Documents disponibles écrits par cet auteur

Dynamic behaviour and visco-elastic damage model of ultra-high performance cementitious composite / Jianzhong Lai in Cement and concrete research, Vol. 39 N° 11 (Novembre 2009) 

Public ISBD [article]  in Cement and concrete research > Vol. 39 N° 11 (Novembre 2009) . - pp. 1044–1051 Titre : Dynamic behaviour and visco-elastic damage model of ultra-high performance cementitious composite Type de document : texte imprimé Auteurs : Jianzhong Lai, Auteur ; Wei Sun, Auteur Année de publication : 2010 Article en page(s) : pp. 1044–1051 Note générale : Génie Civil Langues : Anglais (eng) Mots-clés : Cement  composite;  Mechanical  properties;  Fiber  reinforcement;  Modeling Index. décimale : 691 Matériaux de construction. Pièces et parties composantes Résumé : The dynamic behaviour of ultra-high performance cementitious composite (UHPCC) with compressive strength of 200 MPa with different steel fiber volume fractions was studied under impact using the split Hopkinson pressure bar. Three aspects of the testing: a gimbal device, wave shaping and direct strain measurement, were used to increase experimental accuracy. Results indicate that UHPCC has obvious strain rate effects. The peak stress, peak strain, elastic modulus and the area under the stress–strain curve increase with increasing strain rate. When the strain rate exceeds a threshold value, specimens with and without fibers begin to fracture. At high strain rate the unreinforced specimens fracture into small parts while fiber reinforced ones only have fine cracks on the edges. A visco-elastic damage model of UHPCC is proposed based on a nonlinear visco-elastic model (the ZWT model) and the material damage measured by the ultrasonic wave velocity method. DEWEY : 620.13 En ligne : http://www.sciencedirect.com/science/article/pii/S0008884609001720 [article] Dynamic behaviour and visco-elastic damage model of ultra-high performance cementitious composite [texte imprimé] / Jianzhong Lai, Auteur ; Wei Sun, Auteur . - 2010 . - pp. 1044–1051. Génie Civil Langues : Anglais (eng) in Cement and concrete research > Vol. 39 N° 11 (Novembre 2009) . - pp. 1044–1051 Mots-clés : Cement  composite;  Mechanical  properties;  Fiber  reinforcement;  Modeling Index. décimale : 691 Matériaux de construction. Pièces et parties composantes Résumé : The dynamic behaviour of ultra-high performance cementitious composite (UHPCC) with compressive strength of 200 MPa with different steel fiber volume fractions was studied under impact using the split Hopkinson pressure bar. Three aspects of the testing: a gimbal device, wave shaping and direct strain measurement, were used to increase experimental accuracy. Results indicate that UHPCC has obvious strain rate effects. The peak stress, peak strain, elastic modulus and the area under the stress–strain curve increase with increasing strain rate. When the strain rate exceeds a threshold value, specimens with and without fibers begin to fracture. At high strain rate the unreinforced specimens fracture into small parts while fiber reinforced ones only have fine cracks on the edges. A visco-elastic damage model of UHPCC is proposed based on a nonlinear visco-elastic model (the ZWT model) and the material damage measured by the ultrasonic wave velocity method. DEWEY : 620.13 En ligne : http://www.sciencedirect.com/science/article/pii/S0008884609001720