[article]
Titre : |
Research on air-source heat pump coupled with economized vapor injection scroll compressor and ejector |
Titre original : |
Recherches sur une pompe à chaleur air-eau couplée à un compresseur à spirale et un éjecteur à injection de vapeur muni d'un économiseur |
Type de document : |
texte imprimé |
Auteurs : |
Xu Shuxue, Auteur ; Ma Guoyuan, Auteur |
Année de publication : |
2011 |
Article en page(s) : |
pp. 1587-1595 |
Note générale : |
Génie Mécanique |
Langues : |
Anglais (eng) |
Mots-clés : |
Heat pump Air-source Scroll compressor Injection Ejector Design Calculation |
Index. décimale : |
621.5 Energie pneumatique. Machinerie et outils. Réfrigération |
Résumé : |
The performance of the heat pump can be improved further when running under low temperature conditions when an ejector is used in a heat pump system coupled with economized vapor injection (EVI) scroll compressor. In this paper, the design method of the heat pump system with ejector (EVIe) is presented, and the process for designing the heat pump with ejector has been summarized. The optimal location of the vapor injection inlets is at the place where the vapor can inject into the working chambers when they just be closed. The reasonable value for the entrainment ratio u of the ejector is between 0.1 and 0.2. One prototype heat pump was designed under the condition of the evaporation temperature of −20 °C, and an experimental setup was established to test the prototype. The measured results demonstrated that the heating EER of the heat pump system with ejector could reach about 4% higher than that of the system without ejector when the heating capacity remained nearly constant. |
DEWEY : |
621.5 |
ISSN : |
0140-7007 |
En ligne : |
http://www.sciencedirect.com/science/article/pii/S0140700710001192 |
in International journal of refrigeration > Vol. 34 N° 7 (Novembre 2011) . - pp. 1587-1595
[article] Research on air-source heat pump coupled with economized vapor injection scroll compressor and ejector = Recherches sur une pompe à chaleur air-eau couplée à un compresseur à spirale et un éjecteur à injection de vapeur muni d'un économiseur [texte imprimé] / Xu Shuxue, Auteur ; Ma Guoyuan, Auteur . - 2011 . - pp. 1587-1595. Génie Mécanique Langues : Anglais ( eng) in International journal of refrigeration > Vol. 34 N° 7 (Novembre 2011) . - pp. 1587-1595
Mots-clés : |
Heat pump Air-source Scroll compressor Injection Ejector Design Calculation |
Index. décimale : |
621.5 Energie pneumatique. Machinerie et outils. Réfrigération |
Résumé : |
The performance of the heat pump can be improved further when running under low temperature conditions when an ejector is used in a heat pump system coupled with economized vapor injection (EVI) scroll compressor. In this paper, the design method of the heat pump system with ejector (EVIe) is presented, and the process for designing the heat pump with ejector has been summarized. The optimal location of the vapor injection inlets is at the place where the vapor can inject into the working chambers when they just be closed. The reasonable value for the entrainment ratio u of the ejector is between 0.1 and 0.2. One prototype heat pump was designed under the condition of the evaporation temperature of −20 °C, and an experimental setup was established to test the prototype. The measured results demonstrated that the heating EER of the heat pump system with ejector could reach about 4% higher than that of the system without ejector when the heating capacity remained nearly constant. |
DEWEY : |
621.5 |
ISSN : |
0140-7007 |
En ligne : |
http://www.sciencedirect.com/science/article/pii/S0140700710001192 |
|