe the evolution of the soil desaturation. Qualitatively, predictions show a relatively good agreement with the in situ measurements of the 3D electric resistivity tomography and are quantitatively compatible with the in-field degree of saturation measured indirectly by using the frozen soil samples. Actual liquefaction resistance was evaluated utilizing the undisturbed samples by conducting a triaxial test under cyclic shear conditions, which revealed that desaturated samples were indeed less susceptible to liquefaction compared with the fully saturated samples. DEWEY : 624.1 ISSN : 1090-0241 En ligne : http://ascelibrary.org/gto/resource/1/jggefk/v137/i7/p643_s1?isAuthorized=no

Exemplaires

Code-barres	Cote	Support	Localisation	Section	Disponibilité
aucun exemplaire