Documents disponibles écrits par cet auteur

A dynamic, distributed model of shell-and-tube heat exchangers undergoing crude oil fouling / Francesco Coletti in Industrial & engineering chemistry research, Vol. 50 N° 8 (Avril 2011) 

Public ISBD [article]  in Industrial & engineering chemistry research > Vol. 50 N° 8 (Avril 2011) . - pp.4515–4533 Titre : A dynamic, distributed model of shell-and-tube heat exchangers undergoing crude oil fouling Type de document : texte imprimé Auteurs : Francesco Coletti, Auteur ; Sandro Macchietto, Auteur Année de publication : 2011 Article en page(s) : pp.4515–4533 Note générale : Chimie industrielle Langues : Anglais (eng) Mots-clés : Dynamic  Heat  exchangers Résumé : Fouling in refinery preheat trains causes major energy inefficiencies, resulting in increased costs, greenhouse gas emissions, maintenance efforts, and safety hazards. Fouling deposition is not well understood, and current exchanger design and monitoring practices neglect the local effects and dynamics of fouling, in favor of lumped, steady-state, heuristic models (e.g., Tubular Exchanger Manufacturers Association (TEMA) fouling factors). In this paper, a dynamic, distributed model for a multipass shell-and-tube heat exchanger undergoing crude oil fouling is proposed. The model calculates fouling rates as a function of local conditions and time. It accounts for heat exchanger geometry, variation of oil physical properties with temperature, local accumulation of fouling deposits, and their structural change over time (aging). The interaction between fouling growth and fluid dynamics inside the tubes is accounted for by solving a moving boundary problem. Moreover, a procedure to analyze refinery data and support the estimation of a set of model parameters has been established. The model is validated using data from an ExxonMobil refinery and shows excellent agreement (less than 2% error) with primary plant measurements even when it is tested for its predictive capabilities over long periods (i.e., 1 year). It is concluded that the model can be used with confidence to identify and predict the fouling state of exchangers, to assess economic losses due to fouling, to support operating decisions such as planning of cleaning schedules, and to assist in the design and retrofit of heat exchangers. DEWEY : 660 ISSN : 0888-5885 En ligne : http://pubs.acs.org/doi/abs/10.1021/ie901991g [article] A dynamic, distributed model of shell-and-tube heat exchangers undergoing crude oil fouling [texte imprimé] / Francesco Coletti, Auteur ; Sandro Macchietto, Auteur . - 2011 . - pp.4515–4533. Chimie industrielle Langues : Anglais (eng) in Industrial & engineering chemistry research > Vol. 50 N° 8 (Avril 2011) . - pp.4515–4533 Mots-clés : Dynamic  Heat  exchangers Résumé : Fouling in refinery preheat trains causes major energy inefficiencies, resulting in increased costs, greenhouse gas emissions, maintenance efforts, and safety hazards. Fouling deposition is not well understood, and current exchanger design and monitoring practices neglect the local effects and dynamics of fouling, in favor of lumped, steady-state, heuristic models (e.g., Tubular Exchanger Manufacturers Association (TEMA) fouling factors). In this paper, a dynamic, distributed model for a multipass shell-and-tube heat exchanger undergoing crude oil fouling is proposed. The model calculates fouling rates as a function of local conditions and time. It accounts for heat exchanger geometry, variation of oil physical properties with temperature, local accumulation of fouling deposits, and their structural change over time (aging). The interaction between fouling growth and fluid dynamics inside the tubes is accounted for by solving a moving boundary problem. Moreover, a procedure to analyze refinery data and support the estimation of a set of model parameters has been established. The model is validated using data from an ExxonMobil refinery and shows excellent agreement (less than 2% error) with primary plant measurements even when it is tested for its predictive capabilities over long periods (i.e., 1 year). It is concluded that the model can be used with confidence to identify and predict the fouling state of exchangers, to assess economic losses due to fouling, to support operating decisions such as planning of cleaning schedules, and to assist in the design and retrofit of heat exchangers. DEWEY : 660 ISSN : 0888-5885 En ligne : http://pubs.acs.org/doi/abs/10.1021/ie901991g