Tribological characteristics modification of magnetorheological fluid / Chul Hee Lee in Transactions of the ASME . Journal of tribology, Vol. 133 N° 3 (Juillet 2011)  

Public ISBD [article]  inTransactions of the ASME . Journal of tribology > Vol. 133 N° 3 (Juillet 2011) . - 06 p. Titre : Tribological characteristics modification of magnetorheological fluid Type de document : texte imprimé Auteurs : Chul Hee Lee, Auteur ; Deuk Won Lee, Auteur ; Jae Young Choi, Auteur Année de publication : 2012 Article en page(s) : 06 p. Note générale : Tribology Langues : Anglais (eng) Mots-clés : Carbon steel Differential scanning calorimetry Friction Magnetic fluids Magnetorheology Scanning electron microscopy Surface roughness Wear testing Index. décimale : 621.5 Energie pneumatique. Machinerie et outils. Réfrigération Résumé : Recently, research on the application of magnetorheological (MR) fluid in mechanical engineering has been widely expanded, while the performance of MR fluid in tribology has also been investigated. In this study, a modification of MR fluid, which is modified by adding certain additives, is attempted to improve tribological performance. After modification, wear and friction are measured by four-ball wear tester and linear-oscillation (SRV) tester under no magnetic fields. Subsequently, the oxidation induction time (OIT) is evaluated by pressure differential scanning calorimetry (PDSC). Then, to observe the tribological performance under magnetic fields, pin-on-disk test is conducted to confirm the effects of the commercial MR fluid and modified MR fluid on friction and wear in different operating and magnetic conditions. Also, the modification effects on surface roughness are investigated by using a profilometer. Moreover, the microscopic changes of surfaces and MR particles are investigated by using scanning electron microscopy (SEM). DEWEY : 621.5 ISSN : 0742-4787 En ligne : http://scitation.aip.org/getabs/servlet/GetabsServlet?prog=normal&id=JOTRE900013 [...] [article] Tribological characteristics modification of magnetorheological fluid [texte imprimé] / Chul Hee Lee, Auteur ; Deuk Won Lee, Auteur ; Jae Young Choi, Auteur . - 2012 . - 06 p. Tribology Langues : Anglais (eng) in Transactions of the ASME . Journal of tribology > Vol. 133 N° 3 (Juillet 2011) . - 06 p. Mots-clés : Carbon steel Differential scanning calorimetry Friction Magnetic fluids Magnetorheology Scanning electron microscopy Surface roughness Wear testing Index. décimale : 621.5 Energie pneumatique. Machinerie et outils. Réfrigération Résumé : Recently, research on the application of magnetorheological (MR) fluid in mechanical engineering has been widely expanded, while the performance of MR fluid in tribology has also been investigated. In this study, a modification of MR fluid, which is modified by adding certain additives, is attempted to improve tribological performance. After modification, wear and friction are measured by four-ball wear tester and linear-oscillation (SRV) tester under no magnetic fields. Subsequently, the oxidation induction time (OIT) is evaluated by pressure differential scanning calorimetry (PDSC). Then, to observe the tribological performance under magnetic fields, pin-on-disk test is conducted to confirm the effects of the commercial MR fluid and modified MR fluid on friction and wear in different operating and magnetic conditions. Also, the modification effects on surface roughness are investigated by using a profilometer. Moreover, the microscopic changes of surfaces and MR particles are investigated by using scanning electron microscopy (SEM). DEWEY : 621.5 ISSN : 0742-4787 En ligne : http://scitation.aip.org/getabs/servlet/GetabsServlet?prog=normal&id=JOTRE900013 [...]

Exemplaires

Code-barres	Cote	Support	Localisation	Section	Disponibilité
aucun exemplaire