Mordant yellow 3 anions intercalated layered double hydroxides / Pinggui Tang in Industrial & engineering chemistry research, Vol. 51 N° 32 (Août 2012)  

Public ISBD [article]  inIndustrial & engineering chemistry research > Vol. 51 N° 32 (Août 2012) . - pp. 10542-10545 Titre : Mordant yellow 3 anions intercalated layered double hydroxides : Preparation, thermo - and photostability Type de document : texte imprimé Auteurs : Pinggui Tang, Auteur ; Fuping Deng, Auteur ; Yongjun Feng, Auteur Année de publication : 2012 Article en page(s) : pp. 10542-10545 Note générale : Industrial chemistry Langues : Anglais (eng) Mots-clés : Hydroxides Thermo photostability Résumé : Mordant yellow 3 (MY3) anions have been intercalated into Zn-Al layered double hydroxides (LDH) to produce a novel intercalation compound pigment by a direct coprecipitation method. The prepared composite was characterized by various techniques such as powder X-ray diffraction (PXRD), Fourier transform infrared spectroscopy (FT-IR), thermogravimetry and differential thermal analysis (TGA-DTA), and UV–vis spectroscopy. The obtained results show that MY3 anions were intercalated into the interlayer spacing of LDH as observed from PXRD and FT-IR. Furthermore, the intercalation of MY3 anions into the LDH markedly enhances the thermo- and photostability of MY3, which may enlarge the practical application fields of MY3 dye. ISSN : 0888-5885 En ligne : http://pubs.acs.org/doi/abs/10.1021/ie300645b [article] Mordant yellow 3 anions intercalated layered double hydroxides : Preparation, thermo - and photostability [texte imprimé] / Pinggui Tang, Auteur ; Fuping Deng, Auteur ; Yongjun Feng, Auteur . - 2012 . - pp. 10542-10545. Industrial chemistry Langues : Anglais (eng) in Industrial & engineering chemistry research > Vol. 51 N° 32 (Août 2012) . - pp. 10542-10545 Mots-clés : Hydroxides Thermo photostability Résumé : Mordant yellow 3 (MY3) anions have been intercalated into Zn-Al layered double hydroxides (LDH) to produce a novel intercalation compound pigment by a direct coprecipitation method. The prepared composite was characterized by various techniques such as powder X-ray diffraction (PXRD), Fourier transform infrared spectroscopy (FT-IR), thermogravimetry and differential thermal analysis (TGA-DTA), and UV–vis spectroscopy. The obtained results show that MY3 anions were intercalated into the interlayer spacing of LDH as observed from PXRD and FT-IR. Furthermore, the intercalation of MY3 anions into the LDH markedly enhances the thermo- and photostability of MY3, which may enlarge the practical application fields of MY3 dye. ISSN : 0888-5885 En ligne : http://pubs.acs.org/doi/abs/10.1021/ie300645b

Exemplaires

Code-barres	Cote	Support	Localisation	Section	Disponibilité
aucun exemplaire

Synthesis and UV Absorption Properties of Aurintricarboxylic Acid Intercalated Zn–Al Layered Double Hydroxides / Haifeng Zhu in Industrial & engineering chemistry research, Vol. 50 N° 23 (Décembre 2011)  

Public ISBD [article]  inIndustrial & engineering chemistry research > Vol. 50 N° 23 (Décembre 2011) . - pp. 13299–13303 Titre : Synthesis and UV Absorption Properties of Aurintricarboxylic Acid Intercalated Zn–Al Layered Double Hydroxides Type de document : texte imprimé Auteurs : Haifeng Zhu, Auteur ; Yongjun Feng, Auteur ; Pinggui Tang, Auteur Année de publication : 2012 Article en page(s) : pp. 13299–13303 Note générale : Chimie industrielle Langues : Anglais (eng) Mots-clés : Ultraviolet radiation Résumé : Aurintricarboxylic acid (ATA), a UV absorbent, has successfully been intercalated into the interlayer spacing of Zn-Al-NO3LDHs precursor through an anion-exchange reaction. The structure and the thermal- and photostability of the intercalated product were investigated by various techniques such as powder X-ray diffraction (XRD), infrared spectroscopy (FT-IR), thermogravimetry and differential thermal analysis (TG―DTA), and UV―vis spectroscopy. The increase of the basal spacing from 0.90 to 1.52 nm as observed by XRD suggests that the ATA anions have replaced the NO3― anions in the interlayer region of the precursor LDHs. The results of infrared spectroscopy and thermogravimetry and differential thermal analysis (TG―DTA) also reveal the presence of supramolecular host—guest interactions between the brucite-like sheet and the intercalated ATA anions. The intercalation of the ATA anions into the LDHs markedly enhances the thermal stability of this UV absorbent After incorporation of 1 wt % ZnAl-ATA-LDHs to polypropylene (PP), also, the resulted ZnAl-ATA-LDHs/PP composite has much higher resistance to UV degradation related to PP. DEWEY : 660 ISSN : 0888-5885 En ligne : http://cat.inist.fr/?aModele=afficheN&cpsidt=25267486 [article] Synthesis and UV Absorption Properties of Aurintricarboxylic Acid Intercalated Zn–Al Layered Double Hydroxides [texte imprimé] / Haifeng Zhu, Auteur ; Yongjun Feng, Auteur ; Pinggui Tang, Auteur . - 2012 . - pp. 13299–13303. Chimie industrielle Langues : Anglais (eng) in Industrial & engineering chemistry research > Vol. 50 N° 23 (Décembre 2011) . - pp. 13299–13303 Mots-clés : Ultraviolet radiation Résumé : Aurintricarboxylic acid (ATA), a UV absorbent, has successfully been intercalated into the interlayer spacing of Zn-Al-NO3LDHs precursor through an anion-exchange reaction. The structure and the thermal- and photostability of the intercalated product were investigated by various techniques such as powder X-ray diffraction (XRD), infrared spectroscopy (FT-IR), thermogravimetry and differential thermal analysis (TG―DTA), and UV―vis spectroscopy. The increase of the basal spacing from 0.90 to 1.52 nm as observed by XRD suggests that the ATA anions have replaced the NO3― anions in the interlayer region of the precursor LDHs. The results of infrared spectroscopy and thermogravimetry and differential thermal analysis (TG―DTA) also reveal the presence of supramolecular host—guest interactions between the brucite-like sheet and the intercalated ATA anions. The intercalation of the ATA anions into the LDHs markedly enhances the thermal stability of this UV absorbent After incorporation of 1 wt % ZnAl-ATA-LDHs to polypropylene (PP), also, the resulted ZnAl-ATA-LDHs/PP composite has much higher resistance to UV degradation related to PP. DEWEY : 660 ISSN : 0888-5885 En ligne : http://cat.inist.fr/?aModele=afficheN&cpsidt=25267486

Exemplaires

Code-barres	Cote	Support	Localisation	Section	Disponibilité
aucun exemplaire