| Titre : | Dynamic centrifuge testing of slickensided shear surfaces (2008) |
| Auteurs : | Christopher L. Meehan, Auteur ; Ross W. Boulanger, Auteur ; J. Michael Duncan, Auteur |
| Type de document : | Article : texte imprimé |
| Dans : | Journal of geotechnical and geoenvironmental engineering (Vol. 134 n°8, Août 2008) |
| Article en page(s) : | pp. 1086–1096 |
| Note générale : | Geotechnical and geotechnical engineering |
| Langues : | Anglais |
| Tags : | Dynamic stability Clays Residual strength Slope Earthquakes Soil deformation Shear Overconsolidated soils Centrifuge |
| Résumé : | Movement along preexisting slickensided rupture surfaces in overconsolidated clay and clay shale slopes can represent a critical sliding mechanism during earthquakes. The seismic behavior of preexisting slickensided surfaces in overconsolidated clay was examined by performing dynamic centrifuge model tests of two slickensided sliding block models constructed using Rancho Solano lean clay. Dynamic shear displacements were concentrated along the preformed slickensided surfaces. The peak shear resistances mobilized along the slickensided surfaces during dynamic loading were 90–120% higher than the drained residual strength measured prior to shaking. To accurately predict the displacements of the sliding blocks using Newmark’s method, it was necessary to use dynamic strengths that were 37–64% larger than the drained residual strength of the soil. Dynamic loading caused a positive pore pressure response in the soil surrounding the slickensided planes. The postshaking shear strengths were 17–31% higher than those measured prior to shaking. |
| En ligne : | http://ascelibrary.org/doi/abs/10.1061/%28ASCE%291090-0241%282008%29134%3A8%281086%29 |
