Motion analysis of micropart in dry friction environment due to surface excitation considering microscale forces / M. Rizwan in Transactions of the ASME . Journal of tribology, Vol. 133 N° 4 (Octobre 2011)  

Public ISBD [article]  inTransactions of the ASME . Journal of tribology > Vol. 133 N° 4 (Octobre 2011) . - 12 p. Titre : Motion analysis of micropart in dry friction environment due to surface excitation considering microscale forces Type de document : texte imprimé Auteurs : M. Rizwan, Auteur ; P. S. Shiakolas, Auteur Année de publication : 2012 Article en page(s) : 12 p. Note générale : Tribology Langues : Anglais (eng) Mots-clés : Deformation Friction Mechanical contact Micromechanics Surface roughness Index. décimale : 621.5 Energie pneumatique. Machinerie et outils. Réfrigération Résumé : This manuscript investigates the motion of a micropart on a dry nonlubricated controlled deformable surface considering the dynamically changing microforces while in contact with the surface. The motion analysis of a micropart on a flexible surface under controlled deformation is the first step to initiate feasibility of a micromanipulation device. At the micro/nanoscale, the surface force of attraction becomes more significant than the inertia force; thus motion analysis requires estimating and accommodating these forces in a dynamic model. The model considers microscale forces and surface roughness conditions (asperity deformation), while dynamically evaluating the friction coefficient and attraction force due to the dynamic asperity deformation as the micropart moves on a controlled deformation active surface. The parameters considered in the model include the micropart mass and size, the relative roughness between the micropart and surface, the surface and micropart material, and input actuator frequency, stroke, and deformation profile. The simulation results indicate that predictable micropart motion could be achieved but only within a certain range of input actuator frequencies. At lower frequencies no motion is possible while at higher frequencies the micropart detaches from the surface. The understanding of the effects of the microforces on the dynamic model and micropart motion would pave the way towards controlled micropart translocation and manipulation employing a flexible surface for microassembly or for processes requiring controlled micropart handling for heterogeneous microdevice mass production. DEWEY : 621.5 ISSN : 0742-4787 En ligne : http://scitation.aip.org/getabs/servlet/GetabsServlet?prog=normal&id=JOTRE900013 [...] [article] Motion analysis of micropart in dry friction environment due to surface excitation considering microscale forces [texte imprimé] / M. Rizwan, Auteur ; P. S. Shiakolas, Auteur . - 2012 . - 12 p. Tribology Langues : Anglais (eng) in Transactions of the ASME . Journal of tribology > Vol. 133 N° 4 (Octobre 2011) . - 12 p. Mots-clés : Deformation Friction Mechanical contact Micromechanics Surface roughness Index. décimale : 621.5 Energie pneumatique. Machinerie et outils. Réfrigération Résumé : This manuscript investigates the motion of a micropart on a dry nonlubricated controlled deformable surface considering the dynamically changing microforces while in contact with the surface. The motion analysis of a micropart on a flexible surface under controlled deformation is the first step to initiate feasibility of a micromanipulation device. At the micro/nanoscale, the surface force of attraction becomes more significant than the inertia force; thus motion analysis requires estimating and accommodating these forces in a dynamic model. The model considers microscale forces and surface roughness conditions (asperity deformation), while dynamically evaluating the friction coefficient and attraction force due to the dynamic asperity deformation as the micropart moves on a controlled deformation active surface. The parameters considered in the model include the micropart mass and size, the relative roughness between the micropart and surface, the surface and micropart material, and input actuator frequency, stroke, and deformation profile. The simulation results indicate that predictable micropart motion could be achieved but only within a certain range of input actuator frequencies. At lower frequencies no motion is possible while at higher frequencies the micropart detaches from the surface. The understanding of the effects of the microforces on the dynamic model and micropart motion would pave the way towards controlled micropart translocation and manipulation employing a flexible surface for microassembly or for processes requiring controlled micropart handling for heterogeneous microdevice mass production. DEWEY : 621.5 ISSN : 0742-4787 En ligne : http://scitation.aip.org/getabs/servlet/GetabsServlet?prog=normal&id=JOTRE900013 [...]

Exemplaires

Code-barres	Cote	Support	Localisation	Section	Disponibilité
aucun exemplaire