Documents disponibles écrits par cet auteur

CO2 absorption into mixed aqueous solutions of 2-amino-2-hydroxymethyl-1,3-propanediol and piperazine / Francis Bougie in Industrial & engineering chemistry research, Vol. 49 N° 3 (Fevrier 2010) 

Public ISBD [article]  in Industrial & engineering chemistry research > Vol. 49 N° 3 (Fevrier 2010) . - pp. 1150–1159 Titre : CO2 absorption into mixed aqueous solutions of 2-amino-2-hydroxymethyl-1,3-propanediol and piperazine Type de document : texte imprimé Auteurs : Francis Bougie, Auteur ; Maria C. Iliuta, Auteur Année de publication : 2010 Article en page(s) : pp. 1150–1159 Note générale : Industrial chemistry Langues : Anglais (eng) Mots-clés : CO2--absorption--mixed  aqueous--solutions--2-amino-2-hydroxymethyl-1,3-propanediol--piperazine Résumé : Solubility data of CO2 in aqueous mixtures of 2-amino-2-hydroxymethyl-1,3-propanediol (AHPD) and piperazine (Pz) were measured over a range of temperature from 288.15 to 333.15 K and for total amine concentrations up to 3.1 kmol·m−3. The CO2 partial pressure was kept within 0.21−2 637 kPa using a vapor−liquid equilibrium (VLE) apparatus based on a static-analytic method. The solubility of N2O in the Pz−AHPD aqueous solutions was also performed in order to determine, with the N2O analogy, the Henry’s law constant of CO2 in these solutions. The experimental data for the ternary system AHPD−CO2−H2O were correlated using a modified Pitzer’s thermodynamic model for the activity coefficients combined with the virial equation of state for representing the fugacity coefficients. The solubility of carbon dioxide in aqueous solutions of mixed amine (Pz + AHPD) was predicted by supposing that the parameters characterizing the single amine systems are essential for describing the quaternary system behavior. Note de contenu : Bibiogr. ISSN : 0888-5885 En ligne : http://pubs.acs.org/doi/abs/10.1021/ie900705y [article] CO2 absorption into mixed aqueous solutions of 2-amino-2-hydroxymethyl-1,3-propanediol and piperazine [texte imprimé] / Francis Bougie, Auteur ; Maria C. Iliuta, Auteur . - 2010 . - pp. 1150–1159. Industrial chemistry Langues : Anglais (eng) in Industrial & engineering chemistry research > Vol. 49 N° 3 (Fevrier 2010) . - pp. 1150–1159 Mots-clés : CO2--absorption--mixed  aqueous--solutions--2-amino-2-hydroxymethyl-1,3-propanediol--piperazine Résumé : Solubility data of CO2 in aqueous mixtures of 2-amino-2-hydroxymethyl-1,3-propanediol (AHPD) and piperazine (Pz) were measured over a range of temperature from 288.15 to 333.15 K and for total amine concentrations up to 3.1 kmol·m−3. The CO2 partial pressure was kept within 0.21−2 637 kPa using a vapor−liquid equilibrium (VLE) apparatus based on a static-analytic method. The solubility of N2O in the Pz−AHPD aqueous solutions was also performed in order to determine, with the N2O analogy, the Henry’s law constant of CO2 in these solutions. The experimental data for the ternary system AHPD−CO2−H2O were correlated using a modified Pitzer’s thermodynamic model for the activity coefficients combined with the virial equation of state for representing the fugacity coefficients. The solubility of carbon dioxide in aqueous solutions of mixed amine (Pz + AHPD) was predicted by supposing that the parameters characterizing the single amine systems are essential for describing the quaternary system behavior. Note de contenu : Bibiogr. ISSN : 0888-5885 En ligne : http://pubs.acs.org/doi/abs/10.1021/ie900705y

Development of zirconium - stabilized calcium oxide absorbent for cyclic high - temperature CO2 capture / Hamid R. Radfarnia in Industrial & engineering chemistry research, Vol.51 N° 31 (Août 2012) 

Public ISBD [article]  in Industrial & engineering chemistry research > Vol.51 N° 31 (Août 2012) . - pp. 10390–10398 Titre : Development of zirconium - stabilized calcium oxide absorbent for cyclic high - temperature CO2 capture Type de document : texte imprimé Auteurs : Hamid R. Radfarnia, Auteur ; Maria C. Iliuta, Auteur Année de publication : 2012 Article en page(s) : pp. 10390–10398 Note générale : Industrial chemistry Langues : Anglais (eng) Mots-clés : Zirconium  Calcium  Oxide  Absorbent Résumé : A high-temperature regenerable CO2 absorbent, Zr-stabilized CaO, was prepared using the surfactant template-ultrasound synthesis method in this work. During 15 absorption/desorption cycles, it was found that Zr-stabilized CaO with a Zr/Ca molar ratio of 0.303 kept the most favorable stability and CO2 uptake capacity among the proposed Zr-stabilized samples. During multiple carbonation/decarbonation cycles, the incorporation of zirconium inhibited the agglomeration and sintering of CaO particles, thereby improving the absorbent durability. The effects of carbonation temperature (600–700 °C) and surfactant amount used in the preparation method on the performance of the proposed absorbent were investigated. The results showed that an excess of surfactant negatively affects the absorbent structural stability. Multicycle CO2 capture tests carried out between 600 and 700 °C showed that an increase in carbonation temperature improved the absorption capacity and durability of the proposed Zr-stabilized CaO absorbent. In summary, the results showed a superior prolonged stability of Zr-stabilized CaO as compared to pure CaO under severe operating conditions. ISSN : 0888-5885 En ligne : http://pubs.acs.org/doi/abs/10.1021/ie301287k [article] Development of zirconium - stabilized calcium oxide absorbent for cyclic high - temperature CO2 capture [texte imprimé] / Hamid R. Radfarnia, Auteur ; Maria C. Iliuta, Auteur . - 2012 . - pp. 10390–10398. Industrial chemistry Langues : Anglais (eng) in Industrial & engineering chemistry research > Vol.51 N° 31 (Août 2012) . - pp. 10390–10398 Mots-clés : Zirconium  Calcium  Oxide  Absorbent Résumé : A high-temperature regenerable CO2 absorbent, Zr-stabilized CaO, was prepared using the surfactant template-ultrasound synthesis method in this work. During 15 absorption/desorption cycles, it was found that Zr-stabilized CaO with a Zr/Ca molar ratio of 0.303 kept the most favorable stability and CO2 uptake capacity among the proposed Zr-stabilized samples. During multiple carbonation/decarbonation cycles, the incorporation of zirconium inhibited the agglomeration and sintering of CaO particles, thereby improving the absorbent durability. The effects of carbonation temperature (600–700 °C) and surfactant amount used in the preparation method on the performance of the proposed absorbent were investigated. The results showed that an excess of surfactant negatively affects the absorbent structural stability. Multicycle CO2 capture tests carried out between 600 and 700 °C showed that an increase in carbonation temperature improved the absorption capacity and durability of the proposed Zr-stabilized CaO absorbent. In summary, the results showed a superior prolonged stability of Zr-stabilized CaO as compared to pure CaO under severe operating conditions. ISSN : 0888-5885 En ligne : http://pubs.acs.org/doi/abs/10.1021/ie301287k

Surfactant-template/ultrasound-assisted method for the preparation of porous nanoparticle lithium zirconate / Hamid R. Radfarnia in Industrial & engineering chemistry research, Vol. 50 N° 15 (Août 2011) 

Public ISBD [article]  in Industrial & engineering chemistry research > Vol. 50 N° 15 (Août 2011) . - pp. 9295-9305 Titre : Surfactant-template/ultrasound-assisted method for the preparation of porous nanoparticle lithium zirconate Type de document : texte imprimé Auteurs : Hamid R. Radfarnia, Auteur ; Maria C. Iliuta, Auteur Année de publication : 2011 Article en page(s) : pp. 9295-9305 Note générale : Chimie industrielle Langues : Anglais (eng) Mots-clés : Nanoparticle  Preparation  Ultrasound  Surfactant Résumé : Porous nanoparticle lithium zirconate (Li2ZrO3) was prepared using an ultrasound-assisted surfactant-template method in the liquid-state reaction. The CO2 adsorption performance of the prepared materials was tested under various conditions and compared with that of Li2ZrO3 prepared by the simple surfactant-template method (porous, without sonication) and the conventional soft-chemistry route. The results indicated a better adsorption rate and capacity of porous nanopowders, whether assisted with ultrasound or not, in comparison with the traditional sample. This behavior is mainly due to a less aggregated powder structure and porous framework, facilitating gas and ion diffusion to and from the particle layers. However, the porous adsorbent prepared without sonication exhibited instability during cyclic operation, limiting its application for long-time use. Sonication time and surfactant concentration were found to be key parameters for controlling the crystallite size and the BET surface area. The porous Li2ZrO3 sample prepared with less surfactant and a shorter irradiation time (sample A) had the most favorable sorption kinetics and capacity among all studied samples. The maximum uptake capacity of 22 wt % for sample A compared to 15.2 wt % for the conventional sample (sample J, fabricated by the soft-chemistry method), obtained under a 100% CO2 stream, suggested a noticeable improvement in sorption behavior of the proposed adsorbents compared with traditional Li2ZrO3. Moreover, the adequate cyclic stability of porous powders prepared by sonication identify these materials as promising CO2 acceptors, particularly for integrated sorbent/catalyst systems such as that used for sorption-enhanced steam methane reforming (SESMR). CO2 adsorption experimental data for sample A were successfully modeled at various CO2 partial pressures using a double-exponential equation. DEWEY : 660 ISSN : 0888-5885 En ligne : http://cat.inist.fr/?aModele=afficheN&cpsidt=24395874 [article] Surfactant-template/ultrasound-assisted method for the preparation of porous nanoparticle lithium zirconate [texte imprimé] / Hamid R. Radfarnia, Auteur ; Maria C. Iliuta, Auteur . - 2011 . - pp. 9295-9305. Chimie industrielle Langues : Anglais (eng) in Industrial & engineering chemistry research > Vol. 50 N° 15 (Août 2011) . - pp. 9295-9305 Mots-clés : Nanoparticle  Preparation  Ultrasound  Surfactant Résumé : Porous nanoparticle lithium zirconate (Li2ZrO3) was prepared using an ultrasound-assisted surfactant-template method in the liquid-state reaction. The CO2 adsorption performance of the prepared materials was tested under various conditions and compared with that of Li2ZrO3 prepared by the simple surfactant-template method (porous, without sonication) and the conventional soft-chemistry route. The results indicated a better adsorption rate and capacity of porous nanopowders, whether assisted with ultrasound or not, in comparison with the traditional sample. This behavior is mainly due to a less aggregated powder structure and porous framework, facilitating gas and ion diffusion to and from the particle layers. However, the porous adsorbent prepared without sonication exhibited instability during cyclic operation, limiting its application for long-time use. Sonication time and surfactant concentration were found to be key parameters for controlling the crystallite size and the BET surface area. The porous Li2ZrO3 sample prepared with less surfactant and a shorter irradiation time (sample A) had the most favorable sorption kinetics and capacity among all studied samples. The maximum uptake capacity of 22 wt % for sample A compared to 15.2 wt % for the conventional sample (sample J, fabricated by the soft-chemistry method), obtained under a 100% CO2 stream, suggested a noticeable improvement in sorption behavior of the proposed adsorbents compared with traditional Li2ZrO3. Moreover, the adequate cyclic stability of porous powders prepared by sonication identify these materials as promising CO2 acceptors, particularly for integrated sorbent/catalyst systems such as that used for sorption-enhanced steam methane reforming (SESMR). CO2 adsorption experimental data for sample A were successfully modeled at various CO2 partial pressures using a double-exponential equation. DEWEY : 660 ISSN : 0888-5885 En ligne : http://cat.inist.fr/?aModele=afficheN&cpsidt=24395874