[article]
| Titre : |
Modeling and control of thermal printing |
| Type de document : |
texte imprimé |
| Auteurs : |
Kristian Nolde, Auteur ; Manfred Morari, Auteur |
| Année de publication : |
2011 |
| Article en page(s) : |
pp. 405-413 |
| Note générale : |
Génie Aérospatial |
| Langues : |
Anglais (eng) |
| Mots-clés : |
Lookup table Model predictive control Printhead Switched system Thermal printing Wiener model |
| Index. décimale : |
629.1 |
| Résumé : |
In this paper, we present the development of an optimal controller for thermal printheads. A first-order linear system and a nonlinear output mapping with stochastic noise is proposed as a model of the printing dynamics. The model parameters are identified and an optimal control problem is formulated to determine the printhead input. The control algorithm is successfully tested on a standard thermal printer. A sensitivity analysis is performed by simulations and experiments to analyze the printing quality on varying setups with different printheads, printing media and ribbons. A tuning strategy is derived to adapt to changing setups without having to recompute an optimization problem. The performance of the control system for a wide range of operating systems is observed in experiments. Comparing the proposed controller to a current control implementation shows a significant quality gain in barcode readability (ISO/IEC 15416).
|
| DEWEY : |
629.1 |
| ISSN : |
1063-6536 |
| En ligne : |
http://ieeexplore.ieee.org/xpl/freeabs_all.jsp?arnumber=5152951 |
in IEEE Transactions on control systems technology > Vol. 18 N° 2 (Mars 2010) . - pp. 405-413
[article] Modeling and control of thermal printing [texte imprimé] / Kristian Nolde, Auteur ; Manfred Morari, Auteur . - 2011 . - pp. 405-413. Génie Aérospatial Langues : Anglais ( eng) in IEEE Transactions on control systems technology > Vol. 18 N° 2 (Mars 2010) . - pp. 405-413
| Mots-clés : |
Lookup table Model predictive control Printhead Switched system Thermal printing Wiener model |
| Index. décimale : |
629.1 |
| Résumé : |
In this paper, we present the development of an optimal controller for thermal printheads. A first-order linear system and a nonlinear output mapping with stochastic noise is proposed as a model of the printing dynamics. The model parameters are identified and an optimal control problem is formulated to determine the printhead input. The control algorithm is successfully tested on a standard thermal printer. A sensitivity analysis is performed by simulations and experiments to analyze the printing quality on varying setups with different printheads, printing media and ribbons. A tuning strategy is derived to adapt to changing setups without having to recompute an optimization problem. The performance of the control system for a wide range of operating systems is observed in experiments. Comparing the proposed controller to a current control implementation shows a significant quality gain in barcode readability (ISO/IEC 15416).
|
| DEWEY : |
629.1 |
| ISSN : |
1063-6536 |
| En ligne : |
http://ieeexplore.ieee.org/xpl/freeabs_all.jsp?arnumber=5152951 |
|
Ajouter le résultat dans votre panier Faire une suggestion Affiner la rechercheModeling and control of thermal printing in IEEE Transactions on control systems technology, Vol. 18 N° 2 (Mars 2010)
