Self-organizing fuzzy controller for gas-assisted injection molding combination systems / Jeen Lin in IEEE Transactions on control systems technology, Vol. 18 N° 6 (Novembre 2010)  

Public ISBD [article]  inIEEE Transactions on control systems technology > Vol. 18 N° 6 (Novembre 2010) . - pp. 1413-1421 Titre : Self-organizing fuzzy controller for gas-assisted injection molding combination systems Type de document : texte imprimé Auteurs : Jeen Lin, Auteur ; Ruey-Jing Lian, Auteur Année de publication : 2011 Article en page(s) : pp. 1413-1421 Note générale : Génie Aérospatial Langues : Anglais (eng) Mots-clés : Fuzzy logic controller Gas-assisted injection modeling Self-organizing fuzzy Index. décimale : 629.1 Résumé : This study designed and constructed a gas-assisted injection molding system and incorporated it into a traditional injection molding machine. This combined system was referred to as the “gas-assisted injection molding combination system” (GAIMCS). The GAIMCS has complicated and uncertain dynamics, so it is impractical to design model-based controllers for this kind of system. To address this problem, this work developed a model-free self-organizing fuzzy controller (SOFC) to control the GAIMCS and evaluated its control performance. The SOFC has learning ability, which can regulate fuzzy control rules in real time during the control process. The initial fuzzy control rules for the SOFC can be set to zero before the onset of learning. The SOFC achieved better control performance than the fuzzy logic controller or the proportional-integral-derivative controller for high-pressure gas control in the GAIMCS, as confirmed by the experimental results. DEWEY : 629.1 ISSN : 1063-6536 En ligne : http://ieeexplore.ieee.org/xpl/freeabs_all.jsp?arnumber=5392980 [article] Self-organizing fuzzy controller for gas-assisted injection molding combination systems [texte imprimé] / Jeen Lin, Auteur ; Ruey-Jing Lian, Auteur . - 2011 . - pp. 1413-1421. Génie Aérospatial Langues : Anglais (eng) in IEEE Transactions on control systems technology > Vol. 18 N° 6 (Novembre 2010) . - pp. 1413-1421 Mots-clés : Fuzzy logic controller Gas-assisted injection modeling Self-organizing fuzzy Index. décimale : 629.1 Résumé : This study designed and constructed a gas-assisted injection molding system and incorporated it into a traditional injection molding machine. This combined system was referred to as the “gas-assisted injection molding combination system” (GAIMCS). The GAIMCS has complicated and uncertain dynamics, so it is impractical to design model-based controllers for this kind of system. To address this problem, this work developed a model-free self-organizing fuzzy controller (SOFC) to control the GAIMCS and evaluated its control performance. The SOFC has learning ability, which can regulate fuzzy control rules in real time during the control process. The initial fuzzy control rules for the SOFC can be set to zero before the onset of learning. The SOFC achieved better control performance than the fuzzy logic controller or the proportional-integral-derivative controller for high-pressure gas control in the GAIMCS, as confirmed by the experimental results. DEWEY : 629.1 ISSN : 1063-6536 En ligne : http://ieeexplore.ieee.org/xpl/freeabs_all.jsp?arnumber=5392980

Exemplaires

Code-barres	Cote	Support	Localisation	Section	Disponibilité
aucun exemplaire