Microfluidic extraction of docosahexaenoic acid ethyl ester / Eiji Kamio in Industrial & engineering chemistry research, Vol. 50 N° 11 (Juin 2011)  

Public ISBD [article]  inIndustrial & engineering chemistry research > Vol. 50 N° 11 (Juin 2011) . - pp. 6915-6924 Titre : Microfluidic extraction of docosahexaenoic acid ethyl ester : comparison between slug flow and emulsion Type de document : texte imprimé Auteurs : Eiji Kamio, Auteur ; Yu Seike, Auteur ; Hidekazu Yoshizawa, Auteur Année de publication : 2011 Article en page(s) : pp. 6915-6924 Note générale : Chimie industrielle Langues : Anglais (eng) Mots-clés : Fluid mechanics Emulsion Slug flow Microfluidics Résumé : Microfluidic liquid―liquid extraction of the ethyl ester of docosahexaenoic acid (DHA-Et) with silver ions was investigated using slug flow and a water-in-oil (W/O) emulsion as specific flow patterns possessing large interfacial areas. To compare the extraction rates of both systems, slug flow and a W/O emulsion with similar specific interfacial areas were prepared. Extraction rates for the systems were the same at 298 K. However, at 268 K, slug flow had a faster extraction rate than the W/O emulsion. Theoretical calculation follows the results for both systems at 298 K and for the slug flow system at 268 K, suggesting that the emulsion stabilizer inhibits complex formation between DHA-Et and silver ions at the O/W interface. A reduction in extraction rate was observed in the slug flow system at 268 K when the emulsion stabilizer was used. Slug flow can be prepared without stabilizer, offering advantages over emulsions in microfluidic extraction. DEWEY : 660 ISSN : 0888-5885 En ligne : http://cat.inist.fr/?aModele=afficheN&cpsidt=24199909 [article] Microfluidic extraction of docosahexaenoic acid ethyl ester : comparison between slug flow and emulsion [texte imprimé] / Eiji Kamio, Auteur ; Yu Seike, Auteur ; Hidekazu Yoshizawa, Auteur . - 2011 . - pp. 6915-6924. Chimie industrielle Langues : Anglais (eng) in Industrial & engineering chemistry research > Vol. 50 N° 11 (Juin 2011) . - pp. 6915-6924 Mots-clés : Fluid mechanics Emulsion Slug flow Microfluidics Résumé : Microfluidic liquid―liquid extraction of the ethyl ester of docosahexaenoic acid (DHA-Et) with silver ions was investigated using slug flow and a water-in-oil (W/O) emulsion as specific flow patterns possessing large interfacial areas. To compare the extraction rates of both systems, slug flow and a W/O emulsion with similar specific interfacial areas were prepared. Extraction rates for the systems were the same at 298 K. However, at 268 K, slug flow had a faster extraction rate than the W/O emulsion. Theoretical calculation follows the results for both systems at 298 K and for the slug flow system at 268 K, suggesting that the emulsion stabilizer inhibits complex formation between DHA-Et and silver ions at the O/W interface. A reduction in extraction rate was observed in the slug flow system at 268 K when the emulsion stabilizer was used. Slug flow can be prepared without stabilizer, offering advantages over emulsions in microfluidic extraction. DEWEY : 660 ISSN : 0888-5885 En ligne : http://cat.inist.fr/?aModele=afficheN&cpsidt=24199909

Exemplaires

Code-barres	Cote	Support	Localisation	Section	Disponibilité
aucun exemplaire