Documents disponibles écrits par cet auteur

Pressure drop and heat transfer characteristics of clathrate hydrate slurry in a plate heat exchanger / Z.W. Ma in International journal of refrigeration, Vol. 34 N° 3 (Mai 2011) 

Public ISBD [article]  in International journal of refrigeration > Vol. 34 N° 3 (Mai 2011) . - pp. 796-806 Titre : Pressure drop and heat transfer characteristics of clathrate hydrate slurry in a plate heat exchanger Titre original : Chute de pression et caractéristiques du transfert de chaleur d'un coulis d'hydrate de clathrate dans un échangeur de chaleur à plaques Type de document : texte imprimé Auteurs : Z.W. Ma, Auteur ; P. Zhang, Auteur Année de publication : 2011 Article en page(s) : pp. 796-806 Note générale : Génie Mécanique Langues : Anglais (eng) Mots-clés : Heat  exchanger  Pressure  drop  Heat  transfer  Slurry  Clathrate  Hydrate  Tetrabutylammonium  bromide Index. décimale : 621.5 Energie pneumatique. Machinerie et outils. Réfrigération Résumé : Pressure drop and heat transfer characteristics of 0–17.5 vol% tetrabutylammonium bromide (TBAB) clathrate hydrate slurry (CHS) as a secondary refrigerant flowing through a plate heat exchanger (PHE) were investigated in the present research. It was found that the pressure drop of TBAB CHS was about 3.0–50.0 kPa which was about 1.2–2 times of that of the chilled water at the flow rate of 2.5–13.0 L min−1. The pressure drop increased with the increase of the volume fraction. Variation of the pressure drop with the modified Reynolds number was discussed and compared with that of the ice slurry. Flow friction factor correlation and local heat transfer correlation for TBAB CHS flowing through PHE were both proposed based on the experimental data. In addition, the influential factors, such as the inlet water temperature and inlet CHS volume fraction, on the overall heat transfer coefficient were discussed. DEWEY : 621.5 ISSN : 0140-7007 En ligne : http://www.sciencedirect.com/science/article/pii/S0140700710002975 [article] Pressure drop and heat transfer characteristics of clathrate hydrate slurry in a plate heat exchanger = Chute de pression et caractéristiques du transfert de chaleur d'un coulis d'hydrate de clathrate dans un échangeur de chaleur à plaques [texte imprimé] / Z.W. Ma, Auteur ; P. Zhang, Auteur . - 2011 . - pp. 796-806. Génie Mécanique Langues : Anglais (eng) in International journal of refrigeration > Vol. 34 N° 3 (Mai 2011) . - pp. 796-806 Mots-clés : Heat  exchanger  Pressure  drop  Heat  transfer  Slurry  Clathrate  Hydrate  Tetrabutylammonium  bromide Index. décimale : 621.5 Energie pneumatique. Machinerie et outils. Réfrigération Résumé : Pressure drop and heat transfer characteristics of 0–17.5 vol% tetrabutylammonium bromide (TBAB) clathrate hydrate slurry (CHS) as a secondary refrigerant flowing through a plate heat exchanger (PHE) were investigated in the present research. It was found that the pressure drop of TBAB CHS was about 3.0–50.0 kPa which was about 1.2–2 times of that of the chilled water at the flow rate of 2.5–13.0 L min−1. The pressure drop increased with the increase of the volume fraction. Variation of the pressure drop with the modified Reynolds number was discussed and compared with that of the ice slurry. Flow friction factor correlation and local heat transfer correlation for TBAB CHS flowing through PHE were both proposed based on the experimental data. In addition, the influential factors, such as the inlet water temperature and inlet CHS volume fraction, on the overall heat transfer coefficient were discussed. DEWEY : 621.5 ISSN : 0140-7007 En ligne : http://www.sciencedirect.com/science/article/pii/S0140700710002975

Solid fraction determination in cold storage by tetra-n-butyl ammonium bromide clathrate hydrate slurry / P. Zhang in International journal of refrigeration, Vol. 36 N° 3 (Mai 2013) 

Public ISBD [article]  in International journal of refrigeration > Vol. 36 N° 3 (Mai 2013) . - pp. 809–819 Titre : Solid fraction determination in cold storage by tetra-n-butyl ammonium bromide clathrate hydrate slurry Titre original : Détermination de la fraction solide lors de l'accumulation thermique à l'aide d'un coulis de clathrate d'hydrate au bromure de tétra-n-butylammonium Type de document : texte imprimé Auteurs : P. Zhang, Auteur ; X. J. Shi, Auteur ; Z.W. Ma, Auteur Année de publication : 2013 Article en page(s) : pp. 809–819 Note générale : Refrigeration Langues : Anglais (eng) Mots-clés : Cold  storage;  Solid  fraction  distribution;  TBAB  clathrate  hydrate  slurry;  Crystal  particle;  Non-Newtonian  fluid Résumé : Thermal or cold storage by phase change material slurry attracted many attentions in recent years, in which solid fraction distribution in the storage tank is an important issue due to different densities of the solid particle and carrier fluid. Tetra-n-butyl ammonium bromide (TBAB) clathrate hydrate slurry (CHS) has recently been intensively investigated for the purpose of the cold storage. In the present study, solid fraction distribution of TBAB CHS in a cold storage tank was both experimentally and numerically investigated. The different sedimentation characteristics of type A and type B TBAB CHS were identified. It was shown that high-capacity cold storage can be achieved by taking advantage of the sedimentation of type A TBAB CHS, based on which a procedure to realize it was also proposed. En ligne : http://www.sciencedirect.com/science/article/pii/S0140700712003118 [article] Solid fraction determination in cold storage by tetra-n-butyl ammonium bromide clathrate hydrate slurry = Détermination de la fraction solide lors de l'accumulation thermique à l'aide d'un coulis de clathrate d'hydrate au bromure de tétra-n-butylammonium [texte imprimé] / P. Zhang, Auteur ; X. J. Shi, Auteur ; Z.W. Ma, Auteur . - 2013 . - pp. 809–819. Refrigeration Langues : Anglais (eng) in International journal of refrigeration > Vol. 36 N° 3 (Mai 2013) . - pp. 809–819 Mots-clés : Cold  storage;  Solid  fraction  distribution;  TBAB  clathrate  hydrate  slurry;  Crystal  particle;  Non-Newtonian  fluid Résumé : Thermal or cold storage by phase change material slurry attracted many attentions in recent years, in which solid fraction distribution in the storage tank is an important issue due to different densities of the solid particle and carrier fluid. Tetra-n-butyl ammonium bromide (TBAB) clathrate hydrate slurry (CHS) has recently been intensively investigated for the purpose of the cold storage. In the present study, solid fraction distribution of TBAB CHS in a cold storage tank was both experimentally and numerically investigated. The different sedimentation characteristics of type A and type B TBAB CHS were identified. It was shown that high-capacity cold storage can be achieved by taking advantage of the sedimentation of type A TBAB CHS, based on which a procedure to realize it was also proposed. En ligne : http://www.sciencedirect.com/science/article/pii/S0140700712003118