Documents disponibles écrits par cet auteur

Continuous process for recycling silane cross-linked polyethylene using supercritical alcohol and extruders / Toshiharu Goto in Industrial & engineering chemistry research, Vol. 50 N° 9 (Mai 2011) 

Public ISBD [article]  in Industrial & engineering chemistry research > Vol. 50 N° 9 (Mai 2011) . - pp. 5661-5666 Titre : Continuous process for recycling silane cross-linked polyethylene using supercritical alcohol and extruders Type de document : texte imprimé Auteurs : Toshiharu Goto, Auteur ; Shingo Ashihara, Auteur ; Takanori Yamazaki, Auteur Année de publication : 2011 Article en page(s) : pp. 5661-5666 Note générale : Chimie industrielle Langues : Anglais (eng) Mots-clés : Extruder  Supercritical  state  Recycling  Continuous  process Résumé : In this study, we developed a continuous process using extruders in a pilot plant for recycling silane cross-linked polyethylene (silane-XLPE) via chemical reaction in supercritical alcohol. As a first step, an autoclave was employed to reveal the effects of temperature and pressure on the reaction that selectively decomposes the siloxane cross-linking bonds. Selective decomposition of the siloxane bond was found to occur in the supercritical alcohol. In the next step, an extruder was used to continuously feed silane-XLPE into a tube reactor containing supercritical alcohol. Silane-XLPE was then extruded with an injection of supercritical alcohol. Alcohol remained in the supercritical state inside the cylinders of the extruder and the tube reactor. The recycled polyethylene (PE) was continuously extruded from the reactor at a rate of 14 kg/h. The product produced by this continuous process was the same as that from the autoclave. The mechanical properties of the recycled PE satisfied the requirements for use as a wire and cable insulation material. These results suggest that the extruder proved to be useful for the continuous denaturation of a cross-linked polymer in supercritical alcohol. DEWEY : 660 ISSN : 0888-5885 En ligne : http://cat.inist.fr/?aModele=afficheN&cpsidt=24128691 [article] Continuous process for recycling silane cross-linked polyethylene using supercritical alcohol and extruders [texte imprimé] / Toshiharu Goto, Auteur ; Shingo Ashihara, Auteur ; Takanori Yamazaki, Auteur . - 2011 . - pp. 5661-5666. Chimie industrielle Langues : Anglais (eng) in Industrial & engineering chemistry research > Vol. 50 N° 9 (Mai 2011) . - pp. 5661-5666 Mots-clés : Extruder  Supercritical  state  Recycling  Continuous  process Résumé : In this study, we developed a continuous process using extruders in a pilot plant for recycling silane cross-linked polyethylene (silane-XLPE) via chemical reaction in supercritical alcohol. As a first step, an autoclave was employed to reveal the effects of temperature and pressure on the reaction that selectively decomposes the siloxane cross-linking bonds. Selective decomposition of the siloxane bond was found to occur in the supercritical alcohol. In the next step, an extruder was used to continuously feed silane-XLPE into a tube reactor containing supercritical alcohol. Silane-XLPE was then extruded with an injection of supercritical alcohol. Alcohol remained in the supercritical state inside the cylinders of the extruder and the tube reactor. The recycled polyethylene (PE) was continuously extruded from the reactor at a rate of 14 kg/h. The product produced by this continuous process was the same as that from the autoclave. The mechanical properties of the recycled PE satisfied the requirements for use as a wire and cable insulation material. These results suggest that the extruder proved to be useful for the continuous denaturation of a cross-linked polymer in supercritical alcohol. DEWEY : 660 ISSN : 0888-5885 En ligne : http://cat.inist.fr/?aModele=afficheN&cpsidt=24128691

Use of single - screw extruder for continuous silane cross - linked polyethylene recycling process using supercritical alcohol / Toshiharu Goto in Industrial & engineering chemistry research, Vol. 51 N° 19 (Mai 2012) 

Public ISBD [article]  in Industrial & engineering chemistry research > Vol. 51 N° 19 (Mai 2012) . - pp. 6967–6971 Titre : Use of single - screw extruder for continuous silane cross - linked polyethylene recycling process using supercritical alcohol Type de document : texte imprimé Auteurs : Toshiharu Goto, Auteur ; Shingo Ashihara, Auteur ; Manabu Kato, Auteur Année de publication : 2012 Article en page(s) : pp. 6967–6971 Note générale : Industrial chemistry Langues : Anglais (eng) Mots-clés : Twin-screw  extruder  Supercritical  fluids Résumé : The development of a continuous process for supercritical fluids is desirable for high-pressure technology. In a previous study, it was revealed that a twin-screw extruder was applicable as the reactor and feeder for industrial supercritical fluid processes (Goto, T.; et al. Ind. Eng. Chem. Res. 2011, 50, 5661–5666). The advantages of twin-screw extruders include their conveying ability and flexibility of design, which make them ideal for research on the applications of extruder. However, twin-screw extruders are expensive because of their complicated gearbox, cylinder shape, screw, etc. Here we report that a single-screw extruder, which is less expensive and simpler than a twin-screw extruder, is also applicable as the reactor and feeder for commercial supercritical fluid processes. Moreover, the equipment for a single-screw extruder is more compact than that of a twin-screw extruder. The results of this study will promote the application of extruders in supercritical fluid engineering research and contribute to the industrialization of a wide range of supercritical fluid techniques. ISSN : 0888-5885 En ligne : http://pubs.acs.org/doi/abs/10.1021/ie202303y [article] Use of single - screw extruder for continuous silane cross - linked polyethylene recycling process using supercritical alcohol [texte imprimé] / Toshiharu Goto, Auteur ; Shingo Ashihara, Auteur ; Manabu Kato, Auteur . - 2012 . - pp. 6967–6971. Industrial chemistry Langues : Anglais (eng) in Industrial & engineering chemistry research > Vol. 51 N° 19 (Mai 2012) . - pp. 6967–6971 Mots-clés : Twin-screw  extruder  Supercritical  fluids Résumé : The development of a continuous process for supercritical fluids is desirable for high-pressure technology. In a previous study, it was revealed that a twin-screw extruder was applicable as the reactor and feeder for industrial supercritical fluid processes (Goto, T.; et al. Ind. Eng. Chem. Res. 2011, 50, 5661–5666). The advantages of twin-screw extruders include their conveying ability and flexibility of design, which make them ideal for research on the applications of extruder. However, twin-screw extruders are expensive because of their complicated gearbox, cylinder shape, screw, etc. Here we report that a single-screw extruder, which is less expensive and simpler than a twin-screw extruder, is also applicable as the reactor and feeder for commercial supercritical fluid processes. Moreover, the equipment for a single-screw extruder is more compact than that of a twin-screw extruder. The results of this study will promote the application of extruders in supercritical fluid engineering research and contribute to the industrialization of a wide range of supercritical fluid techniques. ISSN : 0888-5885 En ligne : http://pubs.acs.org/doi/abs/10.1021/ie202303y