Documents disponibles écrits par cet auteur

Modeling of scroll compressors – improvements / Marie-Eve Duprez in International journal of refrigeration, Vol. 33 N° 4 (Juin 2010) 

Public ISBD [article]  in International journal of refrigeration > Vol. 33 N° 4 (Juin 2010) . - pp. 721-728 Titre : Modeling of scroll compressors – improvements Titre original : Modélisation des compresseurs à spirale - améliorations Type de document : texte imprimé Auteurs : Marie-Eve Duprez, Auteur ; Eric Dumont, Auteur ; Marc Frère, Auteur Année de publication : 2010 Article en page(s) : pp. 721-728 Note générale : Génie Mécanique Langues : Anglais (eng) Mots-clés : Screw  compressor  Heat  pump  Review  Improvement  Modelling  Flow  Energy  consumption  Heat  transfer Index. décimale : 621.5 Energie pneumatique. Machinerie et outils. Réfrigération Résumé : This paper presents an improvement of the scroll compressors model previously published by Duprez et al. (2007). This improved model allows the calculation of refrigerant mass flow rate, power consumption and heat flow rate that would be released at the condenser of a heat pump equipped with the compressor, from the knowledge of operating conditions and parameters. Both basic and improved models have been tested on scroll compressors using different refrigerants. This study has been limited to compressors with a maximum electrical power of 14 kW and for evaporation temperatures ranging from −40 to 15 °C and condensation temperatures from 10 to 75 °C. The average discrepancies on mass flow rate, power consumption and heat flow rate are respectively 0.50%, 0.93% and 3.49%. Using a global parameter determination (based on several refrigerants data), this model can predict the behavior of a compressor with another fluid for which no manufacturer data are available. DEWEY : 621.5 ISSN : 0140-7007 En ligne : http://www.sciencedirect.com/science/article/pii/S014070071000006X [article] Modeling of scroll compressors – improvements = Modélisation des compresseurs à spirale - améliorations [texte imprimé] / Marie-Eve Duprez, Auteur ; Eric Dumont, Auteur ; Marc Frère, Auteur . - 2010 . - pp. 721-728. Génie Mécanique Langues : Anglais (eng) in International journal of refrigeration > Vol. 33 N° 4 (Juin 2010) . - pp. 721-728 Mots-clés : Screw  compressor  Heat  pump  Review  Improvement  Modelling  Flow  Energy  consumption  Heat  transfer Index. décimale : 621.5 Energie pneumatique. Machinerie et outils. Réfrigération Résumé : This paper presents an improvement of the scroll compressors model previously published by Duprez et al. (2007). This improved model allows the calculation of refrigerant mass flow rate, power consumption and heat flow rate that would be released at the condenser of a heat pump equipped with the compressor, from the knowledge of operating conditions and parameters. Both basic and improved models have been tested on scroll compressors using different refrigerants. This study has been limited to compressors with a maximum electrical power of 14 kW and for evaporation temperatures ranging from −40 to 15 °C and condensation temperatures from 10 to 75 °C. The average discrepancies on mass flow rate, power consumption and heat flow rate are respectively 0.50%, 0.93% and 3.49%. Using a global parameter determination (based on several refrigerants data), this model can predict the behavior of a compressor with another fluid for which no manufacturer data are available. DEWEY : 621.5 ISSN : 0140-7007 En ligne : http://www.sciencedirect.com/science/article/pii/S014070071000006X