[article]
Titre : |
Physicochemical characteristics of hollow fiber structured packings in isopropanol / water distillation |
Type de document : |
texte imprimé |
Auteurs : |
Zhihong Yang, Auteur ; Guoliang Zhang, Auteur ; Feini Liu, Auteur |
Année de publication : |
2011 |
Article en page(s) : |
pp. 11594–11601 |
Note générale : |
Chimie industrielle |
Langues : |
Anglais (eng) |
Mots-clés : |
Fiber Water Distillation |
Résumé : |
Three kinds of hollow fiber membrane contactors, polyether sulfone (PES), polysulfone (PS), and polypropylene (PP), were applied in IPA/water distillation to check how the material and structure of membranes would affect the performance. The Hansen solubility parameter (HSP) was calculated to analyze the compatibility between polymers and IPA in operation. It was found that a hydrophobic asymmetric microporous membrane coating thin dense layer on the liquid side with good compatibility worked better in the process, while the membrane with interconnected porous morphology was more favorable for decreasing Rm and more sensitive to vapor load, which might worsen operation stability. Even a slight wetting ( |
DEWEY : |
660 |
ISSN : |
0888-5885 |
En ligne : |
http://pubs.acs.org/doi/abs/10.1021/ie100437e |
in Industrial & engineering chemistry research > Vol. 49 N° 22 (Novembre 2010) . - pp. 11594–11601
[article] Physicochemical characteristics of hollow fiber structured packings in isopropanol / water distillation [texte imprimé] / Zhihong Yang, Auteur ; Guoliang Zhang, Auteur ; Feini Liu, Auteur . - 2011 . - pp. 11594–11601. Chimie industrielle Langues : Anglais ( eng) in Industrial & engineering chemistry research > Vol. 49 N° 22 (Novembre 2010) . - pp. 11594–11601
Mots-clés : |
Fiber Water Distillation |
Résumé : |
Three kinds of hollow fiber membrane contactors, polyether sulfone (PES), polysulfone (PS), and polypropylene (PP), were applied in IPA/water distillation to check how the material and structure of membranes would affect the performance. The Hansen solubility parameter (HSP) was calculated to analyze the compatibility between polymers and IPA in operation. It was found that a hydrophobic asymmetric microporous membrane coating thin dense layer on the liquid side with good compatibility worked better in the process, while the membrane with interconnected porous morphology was more favorable for decreasing Rm and more sensitive to vapor load, which might worsen operation stability. Even a slight wetting ( |
DEWEY : |
660 |
ISSN : |
0888-5885 |
En ligne : |
http://pubs.acs.org/doi/abs/10.1021/ie100437e |
|