Fouling - free membranes obtained by facile surface modification of commercially available membranes using the dynamic forming method / Kazuki Akamatsu in Industrial & engineering chemistry research, Vol. 50 N° 21 (Novembre 2011)  

Public ISBD [article]  inIndustrial & engineering chemistry research > Vol. 50 N° 21 (Novembre 2011) . - pp. 12281-12284 Titre : Fouling - free membranes obtained by facile surface modification of commercially available membranes using the dynamic forming method Type de document : texte imprimé Auteurs : Kazuki Akamatsu, Auteur ; Keita Mitsumori, Auteur ; Fang Han, Auteur Année de publication : 2011 Article en page(s) : pp. 12281-12284 Note générale : Chimie industrielle Langues : Anglais (eng) Mots-clés : Fouling Résumé : The dynamic forming method was first employed for the preparation of fouling-free membranes. The copolymer of 1-carboxy-N,N-dimethyl-N-(2'-methacryloyloxyethyl) methanaminium inner salt and n-butyl methacrylate was selected for the surface modification polymer to realize the fouling-free property in this study, and its aqueous solution was filtered using a commercially available ultrafiltration membrane. The surface modification polymer was thus deposited on the ultrafiltration membrane in a facile manner over several minutes. Compared to the unmodified membrane, the dynamically formed membrane with the surface modification polymer layer proved to have excellent fouling resistance against 1000 ppm bovine serum albumin (BSA) solution. In particular, the dynamically formed membrane was hardly fouled and maintained its initial flux when the filtration flux was set below 6 × 10-6 m3 m-2 s-1. DEWEY : 660 ISSN : 0888-5885 En ligne : http://cat.inist.fr/?aModele=afficheN&cpsidt=24697548 [article] Fouling - free membranes obtained by facile surface modification of commercially available membranes using the dynamic forming method [texte imprimé] / Kazuki Akamatsu, Auteur ; Keita Mitsumori, Auteur ; Fang Han, Auteur . - 2011 . - pp. 12281-12284. Chimie industrielle Langues : Anglais (eng) in Industrial & engineering chemistry research > Vol. 50 N° 21 (Novembre 2011) . - pp. 12281-12284 Mots-clés : Fouling Résumé : The dynamic forming method was first employed for the preparation of fouling-free membranes. The copolymer of 1-carboxy-N,N-dimethyl-N-(2'-methacryloyloxyethyl) methanaminium inner salt and n-butyl methacrylate was selected for the surface modification polymer to realize the fouling-free property in this study, and its aqueous solution was filtered using a commercially available ultrafiltration membrane. The surface modification polymer was thus deposited on the ultrafiltration membrane in a facile manner over several minutes. Compared to the unmodified membrane, the dynamically formed membrane with the surface modification polymer layer proved to have excellent fouling resistance against 1000 ppm bovine serum albumin (BSA) solution. In particular, the dynamically formed membrane was hardly fouled and maintained its initial flux when the filtration flux was set below 6 × 10-6 m3 m-2 s-1. DEWEY : 660 ISSN : 0888-5885 En ligne : http://cat.inist.fr/?aModele=afficheN&cpsidt=24697548

Exemplaires

Code-barres	Cote	Support	Localisation	Section	Disponibilité
aucun exemplaire