Documents disponibles écrits par cet auteur

Comparison of filter smoke number and elemental carbon mass from partially premixed low temperature combustion in a direct-injection diesel engine / William F. Northrop in Transactions of the ASME . Journal of engineering for gas turbines and power, Vol. 133 N° 10 (Octobre 2011) 

Public ISBD [article]  in Transactions of the ASME . Journal of engineering for gas turbines and power > Vol. 133 N° 10 (Octobre 2011) . - 06 p. Titre : Comparison of filter smoke number and elemental carbon mass from partially premixed low temperature combustion in a direct-injection diesel engine Type de document : texte imprimé Auteurs : William F. Northrop, Auteur ; Stanislav V. Bohac, Auteur ; Jo-Yu Chin, Auteur Année de publication : 2011 Article en page(s) : 06 p. Note générale : Génie mécanique Langues : Anglais (eng) Mots-clés : Air  pollution  Biofuel  Carbon  Combustion  Diesel  engines  Nitrogen  compounds  Petroleum  Soot Index. décimale : 620.1 Essais des matériaux. Défauts des matériaux. Protection des matériaux Résumé : Partially premixed low temperature combustion (LTC) is an established advanced engine strategy that enables the simultaneous reduction of soot and NOx emissions in diesel engines. Measuring extremely low levels of soot emissions achievable with LTC modes using a filter smoke meter requires large sample volumes and repeated measurements to achieve the desired data precision and accuracy. Even taking such measures, doubt exists as to whether filter smoke number (FSN) accurately represents the actual smoke emissions emitted from such low soot conditions. The use of alternative fuels such as biodiesel also compounds efforts to accurately report soot emissions since the reflectivity of high levels of organic matter found on the particulate matter collected may result in erroneous readings from the optical detector. Using FSN, it is desired to report mass emissions of soot using empirical correlations derived for use with petroleum diesel fuels and conventional modes of combustion. The work presented in this paper compares the experimental results of well known formulas for calculating the mass of soot using FSN and the elemental carbon mass using thermal optical analysis (TOA) over a range of operating conditions and fuels from a four-cylinder direct-injection passenger car diesel engine. The data show that the mass of soot emitted by the engine can be accurately predicted with the smoke meter method utilizing a 3000 ml sample volume over a range of FSN from 0.02 to 1.5. Soot mass exhaust concentration calculated from FSN using the best of the literature expressions and that from TOA taken over all conditions correlated linearly with a slope of 0.99 and R2 value of 0.94. A primary implication of the work is that the level of confidence in reporting the soot mass based on FSN for low soot formation regimes such as LTC is improved for both petroleum diesel and biodiesel fuels. DEWEY : 620.1 ISSN : 0742-4795 En ligne : http://asmedl.aip.org/getabs/servlet/GetabsServlet?prog=normal&id=JETPEZ00013300 [...] [article] Comparison of filter smoke number and elemental carbon mass from partially premixed low temperature combustion in a direct-injection diesel engine [texte imprimé] / William F. Northrop, Auteur ; Stanislav V. Bohac, Auteur ; Jo-Yu Chin, Auteur . - 2011 . - 06 p. Génie mécanique Langues : Anglais (eng) in Transactions of the ASME . Journal of engineering for gas turbines and power > Vol. 133 N° 10 (Octobre 2011) . - 06 p. Mots-clés : Air  pollution  Biofuel  Carbon  Combustion  Diesel  engines  Nitrogen  compounds  Petroleum  Soot Index. décimale : 620.1 Essais des matériaux. Défauts des matériaux. Protection des matériaux Résumé : Partially premixed low temperature combustion (LTC) is an established advanced engine strategy that enables the simultaneous reduction of soot and NOx emissions in diesel engines. Measuring extremely low levels of soot emissions achievable with LTC modes using a filter smoke meter requires large sample volumes and repeated measurements to achieve the desired data precision and accuracy. Even taking such measures, doubt exists as to whether filter smoke number (FSN) accurately represents the actual smoke emissions emitted from such low soot conditions. The use of alternative fuels such as biodiesel also compounds efforts to accurately report soot emissions since the reflectivity of high levels of organic matter found on the particulate matter collected may result in erroneous readings from the optical detector. Using FSN, it is desired to report mass emissions of soot using empirical correlations derived for use with petroleum diesel fuels and conventional modes of combustion. The work presented in this paper compares the experimental results of well known formulas for calculating the mass of soot using FSN and the elemental carbon mass using thermal optical analysis (TOA) over a range of operating conditions and fuels from a four-cylinder direct-injection passenger car diesel engine. The data show that the mass of soot emitted by the engine can be accurately predicted with the smoke meter method utilizing a 3000 ml sample volume over a range of FSN from 0.02 to 1.5. Soot mass exhaust concentration calculated from FSN using the best of the literature expressions and that from TOA taken over all conditions correlated linearly with a slope of 0.99 and R2 value of 0.94. A primary implication of the work is that the level of confidence in reporting the soot mass based on FSN for low soot formation regimes such as LTC is improved for both petroleum diesel and biodiesel fuels. DEWEY : 620.1 ISSN : 0742-4795 En ligne : http://asmedl.aip.org/getabs/servlet/GetabsServlet?prog=normal&id=JETPEZ00013300 [...]

Investigation of hydrogen emissions in partially premixed diesel combustion / William F. Northrop in Transactions of the ASME . Journal of engineering for gas turbines and power, Vol. 132 N° 11 (Novembre 2010) 

Public ISBD [article]  in Transactions of the ASME . Journal of engineering for gas turbines and power > Vol. 132 N° 11 (Novembre 2010) . - 06 p. Titre : Investigation of hydrogen emissions in partially premixed diesel combustion Type de document : texte imprimé Auteurs : William F. Northrop, Auteur ; Lucas M. Vanderpool, Auteur ; Praveen V. Madathil, Auteur Année de publication : 2011 Article en page(s) : 06 p. Note générale : Génie Mécanique Langues : Anglais (eng) Mots-clés : Biofuel  Diesel  engines  Petroleum Index. décimale : 620.1 Essais des matériaux. Défauts des matériaux. Protection des matériaux Résumé : Partially premixed combustion strategies offer many advantages for compression ignition engines. One such advantage for those operating on diesel fuels is the simultaneous reduction in soot and NOx achievable over a wide range of equivalence ratios. Though often not measured in engine experiments, gaseous H2 is a byproduct of incomplete combustion and can be useful for the regeneration of aftertreatment devices. Correlations for the exhaust concentration of H2, mostly derived from experiments with homogeneous spark ignition engines, indicate that it is emitted either in proportion to CO directly or as a function of a pseudowater gas shift equilibrium constant. In this work, H2 is measured over a range of equivalence ratios in a multicylinder diesel engine operating in a partially premixed low temperature combustion (LTC) mode using both low sulfur diesel fuel and soy-based biodiesel. Biodiesel was found to have the same bulk gas emissions of major species including H2 over the range of equivalence ratio in LTC for a constant load and combustion phasing. It also was found that the experimental H2 concentration was near the value predicted by the equilibrium constant for equivalence ratios greater that 0.85 but was increasingly lower for leaner points. DEWEY : 620.1 ISSN : 0742-4795 En ligne : scitation.aip.org/getabs/servlet/GetabsServlet?prog=normal&id=JETPEZ000132000011 [...] [article] Investigation of hydrogen emissions in partially premixed diesel combustion [texte imprimé] / William F. Northrop, Auteur ; Lucas M. Vanderpool, Auteur ; Praveen V. Madathil, Auteur . - 2011 . - 06 p. Génie Mécanique Langues : Anglais (eng) in Transactions of the ASME . Journal of engineering for gas turbines and power > Vol. 132 N° 11 (Novembre 2010) . - 06 p. Mots-clés : Biofuel  Diesel  engines  Petroleum Index. décimale : 620.1 Essais des matériaux. Défauts des matériaux. Protection des matériaux Résumé : Partially premixed combustion strategies offer many advantages for compression ignition engines. One such advantage for those operating on diesel fuels is the simultaneous reduction in soot and NOx achievable over a wide range of equivalence ratios. Though often not measured in engine experiments, gaseous H2 is a byproduct of incomplete combustion and can be useful for the regeneration of aftertreatment devices. Correlations for the exhaust concentration of H2, mostly derived from experiments with homogeneous spark ignition engines, indicate that it is emitted either in proportion to CO directly or as a function of a pseudowater gas shift equilibrium constant. In this work, H2 is measured over a range of equivalence ratios in a multicylinder diesel engine operating in a partially premixed low temperature combustion (LTC) mode using both low sulfur diesel fuel and soy-based biodiesel. Biodiesel was found to have the same bulk gas emissions of major species including H2 over the range of equivalence ratio in LTC for a constant load and combustion phasing. It also was found that the experimental H2 concentration was near the value predicted by the equilibrium constant for equivalence ratios greater that 0.85 but was increasingly lower for leaner points. DEWEY : 620.1 ISSN : 0742-4795 En ligne : scitation.aip.org/getabs/servlet/GetabsServlet?prog=normal&id=JETPEZ000132000011 [...]