Les Inscriptions à la Bibliothèque sont ouvertes en
ligne via le site: https://biblio.enp.edu.dz
Les Réinscriptions se font à :
• La Bibliothèque Annexe pour les étudiants en
2ème Année CPST
• La Bibliothèque Centrale pour les étudiants en Spécialités
A partir de cette page vous pouvez :
Retourner au premier écran avec les recherches... |
Détail de l'auteur
Auteur R. Lancellotta
Documents disponibles écrits par cet auteur
Affiner la rechercheInfluence of grading on the mechanical behaviour of Stava tailings / A. Carrera in Géotechnique, Vol. 61 N° 11 (Novembre 2010)
[article]
in Géotechnique > Vol. 61 N° 11 (Novembre 2010) . - pp. 935-946
Titre : Influence of grading on the mechanical behaviour of Stava tailings Type de document : texte imprimé Auteurs : A. Carrera, Auteur ; M. Coop, Auteur ; R. Lancellotta, Auteur Année de publication : 2011 Article en page(s) : pp. 935-946 Note générale : Génie Civil Langues : Anglais (eng) Mots-clés : Dams Liquefaction Sands Compressibility Laboratory tests Silts Index. décimale : 624 Constructions du génie civil et du bâtiment. Infrastructures. Ouvrages en terres. Fondations. Tunnels. Ponts et charpentes Résumé : Tailings dams can be fragile structures and too often they are subject to liquefaction. The material they are composed of is rather peculiar, having a man-made origin, and their behaviour is still not very well understood. The soil from the Stava tailings dams, structures that were subject to liquefaction in 1985 causing extensive destruction, was investigated in this study as an example of tailings. Two main aspects of their behaviour have been examined: the influence of the percentage of silt and sand that compose the soil on its mechanical behaviour, and the susceptibility to liquefaction, analysing the behaviour within a critical state framework. In this paper it is shown that, as the quantity of silt increases, the slope and intercept of the normal compression line and critical state line at higher pressures decrease until an inversion of behaviour is observed, while at lower stress levels the critical state line changes its position but not its slope. This means that the effect of adding silt on the critical state line location at low stresses is disconnected from that at high stresses. The analysis of liquefaction within a critical state framework was found to provide a simple explanation for the patterns of behaviour that are typical of static liquefaction. Three classes of behaviour related to the current void ratio and stress state of the soil were identified.
DEWEY : 624.15 ISSN : 0016-8505 En ligne : http://www.icevirtuallibrary.com/content/article/10.1680/geot.9.p.009 [article] Influence of grading on the mechanical behaviour of Stava tailings [texte imprimé] / A. Carrera, Auteur ; M. Coop, Auteur ; R. Lancellotta, Auteur . - 2011 . - pp. 935-946.
Génie Civil
Langues : Anglais (eng)
in Géotechnique > Vol. 61 N° 11 (Novembre 2010) . - pp. 935-946
Mots-clés : Dams Liquefaction Sands Compressibility Laboratory tests Silts Index. décimale : 624 Constructions du génie civil et du bâtiment. Infrastructures. Ouvrages en terres. Fondations. Tunnels. Ponts et charpentes Résumé : Tailings dams can be fragile structures and too often they are subject to liquefaction. The material they are composed of is rather peculiar, having a man-made origin, and their behaviour is still not very well understood. The soil from the Stava tailings dams, structures that were subject to liquefaction in 1985 causing extensive destruction, was investigated in this study as an example of tailings. Two main aspects of their behaviour have been examined: the influence of the percentage of silt and sand that compose the soil on its mechanical behaviour, and the susceptibility to liquefaction, analysing the behaviour within a critical state framework. In this paper it is shown that, as the quantity of silt increases, the slope and intercept of the normal compression line and critical state line at higher pressures decrease until an inversion of behaviour is observed, while at lower stress levels the critical state line changes its position but not its slope. This means that the effect of adding silt on the critical state line location at low stresses is disconnected from that at high stresses. The analysis of liquefaction within a critical state framework was found to provide a simple explanation for the patterns of behaviour that are typical of static liquefaction. Three classes of behaviour related to the current void ratio and stress state of the soil were identified.
DEWEY : 624.15 ISSN : 0016-8505 En ligne : http://www.icevirtuallibrary.com/content/article/10.1680/geot.9.p.009 Plane slope failures in the Langhe region of Italy / G. Bottino in Géotechnique, Vol. 61 N° 10 (Octobre 2010)
[article]
in Géotechnique > Vol. 61 N° 10 (Octobre 2010) . - pp. 845-859
Titre : Plane slope failures in the Langhe region of Italy Type de document : texte imprimé Auteurs : G. Bottino, Auteur ; S. Chighini, Auteur ; R. Lancellotta, Auteur Année de publication : 2011 Article en page(s) : pp. 845-859 Note générale : Génie Civil Langues : Anglais (eng) Mots-clés : Landslides Case history Mineralogy Clays Shear strength Geology Index. décimale : 624 Constructions du génie civil et du bâtiment. Infrastructures. Ouvrages en terres. Fondations. Tunnels. Ponts et charpentes Résumé : Widespread plane slope failures have occurred in the hilly Langhe region (NW Italy) over the past two centuries and more recently in November 1994. The 1994 event caused the deaths of 20 people and major damage to properties. This paper is a description of the landslides that occurred in connection to flexural slip. The causes of the phenomena are discussed in detail, including the variation of the residual strength along the shear surface as a result of specific geological, chemical and mineralogical conditions. After examining the phenomena that contribute to create slide-prone slopes, the paper concentrates on the driving mechanisms applying to the case histories investigated.
DEWEY : 624.15 ISSN : 0016-8505 En ligne : http://www.icevirtuallibrary.com/content/article/10.1680/geot.7.00168 [article] Plane slope failures in the Langhe region of Italy [texte imprimé] / G. Bottino, Auteur ; S. Chighini, Auteur ; R. Lancellotta, Auteur . - 2011 . - pp. 845-859.
Génie Civil
Langues : Anglais (eng)
in Géotechnique > Vol. 61 N° 10 (Octobre 2010) . - pp. 845-859
Mots-clés : Landslides Case history Mineralogy Clays Shear strength Geology Index. décimale : 624 Constructions du génie civil et du bâtiment. Infrastructures. Ouvrages en terres. Fondations. Tunnels. Ponts et charpentes Résumé : Widespread plane slope failures have occurred in the hilly Langhe region (NW Italy) over the past two centuries and more recently in November 1994. The 1994 event caused the deaths of 20 people and major damage to properties. This paper is a description of the landslides that occurred in connection to flexural slip. The causes of the phenomena are discussed in detail, including the variation of the residual strength along the shear surface as a result of specific geological, chemical and mineralogical conditions. After examining the phenomena that contribute to create slide-prone slopes, the paper concentrates on the driving mechanisms applying to the case histories investigated.
DEWEY : 624.15 ISSN : 0016-8505 En ligne : http://www.icevirtuallibrary.com/content/article/10.1680/geot.7.00168