Behavior of cold bend pipes under bending loads / M. Sen in Journal of structural engineering, Vol. 137 N° 5 (Mai 2011)  

Public ISBD [article]  inJournal of structural engineering > Vol. 137 N° 5 (Mai 2011) . - pp. 571-578 Titre : Behavior of cold bend pipes under bending loads Type de document : texte imprimé Auteurs : M. Sen, Auteur ; Cheng, J. J. R., Auteur ; J. Zhou, Auteur Année de publication : 2011 Article en page(s) : pp. 571-578 Note générale : Génie Civil Langues : Anglais (eng) Mots-clés : Pipe Cold bend Bending Buckle Strain Imperfection Index. décimale : 624 Constructions du génie civil et du bâtiment. Infrastructures. Ouvrages en terres. Fondations. Tunnels. Ponts et charpentes Résumé : Ground movement along a buried pipeline often places the line in net compression. The local buckling resistance at cold bends is less than at straight sections, and hence, local buckling tends to occur at bends. Correspondingly, this full-scale testing program was conducted to investigate the local and global load-deformation relationships for seven cold bend pipes under applied loads. The specimens were loaded under bending, axial load, and internal pressure until local buckling occurred, and their curvatures were subsequently increased to establish their postbuckling behaviors. It was demonstrated though these tests that the buckling strain of the cold bend pipes was considerably lower than a straight pipe and that the presence of internal pressure exhibited a predominant role on the specimens load-deformation behaviors. It was also established that the behavior of the specimens was relatively unaffected by the bending methods that were employed during cold bending. DEWEY : 624 ISSN : 0733-9445 En ligne : http://ascelibrary.org/sto/resource/1/jsendh/v137/i5/p571_s1?isAuthorized=no [article] Behavior of cold bend pipes under bending loads [texte imprimé] / M. Sen, Auteur ; Cheng, J. J. R., Auteur ; J. Zhou, Auteur . - 2011 . - pp. 571-578. Génie Civil Langues : Anglais (eng) in Journal of structural engineering > Vol. 137 N° 5 (Mai 2011) . - pp. 571-578 Mots-clés : Pipe Cold bend Bending Buckle Strain Imperfection Index. décimale : 624 Constructions du génie civil et du bâtiment. Infrastructures. Ouvrages en terres. Fondations. Tunnels. Ponts et charpentes Résumé : Ground movement along a buried pipeline often places the line in net compression. The local buckling resistance at cold bends is less than at straight sections, and hence, local buckling tends to occur at bends. Correspondingly, this full-scale testing program was conducted to investigate the local and global load-deformation relationships for seven cold bend pipes under applied loads. The specimens were loaded under bending, axial load, and internal pressure until local buckling occurred, and their curvatures were subsequently increased to establish their postbuckling behaviors. It was demonstrated though these tests that the buckling strain of the cold bend pipes was considerably lower than a straight pipe and that the presence of internal pressure exhibited a predominant role on the specimens load-deformation behaviors. It was also established that the behavior of the specimens was relatively unaffected by the bending methods that were employed during cold bending. DEWEY : 624 ISSN : 0733-9445 En ligne : http://ascelibrary.org/sto/resource/1/jsendh/v137/i5/p571_s1?isAuthorized=no

Exemplaires

Code-barres	Cote	Support	Localisation	Section	Disponibilité
aucun exemplaire