Les Inscriptions à la Bibliothèque sont ouvertes en
ligne via le site: https://biblio.enp.edu.dz
Les Réinscriptions se font à :
• La Bibliothèque Annexe pour les étudiants en
2ème Année CPST
• La Bibliothèque Centrale pour les étudiants en Spécialités
A partir de cette page vous pouvez :
| Retourner au premier écran avec les recherches... |
Détail de l'auteur
Auteur M. Ameri
Documents disponibles écrits par cet auteur
Affiner la rechercheEnergy and exergy analysis of a photovoltaic-thermal collector with natural air flow / A. Shahsavar in Transactions of the ASME. Journal of solar energy engineering, Vol. 133 N° 1 (Fevrier 2011)
in Transactions of the ASME. Journal of solar energy engineering > Vol. 133 N° 1 (Fevrier 2011) . - 10 p.
Titre : Energy and exergy analysis of a photovoltaic-thermal collector with natural air flow Type de document : texte imprimé Auteurs : A. Shahsavar, Auteur ; M. Ameri, Auteur ; M. Gholampour, Auteur Année de publication : 2012 Article en page(s) : 10 p. Note générale : Solar energy Langues : Anglais (eng) Mots-clés : Exergy Photovoltaic cells Solar absorber-convertors Index. décimale : 621.47 Résumé : The objective of present work is to analyze the energy and the exergy performance of a naturally ventilated photovoltaic-thermal (PV/T) air collector which is designed, manufactured and tested at a geographic location of Kerman, Iran. This PV/T collector is tested in both glazed and unglazed types. In this system, a thin metal sheet is used to improve heat extraction from the PV panels and consequently achieving higher thermal and electrical output. The metal sheet is suspended at the middle of an air channel in the studied PV/T air configuration. A theoretical model is developed and validated against experimental data, where good agreement between the predicted results and measured data is achieved. The validated model is then used to study the effect of the solar radiation, channel depth, collector length, and PV cell efficiency on total energy and exergy efficiency of the studied system. DEWEY : 621.47 ISSN : 0199-6231 En ligne : http://asmedl.org/getabs/servlet/GetabsServlet?prog=normal&id=JSEEDO000134000001 [...] [article] Energy and exergy analysis of a photovoltaic-thermal collector with natural air flow [texte imprimé] / A. Shahsavar, Auteur ; M. Ameri, Auteur ; M. Gholampour, Auteur . - 2012 . - 10 p.
Solar energy
Langues : Anglais (eng)
in Transactions of the ASME. Journal of solar energy engineering > Vol. 133 N° 1 (Fevrier 2011) . - 10 p.
Mots-clés : Exergy Photovoltaic cells Solar absorber-convertors Index. décimale : 621.47 Résumé : The objective of present work is to analyze the energy and the exergy performance of a naturally ventilated photovoltaic-thermal (PV/T) air collector which is designed, manufactured and tested at a geographic location of Kerman, Iran. This PV/T collector is tested in both glazed and unglazed types. In this system, a thin metal sheet is used to improve heat extraction from the PV panels and consequently achieving higher thermal and electrical output. The metal sheet is suspended at the middle of an air channel in the studied PV/T air configuration. A theoretical model is developed and validated against experimental data, where good agreement between the predicted results and measured data is achieved. The validated model is then used to study the effect of the solar radiation, channel depth, collector length, and PV cell efficiency on total energy and exergy efficiency of the studied system. DEWEY : 621.47 ISSN : 0199-6231 En ligne : http://asmedl.org/getabs/servlet/GetabsServlet?prog=normal&id=JSEEDO000134000001 [...]
in Transactions of the ASME. Journal of solar energy engineering > Vol. 134 N° 1 (Janvier/Fevrier 2012) . - 10 p.
Titre : Energy and Exergy Analysis of a Photovoltaic-Thermal Collector With Natural Air Flow Type de document : texte imprimé Auteurs : A. Shahsavar, Auteur ; M. Ameri, Auteur ; M. Gholampour, Auteur Année de publication : 2012 Article en page(s) : 10 p. Note générale : Solar energy Langues : Anglais (eng) Mots-clés : Exergy, Photovoltaic cells, Solar absorber-convertors Résumé : The objective of present work is to analyze the energy and the exergy performance of a naturally ventilated photovoltaic-thermal (PV/T) air collector which is designed, manufactured and tested at a geographic location of Kerman, Iran. This PV/T collector is tested in both glazed and unglazed types. In this system, a thin metal sheet is used to improve heat extraction from the PV panels and consequently achieving higher thermal and electrical output. The metal sheet is suspended at the middle of an air channel in the studied PV/T air configuration. A theoretical model is developed and validated against experimental data, where good agreement between the predicted results and measured data is achieved. The validated model is then used to study the effect of the solar radiation, channel depth, collector length, and PV cell efficiency on total energy and exergy efficiency of the studied system. DEWEY : 621.47 ISSN : 0199-6231 En ligne : http://asmedl.org/getabs/servlet/GetabsServlet?prog=normal&id=JSEEDO000134000001 [...] [article] Energy and Exergy Analysis of a Photovoltaic-Thermal Collector With Natural Air Flow [texte imprimé] / A. Shahsavar, Auteur ; M. Ameri, Auteur ; M. Gholampour, Auteur . - 2012 . - 10 p.
Solar energy
Langues : Anglais (eng)
in Transactions of the ASME. Journal of solar energy engineering > Vol. 134 N° 1 (Janvier/Fevrier 2012) . - 10 p.
Mots-clés : Exergy, Photovoltaic cells, Solar absorber-convertors Résumé : The objective of present work is to analyze the energy and the exergy performance of a naturally ventilated photovoltaic-thermal (PV/T) air collector which is designed, manufactured and tested at a geographic location of Kerman, Iran. This PV/T collector is tested in both glazed and unglazed types. In this system, a thin metal sheet is used to improve heat extraction from the PV panels and consequently achieving higher thermal and electrical output. The metal sheet is suspended at the middle of an air channel in the studied PV/T air configuration. A theoretical model is developed and validated against experimental data, where good agreement between the predicted results and measured data is achieved. The validated model is then used to study the effect of the solar radiation, channel depth, collector length, and PV cell efficiency on total energy and exergy efficiency of the studied system. DEWEY : 621.47 ISSN : 0199-6231 En ligne : http://asmedl.org/getabs/servlet/GetabsServlet?prog=normal&id=JSEEDO000134000001 [...]
in Transactions of the ASME. Journal of solar energy engineering > Vol. 133 N° 1 (Fevrier 2011) . - 04 p.
Titre : The effect of booster reflectors on the photovoltaic water pumping system performance Type de document : texte imprimé Auteurs : H. Tabaei, Auteur ; M. Ameri, Auteur Année de publication : 2012 Article en page(s) : 04 p. Note générale : Solar energy Langues : Anglais (eng) Mots-clés : Aluminium Pumps Solar absorber-convertors Solar cells Solar energy concentrators Stainless steel Index. décimale : 621.47 Résumé : In this work, the experimental results of a designed and installed photovoltaic water pump system with static concentrator are presented. The tests have been conducted in outdoor condition in Kerman (Latitude 30 deg 17[prime] and longitude 57 deg 50[prime]), Iran. The performance of photovoltaic water pumping system is evaluated for both stainless steel 304 and aluminum foil reflectors. Through this study, it is found that the performance of the photovoltaic (PV) water pumping system was improved by using these two types of reflectors; but results show that aluminum foil reflector is more efficient than stainless steel 304 reflector. Measurements indicate that output power from the PV panels can be increased in the order of 14% and 8.5% due to the use of aluminum foil and stainless steel 304 reflectors, respectively. DEWEY : 621.47 ISSN : 0199-6231 En ligne : http://asmedl.org/getabs/servlet/GetabsServlet?prog=normal&id=JSEEDO000134000001 [...] [article] The effect of booster reflectors on the photovoltaic water pumping system performance [texte imprimé] / H. Tabaei, Auteur ; M. Ameri, Auteur . - 2012 . - 04 p.
Solar energy
Langues : Anglais (eng)
in Transactions of the ASME. Journal of solar energy engineering > Vol. 133 N° 1 (Fevrier 2011) . - 04 p.
Mots-clés : Aluminium Pumps Solar absorber-convertors Solar cells Solar energy concentrators Stainless steel Index. décimale : 621.47 Résumé : In this work, the experimental results of a designed and installed photovoltaic water pump system with static concentrator are presented. The tests have been conducted in outdoor condition in Kerman (Latitude 30 deg 17[prime] and longitude 57 deg 50[prime]), Iran. The performance of photovoltaic water pumping system is evaluated for both stainless steel 304 and aluminum foil reflectors. Through this study, it is found that the performance of the photovoltaic (PV) water pumping system was improved by using these two types of reflectors; but results show that aluminum foil reflector is more efficient than stainless steel 304 reflector. Measurements indicate that output power from the PV panels can be increased in the order of 14% and 8.5% due to the use of aluminum foil and stainless steel 304 reflectors, respectively. DEWEY : 621.47 ISSN : 0199-6231 En ligne : http://asmedl.org/getabs/servlet/GetabsServlet?prog=normal&id=JSEEDO000134000001 [...]
in Transactions of the ASME. Journal of solar energy engineering > Vol. 134 N° 1 (Janvier/Fevrier 2012) . - 4 p.
Titre : The effect of booster reflectors on the photovoltaic water pumping system performance Type de document : texte imprimé Auteurs : H. Tabaei, Auteur ; M. Ameri, Auteur Année de publication : 2012 Article en page(s) : 4 p. Note générale : Solar energy Langues : Anglais (eng) Mots-clés : Aluminium, Pumps, Solar absorber-convertors, Solar cells, Solar energy concentrators, Stainless steel Résumé : In this work, the experimental results of a designed and installed photovoltaic water pump system with static concentrator are presented. The tests have been conducted in outdoor condition in Kerman (Latitude 30 deg 17[prime] and longitude 57 deg 50[prime]), Iran. The performance of photovoltaic water pumping system is evaluated for both stainless steel 304 and aluminum foil reflectors. Through this study, it is found that the performance of the photovoltaic (PV) water pumping system was improved by using these two types of reflectors; but results show that aluminum foil reflector is more efficient than stainless steel 304 reflector. Measurements indicate that output power from the PV panels can be increased in the order of 14% and 8.5% due to the use of aluminum foil and stainless steel 304 reflectors, respectively. DEWEY : 621.47 ISSN : 0199-6231 En ligne : http://asmedl.org/getabs/servlet/GetabsServlet?prog=normal&id=JSEEDO000134000001 [...] [article] The effect of booster reflectors on the photovoltaic water pumping system performance [texte imprimé] / H. Tabaei, Auteur ; M. Ameri, Auteur . - 2012 . - 4 p.
Solar energy
Langues : Anglais (eng)
in Transactions of the ASME. Journal of solar energy engineering > Vol. 134 N° 1 (Janvier/Fevrier 2012) . - 4 p.
Mots-clés : Aluminium, Pumps, Solar absorber-convertors, Solar cells, Solar energy concentrators, Stainless steel Résumé : In this work, the experimental results of a designed and installed photovoltaic water pump system with static concentrator are presented. The tests have been conducted in outdoor condition in Kerman (Latitude 30 deg 17[prime] and longitude 57 deg 50[prime]), Iran. The performance of photovoltaic water pumping system is evaluated for both stainless steel 304 and aluminum foil reflectors. Through this study, it is found that the performance of the photovoltaic (PV) water pumping system was improved by using these two types of reflectors; but results show that aluminum foil reflector is more efficient than stainless steel 304 reflector. Measurements indicate that output power from the PV panels can be increased in the order of 14% and 8.5% due to the use of aluminum foil and stainless steel 304 reflectors, respectively. DEWEY : 621.47 ISSN : 0199-6231 En ligne : http://asmedl.org/getabs/servlet/GetabsServlet?prog=normal&id=JSEEDO000134000001 [...]
