Documents disponibles écrits par cet auteur

Constrained inverse fluidization of light particles in a draft tube airlift reactor / Ivana M. Šijacki in Industrial & engineering chemistry research, Vol. 48 N° 9 (Mai 2009) 

Public ISBD [article]  in Industrial & engineering chemistry research > Vol. 48 N° 9 (Mai 2009) . - pp. 4611–4618 Titre : Constrained inverse fluidization of light particles in a draft tube airlift reactor Type de document : texte imprimé Auteurs : Ivana M. Šijacki, Auteur ; Radmilo R. Colovic, Auteur ; Bojan Petkovic, Auteur Année de publication : 2009 Article en page(s) : pp. 4611–4618 Note générale : Chemical enginerring Langues : Anglais (eng) Mots-clés : Inverse  fluidized  bed  Draft  tube  airlift  reactor  Liquid  phase  Aqueous  solution Résumé : The objective of this work was to investigate the main fluidodynamic behavior of a constrained inverse fluidized bed in a draft tube airlift reactor (DT-ALR), with liquid in batch and air in continuous mode. The inverse fluidized bed was formed of relatively large particles (4.3−5.4 mm) that were composed of light polyethylene (PE), in the first case, and of particles (3.7−4.7 mm) that were composed of extremely light polystyrene (PS), in the second case. The influence of physical properties of liquid phase (surface tension and viscosity) on basic fluidodynamic characteristics was examined using the coalescence-inhibiting medium (1 wt % aqueous solution of ethanol) and viscous medium (46 wt % aqueous solution of sucrose). It is shown that the overall gas holdup, induced liquid velocity, minimum fluidization velocity, and bed expansion are dependent on the superficial gas velocity and liquid and solid properties. En ligne : http://pubs.acs.org/doi/abs/10.1021/ie801915m [article] Constrained inverse fluidization of light particles in a draft tube airlift reactor [texte imprimé] / Ivana M. Šijacki, Auteur ; Radmilo R. Colovic, Auteur ; Bojan Petkovic, Auteur . - 2009 . - pp. 4611–4618. Chemical enginerring Langues : Anglais (eng) in Industrial & engineering chemistry research > Vol. 48 N° 9 (Mai 2009) . - pp. 4611–4618 Mots-clés : Inverse  fluidized  bed  Draft  tube  airlift  reactor  Liquid  phase  Aqueous  solution Résumé : The objective of this work was to investigate the main fluidodynamic behavior of a constrained inverse fluidized bed in a draft tube airlift reactor (DT-ALR), with liquid in batch and air in continuous mode. The inverse fluidized bed was formed of relatively large particles (4.3−5.4 mm) that were composed of light polyethylene (PE), in the first case, and of particles (3.7−4.7 mm) that were composed of extremely light polystyrene (PS), in the second case. The influence of physical properties of liquid phase (surface tension and viscosity) on basic fluidodynamic characteristics was examined using the coalescence-inhibiting medium (1 wt % aqueous solution of ethanol) and viscous medium (46 wt % aqueous solution of sucrose). It is shown that the overall gas holdup, induced liquid velocity, minimum fluidization velocity, and bed expansion are dependent on the superficial gas velocity and liquid and solid properties. En ligne : http://pubs.acs.org/doi/abs/10.1021/ie801915m

Sparger type influence on the hydrodynamics of the draft tube airlift reactor with diluted alcohol - solutions / Ivana M. Šijacki in Industrial & engineering chemistry research, Vol. 50 N° 6 (Mars 2011) 

Public ISBD [article]  in Industrial & engineering chemistry research > Vol. 50 N° 6 (Mars 2011) . - pp. 3580-3591 Titre : Sparger type influence on the hydrodynamics of the draft tube airlift reactor with diluted alcohol - solutions Type de document : texte imprimé Auteurs : Ivana M. Šijacki, Auteur ; Milenko S. Tokic, Auteur ; Predrag S. Kojic, Auteur Année de publication : 2011 Article en page(s) : pp. 3580-3591 Note générale : Chimie industrielle Langues : Anglais (eng) Mots-clés : Bioreactor  Alcoholic  solution  Airlift  reactor  Draft  tube  Hydrodynamics Résumé : The objective of this work was to investigate the influence of normal aliphatic alcohols (from methanol to n-octanol) and the gas sparger type (single orifice, perforated plate, and sinter plate) on the hydrodynamics of a draft tube airlift reactor. The results showed that the presence of alcohols led to both an increase in the gas holdup and reduction of the downcomer liquid velocity, in comparison to the values obtained in water. The type of gas sparger also changed the hydrodynamic behavior-the gas holdup increased with dispersion effectiveness, from single orifice to sinter plate, while the effect on the downcomer liquid velocity was in conjunction with the liquid phase properties. Simple correlations were developed to predict the gas holdup and the downcomer liquid velocity. Beside the gas superficial velocity, the proposed correlations include the surface tension gradient, as a unique parameter which represents the liquid phase properties, and sparger related variables: the ratio of the sparger's total openings area and the draft tube cross-sectional area and also orifice (pore) size of the sparger. DEWEY : 660 ISSN : 0888-5885 En ligne : http://cat.inist.fr/?aModele=afficheN&cpsidt=23944526 [article] Sparger type influence on the hydrodynamics of the draft tube airlift reactor with diluted alcohol - solutions [texte imprimé] / Ivana M. Šijacki, Auteur ; Milenko S. Tokic, Auteur ; Predrag S. Kojic, Auteur . - 2011 . - pp. 3580-3591. Chimie industrielle Langues : Anglais (eng) in Industrial & engineering chemistry research > Vol. 50 N° 6 (Mars 2011) . - pp. 3580-3591 Mots-clés : Bioreactor  Alcoholic  solution  Airlift  reactor  Draft  tube  Hydrodynamics Résumé : The objective of this work was to investigate the influence of normal aliphatic alcohols (from methanol to n-octanol) and the gas sparger type (single orifice, perforated plate, and sinter plate) on the hydrodynamics of a draft tube airlift reactor. The results showed that the presence of alcohols led to both an increase in the gas holdup and reduction of the downcomer liquid velocity, in comparison to the values obtained in water. The type of gas sparger also changed the hydrodynamic behavior-the gas holdup increased with dispersion effectiveness, from single orifice to sinter plate, while the effect on the downcomer liquid velocity was in conjunction with the liquid phase properties. Simple correlations were developed to predict the gas holdup and the downcomer liquid velocity. Beside the gas superficial velocity, the proposed correlations include the surface tension gradient, as a unique parameter which represents the liquid phase properties, and sparger related variables: the ratio of the sparger's total openings area and the draft tube cross-sectional area and also orifice (pore) size of the sparger. DEWEY : 660 ISSN : 0888-5885 En ligne : http://cat.inist.fr/?aModele=afficheN&cpsidt=23944526