Documents disponibles écrits par cet auteur

Tribological characteristics of deformed magnesium alloy AZ61 under dry conditions / Abdel-Wahab El-Morsy in Transactions of the ASME . Journal of tribology, Vol. 133 N° 4 (Octobre 2011) 

Public ISBD [article]  in Transactions of the ASME . Journal of tribology > Vol. 133 N° 4 (Octobre 2011) . - 08 p. Titre : Tribological characteristics of deformed magnesium alloy AZ61 under dry conditions Type de document : texte imprimé Auteurs : Abdel-Wahab El-Morsy, Auteur ; A. Abouel-Kasem, Auteur Année de publication : 2012 Article en page(s) : 08 p. Note générale : Tribology Langues : Anglais (eng) Mots-clés : Deformation  Drying  Extrusion  Fractals  Internal  stresses  Magnesium  alloys  Stainless  steel  Wear Index. décimale : 621.5 Energie pneumatique. Machinerie et outils. Réfrigération Résumé : The wear behavior of deformed magnesium alloy AZ61 under dry conditions was evaluated. Two types of AZ61 alloy were used, extruded and rolled samples, to investigate the effect of deformation process on the wear behavior. The experiments were performed using a pin-on-ring type wear apparatus against a stainless-steel counterface under applied stresses in the range of 3–7 MPa, and within a sliding velocity range of 0.2–1.8 m/s. The topographical images of the eroded surfaces at different sliding velocity for extruded and rolled samples were quantified using fractal analysis. The results revealed that for all applied stress, the wear rates increased with increasing the sliding velocity of both samples. The wear rate of the rolled samples is greater than that of the extruded samples at the stress range from 3 to 5 MPa. However, when the stress is increased to 7 MPa the wear rate of the rolled samples is lower than that of the extruded samples. The variation of fractal value of slope of linearized power spectral density (PSD) with the sliding velocity is largely similar to the relationship between the wear rate and the sliding velocity. DEWEY : 621.5 ISSN : 0742-4787 En ligne : http://scitation.aip.org/getabs/servlet/GetabsServlet?prog=normal&id=JOTRE900013 [...] [article] Tribological characteristics of deformed magnesium alloy AZ61 under dry conditions [texte imprimé] / Abdel-Wahab El-Morsy, Auteur ; A. Abouel-Kasem, Auteur . - 2012 . - 08 p. Tribology Langues : Anglais (eng) in Transactions of the ASME . Journal of tribology > Vol. 133 N° 4 (Octobre 2011) . - 08 p. Mots-clés : Deformation  Drying  Extrusion  Fractals  Internal  stresses  Magnesium  alloys  Stainless  steel  Wear Index. décimale : 621.5 Energie pneumatique. Machinerie et outils. Réfrigération Résumé : The wear behavior of deformed magnesium alloy AZ61 under dry conditions was evaluated. Two types of AZ61 alloy were used, extruded and rolled samples, to investigate the effect of deformation process on the wear behavior. The experiments were performed using a pin-on-ring type wear apparatus against a stainless-steel counterface under applied stresses in the range of 3–7 MPa, and within a sliding velocity range of 0.2–1.8 m/s. The topographical images of the eroded surfaces at different sliding velocity for extruded and rolled samples were quantified using fractal analysis. The results revealed that for all applied stress, the wear rates increased with increasing the sliding velocity of both samples. The wear rate of the rolled samples is greater than that of the extruded samples at the stress range from 3 to 5 MPa. However, when the stress is increased to 7 MPa the wear rate of the rolled samples is lower than that of the extruded samples. The variation of fractal value of slope of linearized power spectral density (PSD) with the sliding velocity is largely similar to the relationship between the wear rate and the sliding velocity. DEWEY : 621.5 ISSN : 0742-4787 En ligne : http://scitation.aip.org/getabs/servlet/GetabsServlet?prog=normal&id=JOTRE900013 [...]