Vapor-pressure measurements and modeling of dipentaerythritol ester lubricants / Josefa Garcia in Industrial & engineering chemistry research, Vol. 50 N° 8 (Avril 2011)  

Public ISBD [article]  inIndustrial & engineering chemistry research > Vol. 50 N° 8 (Avril 2011) . - pp. 4231–4237 Titre : Vapor-pressure measurements and modeling of dipentaerythritol ester lubricants Type de document : texte imprimé Auteurs : Josefa Garcia, Auteur ; Ramy Abou Naccoul, Auteur ; Josefa Fernandez, Auteur Année de publication : 2011 Article en page(s) : pp. 4231–4237 Note générale : Chimie industrielle Langues : Anglais (eng) Mots-clés : Lubricants Vapor pressure measurements Résumé : The aim of this work is to present new vapor-pressure measurements and provide a good description of the volumetric and phase behavior of dipentaerythritol ester (DiPEs) lubricants, using the Statistical Associating Fluid Theory (SAFT) model (PC-SAFT and SAFT-VR versions). Characteristic parameters of these versions were optimized for dipentaerythritol hexapentanoate (DiPEC5), dipentaerythritol hexaheptanoate (DiPEC7), and dipentaerythritol isononanoate (DiPEiC9), using experimental vapor pressures and densities. With these parameters, compressed densities were predicted. Experimental vapor pressures, determined by a gas saturation apparatus, range between 2 × 10−5 Pa and 16 Pa, whereas the absolute deviations obtained in the correlations for both versions of the model (PC-SAFT and SAFT-VR) are between 10−6 Pa and 1 Pa. In the case of saturated densities, the average absolute deviation (AAD) values, for both models, range from 0.2% to 1.3%, except for DiPEC7, where the AAD is 4.4% when using the SAFT-VR model. The SAFT-VR version gives slightly better correlations, although we must note that this version has four parameters, whereas the PC-SAFT version has three. DEWEY : 660 ISSN : 0888-5885 En ligne : http://pubs.acs.org/doi/abs/10.1021/ie102166r [article] Vapor-pressure measurements and modeling of dipentaerythritol ester lubricants [texte imprimé] / Josefa Garcia, Auteur ; Ramy Abou Naccoul, Auteur ; Josefa Fernandez, Auteur . - 2011 . - pp. 4231–4237. Chimie industrielle Langues : Anglais (eng) in Industrial & engineering chemistry research > Vol. 50 N° 8 (Avril 2011) . - pp. 4231–4237 Mots-clés : Lubricants Vapor pressure measurements Résumé : The aim of this work is to present new vapor-pressure measurements and provide a good description of the volumetric and phase behavior of dipentaerythritol ester (DiPEs) lubricants, using the Statistical Associating Fluid Theory (SAFT) model (PC-SAFT and SAFT-VR versions). Characteristic parameters of these versions were optimized for dipentaerythritol hexapentanoate (DiPEC5), dipentaerythritol hexaheptanoate (DiPEC7), and dipentaerythritol isononanoate (DiPEiC9), using experimental vapor pressures and densities. With these parameters, compressed densities were predicted. Experimental vapor pressures, determined by a gas saturation apparatus, range between 2 × 10−5 Pa and 16 Pa, whereas the absolute deviations obtained in the correlations for both versions of the model (PC-SAFT and SAFT-VR) are between 10−6 Pa and 1 Pa. In the case of saturated densities, the average absolute deviation (AAD) values, for both models, range from 0.2% to 1.3%, except for DiPEC7, where the AAD is 4.4% when using the SAFT-VR model. The SAFT-VR version gives slightly better correlations, although we must note that this version has four parameters, whereas the PC-SAFT version has three. DEWEY : 660 ISSN : 0888-5885 En ligne : http://pubs.acs.org/doi/abs/10.1021/ie102166r

Exemplaires

Code-barres	Cote	Support	Localisation	Section	Disponibilité
aucun exemplaire